{"id":165816,"date":"2023-03-17T09:01:19","date_gmt":"2023-03-17T09:01:19","guid":{"rendered":"\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/"},"modified":"2023-07-31T12:34:51","modified_gmt":"2023-07-31T12:34:51","slug":"i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf","status":"publish","type":"topic","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/","title":{"rendered":"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory"},"content":{"rendered":"<p>This is probably because you have not carried out one of the CFX-4.4 installation steps to set the software mount points. Two mount points need to set, one for \/tmp and one for \/bin. Select the option Tools > Reset Mount Table on the CFX-4 Launcher. Try CFX-Build again; it should now work. If it still does not work select the option Tools > Command Line from the CFX-4 Launcher  to open up a bash window. This may produce an error message that the \/tmp directory cannot be found. Ignore this and continue.  Type the command mount in the bash window. Check to see what \/tmp and \/bin are set to &#8211; the vaulues in the first column of the output from mount show what they have been set to.   Check what \/tmp is set to. If it is set to c:temp, make sure that this directory exists on your hard disk; if it does not, create it and then make sure that the TMP user variable was set to c:temp using Control Panel > System > Advanced > User Variables.   Check what \/bin is set to. It should be set the installation directory that you specified when you installed the Cygwin software from the installation CD. The default is c:cygnus. If \/bin is set incorrectly type  umount \/bin mount &#8216;c:cygnuscygwin-b20H-i586-cygwin32bin&#8217; \/bin  taking care to put the correct directory name in the second line. Now exit the bash window, ignoring any error messages that may appear. Try CFX-Build again. This time it should work fine.<\/p>\n","protected":false},"template":"","class_list":["post-165816","topic","type-topic","status-publish","hentry","topic-tag-4-4","topic-tag-cfx-solver","topic-tag-general","topic-tag-installation-licensing-systems","topic-tag-systems-installation"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"This is probably because you have not carried out one of the CFX-4.4 installation steps to set the software mount points. Two mount points need to set, one for \/tmp and one for \/bin. Select the option Tools &gt; Reset Mount Table on the CFX-4 Launcher. Try CFX-Build again; it should now work. If it\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Knowledge | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory | Ansys Knowledge\" \/>\n\t\t<meta property=\"og:description\" content=\"This is probably because you have not carried out one of the CFX-4.4 installation steps to set the software mount points. Two mount points need to set, one for \/tmp and one for \/bin. Select the option Tools &gt; Reset Mount Table on the CFX-4 Launcher. Try CFX-Build again; it should now work. If it\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2023-03-17T09:01:19+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2023-07-31T12:34:51+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory | Ansys Knowledge\" \/>\n\t\t<meta name=\"twitter:description\" content=\"This is probably because you have not carried out one of the CFX-4.4 installation steps to set the software mount points. Two mount points need to set, one for \/tmp and one for \/bin. Select the option Tools &gt; Reset Mount Table on the CFX-4 Launcher. Try CFX-Build again; it should now work. If it\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"position\":2,\"name\":\"Topics\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/cfx-solver\\\/#listItem\",\"name\":\"cfx-solver\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/cfx-solver\\\/#listItem\",\"position\":3,\"name\":\"cfx-solver\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/cfx-solver\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\\\/#listItem\",\"name\":\"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \\\/cygnus\\\/cygwin-b20\\\/H-i586-cygwin32\\\/bin\\\/bash.exe:\\\/c:\\\/CFX\\\/CFX-4.4\\\/bin\\\/runbuild4: no such file or directory\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\\\/#listItem\",\"position\":4,\"name\":\"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \\\/cygnus\\\/cygwin-b20\\\/H-i586-cygwin32\\\/bin\\\/bash.exe:\\\/c:\\\/CFX\\\/CFX-4.4\\\/bin\\\/runbuild4: no such file or directory\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/cfx-solver\\\/#listItem\",\"name\":\"cfx-solver\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\\\/\",\"name\":\"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \\\/cygnus\\\/cygwin-b20\\\/H-i586-cygwin32\\\/bin\\\/bash.exe:\\\/c:\\\/CFX\\\/CFX-4.4\\\/bin\\\/runbuild4: no such file or directory | Ansys Knowledge\",\"description\":\"This is probably because you have not carried out one of the CFX-4.4 installation steps to set the software mount points. Two mount points need to set, one for \\\/tmp and one for \\\/bin. Select the option Tools > Reset Mount Table on the CFX-4 Launcher. Try CFX-Build again; it