nThanks for your suggestion.nI will explain the steps followed:nI created the intersection curve between the two surfaces and fitted the spline as a single sketch. n
Then, created a plane to sweep the circular crosssection through the 3D spline sketch nThen, I converted the solid model to IGES format (as recommended by you).n
Then I imported in SpaceClaim geometry for beam extraction.nnBut, when I tried to extract beams, the operation failed. n
This is my core problem.nAnd I could not create that 3D sketch in Spaceclaim due to limitations in the software, like, there is no option for creating the intersection curve.nKindly give your suggestion.n
Then, created a plane to sweep the circular crosssection through the 3D spline sketch nThen, I converted the solid model to IGES format (as recommended by you).nThen I imported in SpaceClaim geometry for beam extraction.nnBut, when I tried to extract beams, the operation failed. nThis is my core problem.nAnd I could not create that 3D sketch in Spaceclaim due to limitations in the software, like, there is no option for creating the intersection curve.nKindly give your suggestion.n
You are navigating away from the AIS Discovery experience