Quiz : Ansys Lumerical FDE — My First Simulation
Quiz Summary
0 of 8 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 8 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 8
1. Question
Select all the devices where we can use the FDE solver:
CorrectIncorrect -
Question 2 of 8
2. Question
You have calculated the modes propagating in a SOI waveguide. You now want to change the width of the waveguide. What should you do first?
CorrectIncorrect -
Question 3 of 8
3. Question
What results can be found in the mode list?
CorrectIncorrect -
Question 4 of 8
4. Question
Sort the following tasks in the order of the general workflow for FDE simulation.
-
Run
-
Calculate modes
-
Setup
-
Mesh
View Answers:
CorrectIncorrect -
-
Question 5 of 8
5. Question
In the list below, which types of devices can be simulated using the FDE solver?
CorrectIncorrect -
Question 6 of 8
6. Question
When doing a frequency sweep, what results are available in the ‘Frequency plot’ tab?
CorrectIncorrect -
Question 7 of 8
7. Question
Open file FDE_My_First_Sim_SOI_waveguide.lms. Calculate the modes at a wavelength of 1.55 um. What is the effective index of the fundamental TM mode? Use the polarization fraction.
Insert your answer as a number with three decimal places precision. For example, if the answer is 0.254912, type in 0.254.
CorrectIncorrect -
Question 8 of 8
8. Question
Open file FDE_My_First_Sim_SOI_waveguide_bent.lms. Calculate the fundamental TE mode at a wavelength of 1.55 um for a bent waveguide with a bend radius of 3 um. What is the loss (in dB/m)?
Insert your answer as a number with three decimal places precision. For example, if the answer is 0.254912, type in 0.254.
CorrectIncorrect