Simulation Exercise - Reviewing Results
Download the zip file and extract the contents. Go through the Instructions file. Follow along with the provided steps and solve the model. You can start the quiz after you have obtained a solution.
For performing the simulation, you can use the latest release of the academic, commercial or free student version of Ansys Mechanical. Download Ansys Student for free here.
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
For the present case, what is the maximum total deformation obtained under the given load? Select the option that is closest to the correct result.
CorrectIncorrect -
Question 2 of 10
2. Question
What is the maximum equivalent (von-Mises) stress value obtained in the present analysis? Select the option that is closest to the correct result.
CorrectIncorrect -
Question 3 of 10
3. Question
What is the dominant direction of reaction forces developed in the hole C? Select the best option.
CorrectIncorrect -
Question 4 of 10
4. Question
To replicate the same constraints in Hole C, which of the following boundary conditions/connections can be used? Select the best option.
CorrectIncorrect -
Question 5 of 10
5. Question
What is the minimum safety factor against tensile yield strength of the model using the Max Equivalent Stress theory? Select the option that is close to your answer.
CorrectIncorrect -
Question 6 of 10
6. Question
Which of the following statement is TRUE regarding the reaction moments formed in the hole D? Select the option that is closest to the correct result.
CorrectIncorrect -
Question 7 of 10
7. Question
In the below figure, what kind of stresses are developed in the locations P and Q? Select the best option.
CorrectIncorrect -
Question 8 of 10
8. Question
How much percentage of the total force is developed as reaction forces in hole C? Select the option that is close to your answer.
CorrectIncorrect -
Question 9 of 10
9. Question
Statement-I: All of the reaction forces are developed in only Hole A and Hole C.
Statement-II: No reaction forces are developed in Hole D since there are no constraints for the translational movement.
CorrectIncorrect -
Question 10 of 10
10. Question
In which direction do we have maximum deformation and why is that? Select the best option.
CorrectIncorrect