0 of 10 Questions completed
Questions:
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
What is the concept of volume fraction in micromechanics?
What are the assumptions made in the mechanics of material approach? Select the 2 best options.
What increases significantly with the addition of fibers in a matrix?
What are the limitations of the mechanics of material approach in predicting?
What factors influence the longitudinal Young's modulus? Select the 2 best options.
What does the Halpin-Tsai semi-empirical model provide?
What is more difficult to determine - strength properties or stiffness parameters of a unidirectional lamina?
What plays a crucial role in deciding the longitudinal tensile strength of a lamina?
What influences the transverse tensile strength of a lamina?
What are the possible failure modes under compression? Select the 3 best options.