Learning Forum

[Deepak_296]

My console window is missing in Fluent solver. Due to this, I am unable to see mesh quality and other reports while working on fluent. Please help me to fix the issue.

[Rob]

Pictures would help, otherwise there's a view option top right of the panel, set to default and see if that brings it back.

[Deepak_296]

Thanks for your reply. I am unable to find the initialize option also. I need to scroll down further to get that but scroll option is also not there. Please help me to fix the issue of Console window and initialize option also. I am using Ansys 2020R2 on windows 10.

[Deepak_296]

I found the console in the "view" option at the top right of the panel. By default, the console is missing. There is an option to get the console below the "outline view" but not below the mesh. Is it because of Ansys 2020R2 because this was not the case in 2020R1?

[DrAmine]

Reset the view to default. In another post it seems that the issues are related to one another and that is now working for you on 21R1.

[Deepak_296]

Yes. I have installed 20R1 and it is working fine unlike 20R2.

[Rob]

If you're using 4k level graphics you may need to correct the scale and resolution. Not sure why one version works and another doesn't so suspect it's linked to the Windows settings. I have this to look forward to once I catch up with my new laptop: it's been sat in the office since about August

[Deepak_296]

Yes Rob. I also suspect the issue to be linked with some windows settings. But I am happy that I could fix it with the help of forum coordinators. So Thanks again. You guys are doing really great for us.