Reply To: The accuracy of S-parameters of TM mode with HFSS

[yhoshino]

click update report in report context menu or update field plot during simulation to see the last pass results.If you set solution:AdaptivePass in report config, which means EVERY pass, it will plot every pass in the same figure.When the simulation in complete, HFSS should update every figure to the latest pass. But sometimes it forgets. So don't forget doing figure update yourself before reading the results./forum/discussion/comment/100479#Comment_100479

I set solution to AdaptivePass and I succeed to update and display the Pass - S-parameter plot.nI want to display the transmittance value in TM mode on the graph, but it seems that the value is different from what I expected. The value when Number of passes was set to 6 another time and the value at 6 this time are very different. nThe attached photo is the actual figure. The forecast is that the transmittance will be around -0.09dB and I cannot understand why the value changes so much.nCould you give me any other advise on what is this value displayed now and where to change the setting to see the transmittance ?.nn