Quiz: Ansys Lumerical EME — Running Simulations and Analyzing Results
Please note that you only have 5 attempts to pass this Quiz.
Quiz Summary
0 of 12 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 12 Questions answered correctly
Your time:
Time has elapsed
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 12
1. Question
When you clicking 'run' in the main menu, the EME solver will calculate the modes in each cell.
-
Question 2 of 12
2. Question
What results are available in each cell?
-
Question 3 of 12
3. Question
In the EME analysis window, which of the following properties can be defined or modified?
-
Question 4 of 12
4. Question
User S matrix is the main result from the EME solver. What defines the dimension of the matrix?
-
Question 5 of 12
5. Question
When modifying the number of periods, you need to recalculate the modes.
-
Question 6 of 12
6. Question
The propagation sweep allows you to sweep over:
-
Question 7 of 12
7. Question
Which script command can be used to run a single Propagation?
-
Question 8 of 12
8. Question
Considering the following spot size converter where we use a taper to couple the light from an SOI waveguide to a larger SiON waveguide. The Propagation sweep tool can be used to sweep over:
-
Question 9 of 12
9. Question
In the previous spot size converter example, which cell group would you perform the propagation sweep on?
-
Question 10 of 12
10. Question
In the previous spot size converter example, which result from the EME solver region will give you the complex transmission coefficients?
-
Question 11 of 12
11. Question
Download and open the simulation file EME_Run_Analysis_Bragg_Exercise.lms. First, click “run” to find the modes.
In the EME analysis window, which cell groups represent a period of the grating?
-
Question 12 of 12
12. Question
In the previous Bragg grating example, set the number of periods to 100 and perform the second step, and click on Propagate.
What is the transmission of the device? Enter the result in % with no decimal points (for example, if the result is 53.23%, enter 53)