{"id":167229,"date":"2023-04-05T14:33:12","date_gmt":"2023-04-05T14:33:12","guid":{"rendered":"\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/"},"modified":"2023-07-31T12:28:02","modified_gmt":"2023-07-31T12:28:02","slug":"i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ","status":"publish","type":"topic","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/","title":{"rendered":"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry.  I am getting the error:  &#8220;The mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.&#8221;  It seems that I should be able to create this type of mesh.  Is this a defect?  Will it be addressed?"},"content":{"rendered":"<p>ANSYS Meshing cannot yet handle this type of 2-way periodicity.  The limitation is due to the way Match Controls are implemented.   This is something we are working to rectify.  This capability should be accessible in R 19.x or R 20.<\/p>\n","protected":false},"template":"","class_list":["post-167229","topic","type-topic","status-publish","hentry","topic-tag-4391","topic-tag-cleanup-connections","topic-tag-fluid-dynamics","topic-tag-general","topic-tag-meshing","topic-tag-symmetry"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"ANSYS Meshing cannot yet handle this type of 2-way periodicity. The limitation is due to the way Match Controls are implemented. This is something we are working to rectify. This capability should be accessible in R 19.x or R 20.\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Knowledge | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry. I am getting the error: \u201cThe mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.\u201d It seems that I should be able to create this type of mesh. Is this a defect? Will it be addressed? | Ansys Knowledge\" \/>\n\t\t<meta property=\"og:description\" content=\"ANSYS Meshing cannot yet handle this type of 2-way periodicity. The limitation is due to the way Match Controls are implemented. This is something we are working to rectify. This capability should be accessible in R 19.x or R 20.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2023-04-05T14:33:12+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2023-07-31T12:28:02+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry. I am getting the error: \u201cThe mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.\u201d It seems that I should be able to create this type of mesh. Is this a defect? Will it be addressed? | Ansys Knowledge\" \/>\n\t\t<meta name=\"twitter:description\" content=\"ANSYS Meshing cannot yet handle this type of 2-way periodicity. The limitation is due to the way Match Controls are implemented. This is something we are working to rectify. This capability should be accessible in R 19.x or R 20.\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"position\":2,\"name\":\"Topics\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/meshing\\\/#listItem\",\"name\":\"meshing\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/meshing\\\/#listItem\",\"position\":3,\"name\":\"meshing\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/meshing\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\\\/#listItem\",\"name\":\"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry.  I am getting the error:  &#8220;The mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.&#8221;  It seems that I should be able to create this type of mesh.  Is this a defect?  Will it be addressed?\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\\\/#listItem\",\"position\":4,\"name\":\"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry.  I am getting the error:  &#8220;The mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.&#8221;  It seems that I should be able to create this type of mesh.  Is this a defect?  Will it be addressed?\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/meshing\\\/#listItem\",\"name\":\"meshing\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\\\/\",\"name\":\"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry. I am getting the error: \\u201cThe mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.\\u201d It seems that I should be able to create this type of mesh. Is this a defect? Will it be addressed? | Ansys Knowledge\",\"description\":\"ANSYS Meshing cannot yet handle this type of 2-way periodicity. The limitation is due to the way Match Controls are implemented. This is something we are working to rectify. This capability should be accessible in R 19.x or R 20.\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\\\/#breadcrumblist\"},\"datePublished\":\"2023-04-05T14:33:12+00:00\",\"dateModified\":\"2023-07-31T12:28:02+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry. I am getting the error: \u201cThe mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.\u201d It seems that I should be able to create this type of mesh. Is this a defect? Will it be addressed? | Ansys Knowledge","description":"ANSYS Meshing cannot yet handle this type of 2-way periodicity. The limitation is due to the way Match Controls are implemented. This is something we are working to rectify. This capability should be accessible in R 19.x or R 20.","canonical_url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/knowledge","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","position":2,"name":"Topics","item":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/meshing\/#listItem","name":"meshing"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/meshing\/#listItem","position":3,"name":"meshing","item":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/meshing\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/#listItem","name":"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry.  