Course Assessment - Reviewing Results
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
Generally speaking, accurate simulation results takes two forms - _____ & _____. Select the two best options that complete the statement.
CorrectIncorrect -
Question 2 of 10
2. Question
Which of the following checks helps the user get an idea of the global equilibrium of the model? Select the best option.
CorrectIncorrect -
Question 3 of 10
3. Question
In Ansys Mechanical, linear or small deflection analysis assumes that the final deformed shape and the original geometry is _____. Select the best option that completes the statement.
CorrectIncorrect -
Question 4 of 10
4. Question
Consider the case where a linear (small deflection) analysis has just been performed. Plotting the deformed shape of the model with true scale shows that the deformations are very large, but the stress results are below the yield strength of the material. Which of the following is a correct follow-on statement? Select the best option.
CorrectIncorrect -
Question 5 of 10
5. Question
Failure of a ductile material depends on _____. Select the option that best completes the statement.
CorrectIncorrect -
Question 6 of 10
6. Question
What would be the Safety Margin for a part made of aluminum alloy (tensile yield strength = 280 MPa) at a point where the maximum equivalent stress is 140 MPa?
CorrectIncorrect -
Question 7 of 10
7. Question
Which of the following measures of stress has a cylindrical yield surface?
CorrectIncorrect -
Question 8 of 10
8. Question
A Design Point in Workbench is a collection of _____ parameters. Select the option that best completes the sentence.
CorrectIncorrect -
Question 9 of 10
9. Question
Parameter Chart provides the relationship between _____. Select the option that best completes the statement.
CorrectIncorrect -
Question 10 of 10
10. Question
The table of design points can be accessed within _____. Select the option that best completes the sentence.
CorrectIncorrect