Learning Forum

[_aryaman]

I'm new to Ansys. I know how to create surface meshes, but am not able to figure out how to do meshing in an empty volume between two surfaces which is my flow domain.

I looked up a little and got to know that first I need to have a surface mesh and then through Fluent I can extend it to volume mesh, but am not able to get it how this has to be done. Could anyone please provide any relevant resource for this or is there any other way also possible?

[Keyur Kanade]

You can find SpaceClaim/Ansys Meshing/Fluent Meshing training material on Ansys Learning Hub with following links. ALH has much more training materials. If you already have gone through training, please ignore.

SpaceClaim:
https://jam8.sapjam.com/groups/cMRz3zgpbywe5foFBYreSV/overview_page/SqFHHFGBtaYAG6j0UdhPUM

Ansys Meshing:
https://jam8.sapjam.com/groups/cMRz3zgpbywe5foFBYreSV/overview_page/qSkDbTsHmWQHWzKwrMOGJM

Fluent Meshing Watertight Workflow:
https://jam8.sapjam.com/groups/cMRz3zgpbywe5foFBYreSV/overview_page/tc4dmupSDQKZe4n75tZfwU

[_aryaman]

Thankyou very much, but I use the student verion of Ansys not the commercial, so I believe I don't have access to Learning Hub. Anyways thankyou very much!

[Keyur Kanade]

Please check following videos

Ansys Meshing Sizing:
https://www.youtube.com/watch?v=w4q6q8nKF3U

DM Share topology:
https://www.youtube.com/watch?v=IO4ZtwZdD2I

SpaceClaim Share topology:
https://www.youtube.com/watch?v=h43E1YO1LiM

Fluent Meshing Watertight Workflow:
https://www.youtube.com/watch?v=aBxbYRVoRLo

Ansys Meshing: Decomposition for hex meshing:
https://www.youtube.com/watch?v=P19GOTQWmc0

[_aryaman]

Thankyou very much, these videos gave me some insight. I really appreciate it.