{"id":169693,"date":"2023-05-15T08:32:39","date_gmt":"2023-05-15T08:32:39","guid":{"rendered":"\/knowledge\/forums\/topic\/in-additive-print-product-are-there-any-instructions-for-simulating-parts-attached-to-the-baseplate-with-minimum-support-heightzero\/"},"modified":"2023-07-31T12:33:09","modified_gmt":"2023-07-31T12:33:09","slug":"in-additive-print-product-are-there-any-instructions-for-simulating-parts-attached-to-the-baseplate-with-minimum-support-heightzero","status":"publish","type":"topic","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/in-additive-print-product-are-there-any-instructions-for-simulating-parts-attached-to-the-baseplate-with-minimum-support-heightzero\/","title":{"rendered":"In Additive Print Product, are there any instructions for simulating parts attached to the baseplate with minimum support height=zero?"},"content":{"rendered":"<p>When you simulate a part directly on the baseplate with minimum support height set to 0, there are variations in the assumptions at bottom of the part depending upon the outputs a user selects.  Varying combinations of &#8220;Simulate Part On Baseplate without Additional Supports&#8221; and &#8220;Displacement After Cutoff&#8221; settings result in different assumptions. The attached article describes the different assumption variations.<\/p>\n<p>Attachments:<br \/>\n1. <a href=https:\/\/ansys13.ansys.com\/KnowledgeArticles\/Phase-2B\/2053159\/Simulating%20parts%20with%20support%20for%20Additive%20Print.pdf>Simulating%20parts%20with%20support%20for%20Additive%20Print.pdf<\/a><\/p>\n","protected":false},"template":"","class_list":["post-169693","topic","type-topic","status-publish","hentry","topic-tag-additive-print","topic-tag-additive-manufacturing","topic-tag-structural-mechanics"],"aioseo_notices":[],"acf":[],"custom_fields":[{"0":{"_wp_page_template":["default"],"_bbp_last_active_time":["05-15-2023  20:20:01"],"_bbp_forum_id":["27789"],"_bbp_author_ip":["209.182.204.162"],"_btv_view_count":["275"],"siebel_km_number":["2053159"],"product_version":[""],"km_published_date":["2018-02-13T00:00:00.000Z"],"family":["Structural Mechanics"],"application_name":["Additive Print"]},"test":"solution"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/169693","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/169693\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/media?parent=169693"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}