Quiz - Multiport Network Analysis
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
Suppose that you wish to find $Y_{12}$ for a 4-port network. To perform this characterization, a test voltage should be applied at which of the four ports?
CorrectIncorrect -
Question 2 of 10
2. Question
The definition of Y-parameters requires that all non-driven ports be:
CorrectIncorrect -
Question 3 of 10
3. Question
Suppose you wish to find the admittance parameter $Y_{42}$ in a four-port network. For this measurement, what should appear at port 4?
CorrectIncorrect -
Question 4 of 10
4. Question
Suppose you wish to find the impedance parameter $Z_{24}$ in a four-port network. For this measurement, what should appear at port 3?
CorrectIncorrect -
Question 5 of 10
5. Question
Suppose you wish to find the scattering parameter $S_{23}$ in a four-port network. For this measurement, what should appear at port 1?
CorrectIncorrect -
Question 6 of 10
6. Question
To measure the $D$ parameter of the ABCD-matrix, port 2 must be:
CorrectIncorrect -
Question 7 of 10
7. Question
To "match terminate" a port means:
CorrectIncorrect -
Question 8 of 10
8. Question
The purpose of match terminating an output port is:
CorrectIncorrect -
Question 9 of 10
9. Question
The black box model of a system...
CorrectIncorrect -
Question 10 of 10
10. Question
A "port" is defined as:
CorrectIncorrect