I am getting the error:  &#8220;The mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.&#8221;  It seems that I should be able to create this type of mesh.  Is this a defect?  Will it be addressed?"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/#listItem","position":4,"name":"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry.  I am getting the error:  &#8220;The mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.&#8221;  It seems that I should be able to create this type of mesh.  Is this a defect?  Will it be addressed?","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/meshing\/#listItem","name":"meshing"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization","name":"Ansys Knowledge","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/knowledge\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/#webpage","url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/","name":"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry. I am getting the error: \u201cThe mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.\u201d It seems that I should be able to create this type of mesh. Is this a defect? Will it be addressed? | Ansys Knowledge","description":"ANSYS Meshing cannot yet handle this type of 2-way periodicity. The limitation is due to the way Match Controls are implemented. This is something we are working to rectify. This capability should be accessible in R 19.x or R 20.","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/#breadcrumblist"},"datePublished":"2023-04-05T14:33:12+00:00","dateModified":"2023-07-31T12:28:02+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website","url":"https:\/\/innovationspace.ansys.com\/knowledge\/","name":"Ansys Knowledge","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Knowledge | Ansys Innovation Space","og:type":"article","og:title":"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry. I am getting the error: \u201cThe mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.\u201d It seems that I should be able to create this type of mesh. Is this a defect? Will it be addressed? | Ansys Knowledge","og:description":"ANSYS Meshing cannot yet handle this type of 2-way periodicity. The limitation is due to the way Match Controls are implemented. This is something we are working to rectify. This capability should be accessible in R 19.x or R 20.","og:url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/","article:published_time":"2023-04-05T14:33:12+00:00","article:modified_time":"2023-07-31T12:28:02+00:00","twitter:card":"summary_large_image","twitter:title":"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry. I am getting the error: \u201cThe mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.\u201d It seems that I should be able to create this type of mesh. Is this a defect? Will it be addressed? | Ansys Knowledge","twitter:description":"ANSYS Meshing cannot yet handle this type of 2-way periodicity. The limitation is due to the way Match Controls are implemented. This is something we are working to rectify. This capability should be accessible in R 19.x or R 20."},"aioseo_meta_data":{"post_id":"167229","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2025-10-17 23:39:56","updated":"2026-07-29 23:18:23","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/\" title=\"Topics\">Topics<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/meshing\/\" title=\"meshing\">meshing<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tI am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry.  I am getting the error:  \u201cThe mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.\u201d  It seems that I should be able to create this type of mesh.  Is this a defect?  Will it be addressed?\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/knowledge"},{"label":"Topics","link":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/"},{"label":"meshing","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/meshing\/"},{"label":"I am working in the V 19.0 ANSYS Mesher and have set up two Match Controls for my geometry.  I am getting the error:  &#8220;The mesh could not be generated because two faces adjacent to an edge have different match controls applied to them. To correct this, ensure that match control settings are the same for both adjacent faces.&#8221;  It seems that I should be able to create this type of mesh.  Is this a defect?  Will it be addressed?","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-am-working-in-the-v-19-0-ansys-mesher-and-have-set-up-two-match-controls-for-my-geometry-i-am-getting-the-error-the-mesh-could-not-be-generated-because-two-faces-adjacent-to-an-edge-have-differ\/"}],"acf":[],"custom_fields":[{"0":{"_wp_page_template":["default"],"_bbp_last_active_time":["5\/4\/2023 20:20"],"_bbp_forum_id":["27796"],"_bbp_author_ip":["209.182.204.162"],"_btv_view_count":["2482"],"siebel_km_number":["2054305"],"product_version":["19"],"km_published_date":["2018-04-24T00:00:00.000Z"],"family":["Fluid Dynamics"],"application_name":["Meshing"]},"test":"articlesansys-com"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/167229","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/167229\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/media?parent=167229"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}