Simulation Exercise - Numerically Accurate Results
Download the zip file and extract the contents. Go through the Instructions file. Follow along with the provided steps and solve the model. You can start the quiz after you have obtained a solution.
For performing the simulation, you can use the latest release of the academic, commercial or free student version of Ansys Mechanical. Download Ansys Student for free here.
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
In the present case, what is the maximum Equivalent (von-Mises) Stress value obtained after getting a mesh-independent solution? Select the option that is closest to the correct result.
CorrectIncorrect -
Question 2 of 10
2. Question
In the present case, what is the maximum Total Deformation value obtained after getting a mesh independent solution? Select the option that is closest to the correct result.
CorrectIncorrect -
Question 3 of 10
3. Question
In the present case, when the results are scoped to the area between B and C from the figure below, what is the maximum nodal difference of the Equivalent (von-Mises) Stress value obtained after getting a mesh-independent solution? Select the range that encompasses the correct result.
CorrectIncorrect -
Question 4 of 10
4. Question
From the figure below, in which of the following location do we have the maximum Total Deformation? Select the best option.
CorrectIncorrect -
Question 5 of 10
5. Question
From the figure below, in which of the following locations do we have the maximum Equivalent (von-Mises) Stress? Select the best option.
CorrectIncorrect -
Question 6 of 10
6. Question
Statement I: As the mesh density increases, the nodal difference of the stress results decreases.
Statement II: As the mesh density increases, the averaged and unaveraged stress results should diverge.
CorrectIncorrect -
Question 7 of 10
7. Question
From the figure below, in which of the following location do we have the peak Maximum Principal Stress value? Select the best option.
CorrectIncorrect -
Question 8 of 10
8. Question
In which direction does the maximum Total Deformation occur under the current load? Select the best option.
CorrectIncorrect -
Question 9 of 10
9. Question
What is the total force reaction value for the two cylindrical supports in the X direction after obtaining the mesh-independent solution? Select the option that is closest to the correct result.
CorrectIncorrect -
Question 10 of 10
10. Question
What is the total force reaction value for the two cylindrical supports in the Y direction after obtaining the mesh-independent solution? Select the option that is closest to the correct result.
CorrectIncorrect