0 of 10 Questions completed
Questions:
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
True or False: HFSS requires that the periodicity of an array be located in the x-y plane.
True or False: The z-dimension of the single-element model airbox is chosen arbitrarily.
A dipole antenna that is exactly $\frac{\lambda}{2}$ long at $5GHz$ will resonate at a frequency that is which of the following?
To achieve an interelemental spacing of half a wavelength in the x-direction at 300 MHz, the x-dimension of the airbox should be:
What should the minimum distance be between the radiating element of a simulation and any radiation boundary?
True or False: Relative Coordinate Systems can be used to re-orient radiation plots as though the array were centered at the origin.
True or False: To see the effect of changing the relative magnitude or phase of the feed signal input to any element(s) of the array, one must edit the excitations and re-simulate the model.
How many Master/Slave boundary pairs are required to simulate a linear array, given that the single-element model is rectangular in the x-y plane?
How many Master/Slave boundary pairs are required to simulate a planar array, given that the single-element model is rectangular in the x-y plane?
True or False: the U and V vectors of a Master boundary should frame the edges of the face on which that boundary is assigned.