Course Assessment — Understanding Transformers and Electrical Machines
Quiz Summary
0 of 7 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 7 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 7
1. Question
What is the purpose of the Scott connection in phase conversion?
-
Question 2 of 7
2. Question
What happens if the secondary current is balanced in Scott connection?
-
Question 3 of 7
3. Question
What are the methods used for phase conversion in transformers? (Select the 3 correct answers)
-
Question 4 of 7
4. Question
What is the primary condition for parallel operation of transformers?
-
Question 5 of 7
5. Question
What is the optimal condition for load sharing in parallel operation of transformers?
-
Question 6 of 7
6. Question
What is the purpose of a tap changer in a transformer?
-
Question 7 of 7
7. Question
What influences the size of a transformer?