Quiz — Lumerical DGTD — My First Simulation
Quiz Summary
0 of 5 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 5 Questions answered correctly
Your time:
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 5
1. Question
In the DGTD workflow, when setting up a simulation, what is the first step?
CorrectIncorrect -
Question 2 of 5
2. Question
In the finite-element IDE, the toolstrip includes several tabs. In which one will you find the tools to add simulation objects such as mesh constraints, monitors or sources?
CorrectIncorrect -
Question 3 of 5
3. Question
The DGTD solver is using a finite element (unstructured) mesh that makes it ideal for applications such as Mie scattering.
CorrectIncorrect -
Question 4 of 5
4. Question
Download and open the simulation file, DGTD_Getting_Started_My_First_Simulation_Exercise.ldev.
What types of boundary conditions are used in this simulation?
Select all that apply
t types of boundary conditions are used in this simulation?
Select all that apply
CorrectIncorrect -
Question 5 of 5
5. Question
Set the monitor "T" so it is using the 2D rectangle object "T" from the geometry and run the simulation.
What is the maximum transmission?
Insert your answer in % as a number with no decimal places precision. For example, if the answer is 56.254912, type in 56.
CorrectIncorrect