We have an exciting announcement about badges coming in May 2025. Until then, we will temporarily stop issuing new badges for course completions and certifications. However, all completions will be recorded and fulfilled after May 2025.

Ansys Innovation Space Taiwan

學生版免費軟體

不透過實驗如何得知18650電池在NTGK model所需U&Y係數

- March 26, 2025 at 5:04 am
  
  brukry5544
  Subscriber
  
  我是以標稱電容3ah與2.2ah，在2c放電倍率下進行模擬，但如下圖，我應該怎麼得到或是誰能夠提供U&Y係數內部的a0~a5 b0~b5 c1 c2值呢?謝謝!
- March 27, 2025 at 11:21 am
  
  Murari Iyengar
  Ansys Employee
  
  Hi, the information you are referring to is cell data. This should come from your cell manufacturer who can provide HPPC data that can be read into Fluent. Please see Building Better Batteries: Characterize Battery Parameters for Simulation for more information on HPPC data. You can also refer to our Battery Modeling course here: ANSYS Fluent: ECM Battery Model and Chapter 31: Simulating a Single Battery Cell Using the MSMD Battery Model

Viewing 1 reply thread

必須登入。