{"id":165471,"date":"2023-03-17T09:00:25","date_gmt":"2023-03-17T09:00:25","guid":{"rendered":"\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/"},"modified":"2023-07-31T12:31:19","modified_gmt":"2023-07-31T12:31:19","slug":"with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the","status":"publish","type":"topic","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/","title":{"rendered":"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states &#8220;No segment slope can be larger than the slope of the previous segment.&#8221; However, it appears to run without error. What is the reason for this note if the solver runs anyway?"},"content":{"rendered":"<p>An increasing KINH slope segment is generally not recommended as it might lead to negative volume fractions for the different KINH layers and if slope increase is large enough, it might not be physically realistic.  Hence, the doc note.     Starting at R2019-R2, a warning is issued:  &#8220;The TB,PLAS,,,KINH table for material # at temperature ## has a segment slope (***)  larger than the previous segment slope (**). &#8221;    Background:  The older formulation (TB,mkin) error trapped this and the solver would not proceed.   This trap was considered too restrictive as it did not accommodate minor &#8220;noise&#8221; in some user&#8217;s data that turned out to be tolerable.<\/p>\n","protected":false},"template":"","class_list":["post-165471","topic","type-topic","status-publish","hentry","topic-tag-2019-r1","topic-tag-materials","topic-tag-mechanical-apdl","topic-tag-plasticity","topic-tag-structural-mechanics"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"An increasing KINH slope segment is generally not recommended as it might lead to negative volume fractions for the different KINH layers and if slope increase is large enough, it might not be physically realistic. Hence, the doc note. Starting at R2019-R2, a warning is issued: &quot;The TB,PLAS,,,KINH table for material # at temperature ##\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Knowledge | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states \u201cNo segment slope can be larger than the slope of the previous segment.\u201d However, it appears to run without error. What is the reason for this note if the solver runs anyway? | Ansys Knowledge\" \/>\n\t\t<meta property=\"og:description\" content=\"An increasing KINH slope segment is generally not recommended as it might lead to negative volume fractions for the different KINH layers and if slope increase is large enough, it might not be physically realistic. Hence, the doc note. Starting at R2019-R2, a warning is issued: &quot;The TB,PLAS,,,KINH table for material # at temperature ##\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2023-03-17T09:00:25+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2023-07-31T12:31:19+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states \u201cNo segment slope can be larger than the slope of the previous segment.\u201d However, it appears to run without error. What is the reason for this note if the solver runs anyway? | Ansys Knowledge\" \/>\n\t\t<meta name=\"twitter:description\" content=\"An increasing KINH slope segment is generally not recommended as it might lead to negative volume fractions for the different KINH layers and if slope increase is large enough, it might not be physically realistic. Hence, the doc note. Starting at R2019-R2, a warning is issued: &quot;The TB,PLAS,,,KINH table for material # at temperature ##\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"position\":2,\"name\":\"Topics\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/structural-mechanics\\\/#listItem\",\"name\":\"structural-mechanics\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/structural-mechanics\\\/#listItem\",\"position\":3,\"name\":\"structural-mechanics\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/structural-mechanics\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\\\/#listItem\",\"name\":\"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states &#8220;No segment slope can be larger than the slope of the previous segment.&#8221; However, it appears to run without error. What is the reason for this note if the solver runs anyway?\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\\\/#listItem\",\"position\":4,\"name\":\"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states &#8220;No segment slope can be larger than the slope of the previous segment.&#8221; However, it appears to run without error. What is the reason for this note if the solver runs anyway?\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/structural-mechanics\\\/#listItem\",\"name\":\"structural-mechanics\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\\\/\",\"name\":\"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states \\u201cNo segment slope can be larger than the slope of the previous segment.\\u201d However, it appears to run without error. What is the reason for this note if the solver runs anyway? | Ansys Knowledge\",\"description\":\"An increasing KINH slope segment is generally not recommended as it might lead to negative volume fractions for the different KINH layers and if slope increase is large enough, it might not be physically realistic. Hence, the doc note. Starting at R2019-R2, a warning is issued: \\\"The TB,PLAS,,,KINH table for material # at temperature ##\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\\\/#breadcrumblist\"},\"datePublished\":\"2023-03-17T09:00:25+00:00\",\"dateModified\":\"2023-07-31T12:31:19+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states \u201cNo segment slope can be larger than the slope of the previous segment.