0 of 10 Questions completed
Questions:
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
Congratulations you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
What factors affect the resultant field in a synchronous machine? (Select the 3 correct answers)
What is the torque angle in a synchronous machine?
What are the components of the complex power delivered by the source? (Select the 2 correct answers)
In a special case where the armature resistance can be neglected, what remains constant when a synchronous generator is connected to an infinite bus?
What is the generator mode of operation in a synchronous machine?
What is the motor mode of operation in a synchronous machine?
What is a salient pole synchronous machine?
What are the key components to draw the phasor diagram correctly in a salient pole synchronous machine? (Select the 2 correct answers)
Can a salient pole machine operate with zero field current?
What is the purpose of short circuit and open circuit tests on non-salient pole synchronous machines?