Course Assessment — Ansys HFSS Floquet Port
Quiz Summary
0 of 7 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 7 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 7
1. Question
Which of the following port types is used with planar periodic structure in Ansys HFSS?
CorrectIncorrect -
Question 2 of 7
2. Question
Which of the following port types support Mutiple modes of propagation in Ansys HFSS? (Select all the correct answers)
CorrectIncorrect -
Question 3 of 7
3. Question
Which of the following boundary conditions must be assigned to define the periodicity into the model geometry in Ansys HFSS?
CorrectIncorrect -
Question 4 of 7
4. Question
In which of the following analysis, a Floquet port is used in Ansys HFSS?
CorrectIncorrect -
Question 5 of 7
5. Question
Floquet port can only be aligned along _____ axis in Ansys HFSS. (Fill in the blanks with the most suitable answer)
CorrectIncorrect -
Question 6 of 7
6. Question
What happens to the gain of an antenna array, if the antenna array matrix of 2X2 is increased to 10X10?
CorrectIncorrect -
Question 7 of 7
7. Question
Which of the following results can be plotted when Floquet port is assigned as the excitation in Ansys HFSS?
CorrectIncorrect