We’re updating our badges platform. Badge issuance is temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
AIM Tutorials

AIM Tutorials

  1. All Channels
  2. AIM Tutorials
  3. vibration

vibration

    • October 6, 2018 at 9:38 pm
      neso445
      Subscriber

      what are the input and output for vibration for ansys program

    • October 7, 2018 at 12:01 am
      peteroznewman
      Subscriber

      AIM vibration analysis is limited to Modal analysis.
      The inputs to the Modal analysis are: geometry, material, and support boundary conditions. No force or non-zero displacement is allowed in a Modal analysis. The outputs from a Modal analysis are a set of Mode Shapes and Modal Frequencies.

      If you use ANSYS Mechanical instead of AIM, then in addition to Modal Analysis there is Harmonic Response, Random Vibration, Response Spectrum and Transient Structural as well as Explicit Dynamics.

      What did you want to simulate?

    • November 12, 2019 at 7:34 am
      saifali
      Subscriber

      I want to analyze the wing of a plane .. I need some advice

    • November 12, 2019 at 11:33 pm
      peteroznewman
      Subscriber

      My advice is to post a New Discussion with as much detailed information as you can write and don't post it in the AIM Tutorials section.

Viewing 3 reply threads
  • The topic ‘vibration’ is closed to new replies.
Innovation Space
Top Contributors

© 2025 Copyright ANSYS, Inc. All rights reserved.

Ansys does not support the usage of unauthorized Ansys software. Please visit www.ansys.com to obtain an official distribution.