Course assessment - Ansys Discovery Modeling Tools
Quiz Summary
0 of 10 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 10 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 10
1. Question
Which of the following tools in Ansys Discovery can be used to transform a surface body into a solid body? Select the best option
-
Question 2 of 10
2. Question
What does the Fulcrum option in the Move Tool do in Ansys Discovery? Select the best option
-
Question 3 of 10
3. Question
In Ansys Discovery, which of these options in the Pull Tool allows us to extrude a profile along a selected trajectory? Select the best option
-
Question 4 of 10
4. Question
Which of the following statements are TRUE about the Pull Tool in Ansys Discovery? Select the best two options
-
Question 5 of 10
5. Question
Which of the following options is NOT available under the Move Tool in Ansys Disovery? Select the best option
-
Question 6 of 10
6. Question
Which of the following options are TRUE about the Move Tool in Ansys Discovery? Select the best two options
-
Question 7 of 10
7. Question
What is the general use of the Fill Tool in Ansys Discovery? Select the best option
-
Question 8 of 10
8. Question
Which of the following statements are TRUE about the Fill Tool in Ansys Discovery? Select the best two options
-
Question 9 of 10
9. Question
With the _______ Tool, a straight line or a curve can be created between two vertices. Select the best option
-
Question 10 of 10
10. Question
Which of the following statements are TRUE about the Blend Tool in Ansys Discovery? Select the best two options