We’re putting the final touches on our new badges platform. Badge issuance remains temporarily paused, but all completions are being recorded and will be fulfilled once the platform is live. Thank you for your patience.
1）勾选Auto Delay之后软件会自动把眼图放在最中间，手动设置的Delay就不起作用了；一般想把Data和CLK放在一张图中时都不勾选该选项，在Source设置了Delay这里的Delay Value就不用设置；
2） Auto compute cross amplitude和 Auto compute eye measurement point都建议按照默认的勾选上：
· AutoComputeCrossAmplitude：勾选上软件会自动根据高低电平的平均值来计算测量眼图眼宽的幅度位置；
· AutoComputeEyeMeasurementPoint：勾选上软件会自动计算眼图测量眼高的上下边沿Cross的时间位置
You are navigating away from the AIS Discovery experience
Ansys Assistant
Welcome to Ansys Assistant!
An AI-based virtual assistant for active Ansys Academic Customers. Please login using your university issued email address.
Hey there, you are quite inquisitive! You have hit your hourly question limit. Please retry after '10' minutes. For questions, please reach out to ansyslearn@ansys.com.
RETRY