Quiz — Stent Deployment
Please note that you only have 5 attempts to pass this Quiz.
Quiz Summary
0 of 20 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading...
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 20 Questions answered correctly
Your time:
Time has elapsed
Categories
- Not categorized 0%
-
Unfortunately, you did not pass the quiz.
Don't be discouraged - Go through the course material including the lecture videos, handout slides, and simulation examples to prepare and try again.
-
Congratulations, you have passed the quiz!
You still have room for improvement - Review the slides and simulation examples again to identify the concepts that you may have missed.
-
Congratulations, you have passed the quiz!
You scored better than average, but if you are still unsure about a particular topic, try starting a discussion on the Ansys Learning Forum to discuss your questions with peers around the world.
-
Congratulations, you have passed the quiz!
You did great - Check out other courses to further your knowledge. Also, visit the Ansys Learning Forum and participate in discussions on this subject to help your peers and deepen your own knowledge.
-
Congratulations you have passed the quiz!
You have excelled on this topic - Check out other courses and see if you can ace them too. Also, visit the Ansys Learning Forum to help your peers on this topic. With your knowledge, you can make a real difference.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 20
1. Question
Why should the vessel and plaque be included in the stent deployment?
-
Question 2 of 20
2. Question
Steps are used in the analysis because
-
Question 3 of 20
3. Question
Which of the following is a true statement regarding cyclic symmetry
-
Question 4 of 20
4. Question
Non-linear Stabilization is helpful for the following reasons :
-
Question 5 of 20
5. Question
Which is typically specified as the contact body
-
Question 6 of 20
6. Question
Which of the following statements is false regarding contact
-
Question 7 of 20
7. Question
Which of the following is false regarding parametric studies
-
Question 8 of 20
8. Question
What are the benefits of performing a fatigue analysis on the stent using simulation
-
Question 9 of 20
9. Question
For the strain-based constant life diagram introduced in this lesson, which of the following are not true
-
Question 10 of 20
10. Question
If a solution fails to solve completely, what should you do
-
Question 11 of 20
11. Question
A 3D Response Plot can be used to
-
Question 12 of 20
12. Question
How can the results file size be reduced
-
Question 13 of 20
13. Question
Setting the maximum number of substeps to a large number may be required
-
Question 14 of 20
14. Question
In the homework problem for Fatigue Evaluation of Deployed Stent, the maximum equivalent strain amplitude is
-
Question 15 of 20
15. Question
In the homework problem for Fatigue Evaluation of Deployed Stent, which of the following statements is false
-
Question 16 of 20
16. Question
In the homework problem for Best Practices, which statement best describes the reason for flipping contact scoping from stent surface to vessel wall
-
Question 17 of 20
17. Question
In the homework problem for Best Practices, using a nodal-projection based method of contact detection is recommend to
-
Question 18 of 20
18. Question
In the homework problem for Best Practices, which phrase best describes when to use Automatic Bisection with Contact
-
Question 19 of 20
19. Question
In the homework problem for Best Practices, mesh refinement of critical components is recommended
-
Question 20 of 20
20. Question
In the homework problem for Best Practices, the optimal combination of tools for achieving convergence is always a balance between