should now work. If it\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\\\/#breadcrumblist\"},\"datePublished\":\"2023-03-17T09:01:19+00:00\",\"dateModified\":\"2023-07-31T12:34:51+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory | Ansys Knowledge","description":"This is probably because you have not carried out one of the CFX-4.4 installation steps to set the software mount points. Two mount points need to set, one for \/tmp and one for \/bin. Select the option Tools > Reset Mount Table on the CFX-4 Launcher. Try CFX-Build again; it should now work. If it","canonical_url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/knowledge","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","position":2,"name":"Topics","item":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/cfx-solver\/#listItem","name":"cfx-solver"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/cfx-solver\/#listItem","position":3,"name":"cfx-solver","item":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/cfx-solver\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/#listItem","name":"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/#listItem","position":4,"name":"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/cfx-solver\/#listItem","name":"cfx-solver"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization","name":"Ansys Knowledge","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/knowledge\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/#webpage","url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/","name":"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory | Ansys Knowledge","description":"This is probably because you have not carried out one of the CFX-4.4 installation steps to set the software mount points. Two mount points need to set, one for \/tmp and one for \/bin. Select the option Tools > Reset Mount Table on the CFX-4 Launcher. Try CFX-Build again; it should now work. If it","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/#breadcrumblist"},"datePublished":"2023-03-17T09:01:19+00:00","dateModified":"2023-07-31T12:34:51+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website","url":"https:\/\/innovationspace.ansys.com\/knowledge\/","name":"Ansys Knowledge","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Knowledge | Ansys Innovation Space","og:type":"article","og:title":"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory | Ansys Knowledge","og:description":"This is probably because you have not carried out one of the CFX-4.4 installation steps to set the software mount points. Two mount points need to set, one for \/tmp and one for \/bin. Select the option Tools &gt; Reset Mount Table on the CFX-4 Launcher. Try CFX-Build again; it should now work. If it","og:url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/","article:published_time":"2023-03-17T09:01:19+00:00","article:modified_time":"2023-07-31T12:34:51+00:00","twitter:card":"summary_large_image","twitter:title":"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory | Ansys Knowledge","twitter:description":"This is probably because you have not carried out one of the CFX-4.4 installation steps to set the software mount points. Two mount points need to set, one for \/tmp and one for \/bin. Select the option Tools &gt; Reset Mount Table on the CFX-4 Launcher. Try CFX-Build again; it should now work. If it"},"aioseo_meta_data":{"post_id":"165816","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2025-10-17 22:31:21","updated":"2026-07-29 18:41:03","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/\" title=\"Topics\">Topics<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/cfx-solver\/\" title=\"cfx-solver\">cfx-solver<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tI have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/knowledge"},{"label":"Topics","link":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/"},{"label":"cfx-solver","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/cfx-solver\/"},{"label":"I have installed CFX-4.4 on a PC with Windows 2000. I have also installed Exceed and Exceed 3D 8.0. When I start CFX-Build I get the message: \/cygnus\/cygwin-b20\/H-i586-cygwin32\/bin\/bash.exe:\/c:\/CFX\/CFX-4.4\/bin\/runbuild4: no such file or directory","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/i-have-installed-cfx-4-4-on-a-pc-with-windows-2000-i-have-also-installed-exceed-and-exceed-3d-8-0-when-i-start-cfx-build-i-get-the-message-cygnus-cygwin-b20-h-i586-cygwin32-bin-bash-exe-c-cfx-cf\/"}],"acf":[],"custom_fields":[{"0":{"_wp_page_template":["default"],"_bbp_last_active_time":["3\/15\/2023 20:20"],"_bbp_forum_id":["153867"],"_bbp_author_ip":["23.56.168.180"],"_btv_view_count":["370"],"siebel_km_number":["305701"],"product_version":["4.4"],"km_published_date":["2004-03-12T00:00:00.000Z"],"family":["Installation\/Licensing\/Systems"],"application_name":["CFX-Solver"]},"test":"articlesansys-com"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/165816","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/165816\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/media?parent=165816"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}