Theory Quiz

Platform Analysis — Theory Quiz

Once you have finished the exam, click on the 'Mark Complete' button to save your progress and move to the next section.

1 / 10

What are the additional advanced diffraction physics, SBR+ builds with?

All the options are correct

Uniform theory of diffraction

Creeping wave

Physical theory of diffraction

2 / 10

Which fields are considered when using the PO and GO approximations in SBR+?

Incident and transmitted

Reflected and transmitted

Incident, reflected and transmitted

Incident and reflected

3 / 10

Which rays are generated when an incident ray hits a penetrable surface in SBR+ solution type?

None of the options are correct

Transmitted and scattered rays

Reflected and transmitted rays

Reflected and scattered rays

4 / 10

Which one of the following solvers uses GTD or UTD methods to paint currents on platform body?

IE

All the options are correct

FE-BI

SBR+

5 / 10

What excitation is required to perform a HFSS SBR+ simulation?

Voltage

Wave port

Incident plane wave

Lumped port

6 / 10

Which solution type in the Ansys Electronics Desktop should be selected to analyze the scattering effect of large scale geometries

SBR+

Characteristic mode

Transient

Eigenmode

7 / 10

What is one way you can access the "Measure" command inside of Ansys Electronics Desktop?

Go to Draw tab > Measure

All the options are correct

Right mouse click on 3D Modeler window> Measure

Go to Modeler menu > Measure

8 / 10

What is one way you can thicken a sheet in Ansys Electronics Desktop?

Right mouse click on selected face > Edit > Surface > Thicken Sheet

Right mouse click on selected Face > Edit > Thicken Sheet

Right mouse click on selected Face > Arrange > Surface > Thicken Sheet

Right mouse click on selected Face > Edit > Boolean > Thicken Sheet

9 / 10

How can you setup the source fields for the SBR+ solver in Ansys Electronics Desktop?

Right mouse click on Excitations > Create Antenna Component > By File

Right mouse click on Solution Setup > Create Antenna Component > By File

Right mouse click on Results > Create Antenna Component > By File

Right mouse click on Field Overlays > Create Antenna Component > By File

10 / 10

What is one way you can create an object from a face of a geometry inside of Ansys Electronics Desktop?

Right mouse click on selected Face > Edit > Create Object From Face

Right mouse click on selected Face > Edit > Boolean > Create Object From Face

Right mouse click on selected Face > Arrange > Surface > Create Object From Face

Right mouse click on selected Face > Edit > Surface > Create Object From Face

Your score is

0%

Platform Analysis

Total time - 20 mins.

Total number of Questions - 10