Course Assessment — Deflection Theories and Beam Analysis
Quiz Summary
0 of 8 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 8 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 8
1. Question
What does the small deflection theory result in?
CorrectIncorrect -
Question 2 of 8
2. Question
What does the load deflection curve for large deflection theory show?
CorrectIncorrect -
Question 3 of 8
3. Question
What does Euler's theory provide a satisfactory design criteria for?
CorrectIncorrect -
Question 4 of 8
4. Question
What can be used to simulate the behavior of an imperfect system?
CorrectIncorrect -
Question 5 of 8
5. Question
What is the primary effect in a beam subjected to both axial and transverse loads?
CorrectIncorrect -
Question 6 of 8
6. Question
What happens to the resistance of a member to lateral deformation as the axial load approaches the critical load?
CorrectIncorrect -
Question 7 of 8
7. Question
What happens to the bending stiffness as the axial load increases?
CorrectIncorrect -
Question 8 of 8
8. Question
What method involves assuming a suitable shape function for the deformation of the system?
CorrectIncorrect