Course Assessment — Geometry Prep for Fluids Simulation in Ansys Discovery
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
In Ansys Discovery, the 'seed face' for volume extraction is normally which type of a face?
-
Question 2 of 10
2. Question
If only internal faces are highlighted in red color while we ''Preview inside faces'' when extracting fluid volume it means?
-
Question 3 of 10
3. Question
Most features in Discovery can also be accessed by clicking on the small black hexagon, called the:
-
Question 4 of 10
4. Question
In Discovery, you can change location of the cross-section by enabling the "_____"
-
Question 5 of 10
5. Question
Select all that are required for extracting fluid volume. (Multiple Correct)
-
Question 6 of 10
6. Question
If we move the fluid bodies to new components will they update automatically?
-
Question 7 of 10
7. Question
How can you select the hidden surfaces, edges below?
-
Question 8 of 10
8. Question
In Ansys Discovery, which of the following option can be used to search through all bodies for similarities with selected face, body etc.?
-
Question 9 of 10
9. Question
Shared faces in fluid volume extract after share topology are highlighted in which color in review tool?
-
Question 10 of 10
10. Question
Combine tool can only be used to merge two objects together?