Course Assessment — Parametric Analysis and Optimization
Quiz Summary
0 of 8 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 8 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 8
1. Question
The main motivation for conducting Process Integration and Design Optimization is:
-
Question 2 of 8
2. Question
The automation of the simulation process is essential to conduct design optimization. A simulation process may be ______.
-
Question 3 of 8
3. Question
To conduct Parametric Optimization, you need a simulation model and _____.
(Select all that apply)
-
Question 4 of 8
4. Question
In which industries can Process Integration and Design Optimization be applied:
-
Question 5 of 8
5. Question
A _______ consists of specific values for input parameters and the corresponding output parameters evaluated by a numerical solver in the simulation process.
-
Question 6 of 8
6. Question
Imagine you want to optimize your product: You need to conduct all steps of Sensitivity Analyses, Optimization, and Robustness evaluation and publish it as an App. True or False?
-
Question 7 of 8
7. Question
To understand which are the important input parameters of your simulation model, you conduct a _____.
-
Question 8 of 8
8. Question
To apply methods like Sensitivity Analyses, Optimization, or Robustness evaluation you always need an automated CAE Process.