Simulation Exercise - Intro to Modal-Based Methods
Download the zip file and extract the contents. Go through the Instructions file. Follow along with the provided steps and solve the model. You can start the quiz after you have obtained a solution.
For performing the simulation, you can use the latest release of the academic, commercial or free student version of Ansys Mechanical. Download Ansys Student for free here.
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
Which one among the following options is the correct one? Please select the best response.
CorrectIncorrect -
Question 2 of 10
2. Question
Which of the following is correct in regard to Harmonic MSUP analysis? Please select the best response.
CorrectIncorrect -
Question 3 of 10
3. Question
If fixed support is used instead of simply supported boundary condition at the center of the plate, then which of the following statements are correct? Please select the TWO best response without resolving the model.
CorrectIncorrect -
Question 4 of 10
4. Question
At how many frequency points do we have the data for frequency response when the Solution Intervals is set to 125 in the frequency range 0-250Hz. Please select the best response.
CorrectIncorrect -
Question 5 of 10
5. Question
What is the maximum frequency response for directional deformation in Z-direction at the vertex diametrically opposite to the vertex at which force is applied? Please select the best response.
CorrectIncorrect -
Question 6 of 10
6. Question
If the magnitude of the applied force is changed from 3N to 6N, then which of the following is correct? Please select the best response.
CorrectIncorrect -
Question 7 of 10
7. Question
What will happen if the damping ratio is increased to 1? Please select the best response without solving in Ansys Mechanical.
CorrectIncorrect -
Question 8 of 10
8. Question
In which direction is the frequency response for directional deformation at maximum? Please select the best response.
CorrectIncorrect -
Question 9 of 10
9. Question
. Which of the following statements are correct regarding this analysis? Please select the TWO best responses.
CorrectIncorrect -
Question 10 of 10
10. Question
Maximum frequency response for directional deformation in z-direction occurs at which frequency? Please select the TWO best responses.
CorrectIncorrect