Issue on the design change when using the Ansys FLUENT adjoint-based shape optimizer
-
-
Brief introduction on the issue:
FLUENT’s shape optimizer doesn’t appear to be giving the correct direction for optimizing the case with an energy objective function, but works fine with a momentum based objective function.
Section 1: Model introduction
The model is a tunnel, with the liquid flowing through it as shown in the figure 1.
Boundary conditions:
Viewing 1 reply thread- The topic ‘Issue on the design change when using the Ansys FLUENT adjoint-based shape optimizer’ is closed to new replies.
-
You are navigating away from the AIS Discovery experience
