Course Assessment — Waveguide Simulation Using Ansys HFSS
Quiz Summary
0 of 15 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 15 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 15
1. Question
Which of the following waveguides has higher power capability?
CorrectIncorrect -
Question 2 of 15
2. Question
Which of the following solution types is suitable for analyzing the waveguides in Ansys HFSS?
CorrectIncorrect -
Question 3 of 15
3. Question
Which of the following option is used to customize the material in Ansys HFSS?
CorrectIncorrect -
Question 4 of 15
4. Question
Which of the following is the default material outside to the simulation model space?
CorrectIncorrect -
Question 5 of 15
5. Question
Identify the propagating mode of the rectangular waveguide by looking at the image below:
CorrectIncorrect -
Question 6 of 15
6. Question
Which of the following modes doesn't exist in a rectangular waveguide?
CorrectIncorrect -
Question 7 of 15
7. Question
What does 'm' represent in the notation $TE_{mn}$ for rectangular waveguide?
CorrectIncorrect -
Question 8 of 15
8. Question
Waveguide acts as a _____. Select the best option that completes the statement.
CorrectIncorrect -
Question 9 of 15
9. Question
Which of the following sets have the same cut off frequency in a rectangular waveguide?
CorrectIncorrect -
Question 10 of 15
10. Question
Which of the following plot helps to determine the cut off frequencies of a rectangular waveguide in Ansys HFSS?
CorrectIncorrect -
Question 11 of 15
11. Question
It is given that $TM_{11}$ mode is propagating in a rectangular waveguide. Which of the following modes that are propagating inside the waveguide along with $TM_{11}$?
CorrectIncorrect -
Question 12 of 15
12. Question
An air filled rectangular waveguide has cut off frequency of 2.4 GHz for dominant mode. Later it is filled with a dielectric material (relative permittivity 4 and relative permeability 1). What will be the new cut off frequency for dominant mode?
CorrectIncorrect -
Question 13 of 15
13. Question
What does 'm' represents in the notation $TE_{nm}$ for circular waveguide?
CorrectIncorrect -
Question 14 of 15
14. Question
Which one of the following modes is the dominant mode in a circular waveguide?
CorrectIncorrect -
Question 15 of 15
15. Question
What is the correct order for the first three modes of circular waveguide?
CorrectIncorrect