\u201d However, it appears to run without error. What is the reason for this note if the solver runs anyway? | Ansys Knowledge","description":"An increasing KINH slope segment is generally not recommended as it might lead to negative volume fractions for the different KINH layers and if slope increase is large enough, it might not be physically realistic. Hence, the doc note. Starting at R2019-R2, a warning is issued: \"The TB,PLAS,,,KINH table for material # at temperature ##","canonical_url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/knowledge","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","position":2,"name":"Topics","item":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/#listItem","name":"structural-mechanics"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/#listItem","position":3,"name":"structural-mechanics","item":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/#listItem","name":"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states &#8220;No segment slope can be larger than the slope of the previous segment.&#8221; However, it appears to run without error. What is the reason for this note if the solver runs anyway?"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/#listItem","position":4,"name":"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states &#8220;No segment slope can be larger than the slope of the previous segment.&#8221; However, it appears to run without error. What is the reason for this note if the solver runs anyway?","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/#listItem","name":"structural-mechanics"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization","name":"Ansys Knowledge","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/knowledge\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/#webpage","url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/","name":"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states \u201cNo segment slope can be larger than the slope of the previous segment.\u201d However, it appears to run without error. What is the reason for this note if the solver runs anyway? | Ansys Knowledge","description":"An increasing KINH slope segment is generally not recommended as it might lead to negative volume fractions for the different KINH layers and if slope increase is large enough, it might not be physically realistic. Hence, the doc note. Starting at R2019-R2, a warning is issued: \"The TB,PLAS,,,KINH table for material # at temperature ##","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/#breadcrumblist"},"datePublished":"2023-03-17T09:00:25+00:00","dateModified":"2023-07-31T12:31:19+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website","url":"https:\/\/innovationspace.ansys.com\/knowledge\/","name":"Ansys Knowledge","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Knowledge | Ansys Innovation Space","og:type":"article","og:title":"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states \u201cNo segment slope can be larger than the slope of the previous segment.\u201d However, it appears to run without error. What is the reason for this note if the solver runs anyway? | Ansys Knowledge","og:description":"An increasing KINH slope segment is generally not recommended as it might lead to negative volume fractions for the different KINH layers and if slope increase is large enough, it might not be physically realistic. Hence, the doc note. Starting at R2019-R2, a warning is issued: &quot;The TB,PLAS,,,KINH table for material # at temperature ##","og:url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/","article:published_time":"2023-03-17T09:00:25+00:00","article:modified_time":"2023-07-31T12:31:19+00:00","twitter:card":"summary_large_image","twitter:title":"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states \u201cNo segment slope can be larger than the slope of the previous segment.\u201d However, it appears to run without error. What is the reason for this note if the solver runs anyway? | Ansys Knowledge","twitter:description":"An increasing KINH slope segment is generally not recommended as it might lead to negative volume fractions for the different KINH layers and if slope increase is large enough, it might not be physically realistic. Hence, the doc note. Starting at R2019-R2, a warning is issued: &quot;The TB,PLAS,,,KINH table for material # at temperature ##"},"aioseo_meta_data":{"post_id":"165471","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2025-10-17 22:13:22","updated":"2026-07-29 17:02:37","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/\" title=\"Topics\">Topics<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/\" title=\"structural-mechanics\">structural-mechanics<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tWith regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states \u201cNo segment slope can be larger than the slope of the previous segment.\u201d However, it appears to run without error. What is the reason for this note if the solver runs anyway?\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/knowledge"},{"label":"Topics","link":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/"},{"label":"structural-mechanics","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/"},{"label":"With regards to Multilinear Kinematic Hardening, Section 4.4.3.2.2 states &#8220;No segment slope can be larger than the slope of the previous segment.&#8221; However, it appears to run without error. What is the reason for this note if the solver runs anyway?","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/with-regards-to-multilinear-kinematic-hardening-section-4-4-3-2-2-states-no-segment-slope-can-be-larger-than-the-slope-of-the-previous-segment-however-it-appears-to-run-without-error-what-is-the\/"}],"acf":[],"custom_fields":[{"0":{"_wp_page_template":["default"],"_bbp_last_active_time":["3\/15\/2023 20:20"],"_bbp_forum_id":["27814"],"_bbp_author_ip":["23.56.168.180"],"_btv_view_count":["967"],"siebel_km_number":["2060323"],"product_version":["2019 R1"],"km_published_date":["2019-08-09T00:00:00.000Z"],"family":["Structural Mechanics"],"application_name":["Mechanical APDL"]},"test":"articlesansys-com"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/165471","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/165471\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/media?parent=165471"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}