{"id":165349,"date":"2023-03-17T09:00:03","date_gmt":"2023-03-17T09:00:03","guid":{"rendered":"\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/"},"modified":"2023-07-31T12:31:05","modified_gmt":"2023-07-31T12:31:05","slug":"when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it","status":"publish","type":"topic","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/","title":{"rendered":"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds.  Is there a reason for that?"},"content":{"rendered":"<p>Actually there are nothing wrong with model setup. It is true that at some cycles, the program is running slow because it needs to update all contact pairs. Since automatic contact algorithm is used, program needs to check the contacts from time to time to make sure new contacts are added to computation and the obsolete contacts are removed from computation, due to material deformation and motion. This contact updates are done at strategic time steps, rather than every time step,  so model could  run more efficiently.<\/p>\n","protected":false},"template":"","class_list":["post-165349","topic","type-topic","status-publish","hentry","topic-tag-2019-r1","topic-tag-explicit-autodyn","topic-tag-mechanical","topic-tag-solution-problems","topic-tag-structural-mechanics"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"Actually there are nothing wrong with model setup. It is true that at some cycles, the program is running slow because it needs to update all contact pairs. Since automatic contact algorithm is used, program needs to check the contacts from time to time to make sure new contacts are added to computation and the\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Knowledge | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds. Is there a reason for that? | Ansys Knowledge\" \/>\n\t\t<meta property=\"og:description\" content=\"Actually there are nothing wrong with model setup. It is true that at some cycles, the program is running slow because it needs to update all contact pairs. Since automatic contact algorithm is used, program needs to check the contacts from time to time to make sure new contacts are added to computation and the\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2023-03-17T09:00:03+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2023-07-31T12:31:05+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds. Is there a reason for that? | Ansys Knowledge\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Actually there are nothing wrong with model setup. It is true that at some cycles, the program is running slow because it needs to update all contact pairs. Since automatic contact algorithm is used, program needs to check the contacts from time to time to make sure new contacts are added to computation and the\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"position\":2,\"name\":\"Topics\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/structural-mechanics\\\/#listItem\",\"name\":\"structural-mechanics\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/structural-mechanics\\\/#listItem\",\"position\":3,\"name\":\"structural-mechanics\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/structural-mechanics\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\\\/#listItem\",\"name\":\"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds.  Is there a reason for that?\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\\\/#listItem\",\"position\":4,\"name\":\"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds.  Is there a reason for that?\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/structural-mechanics\\\/#listItem\",\"name\":\"structural-mechanics\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\\\/\",\"name\":\"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds. Is there a reason for that? | Ansys Knowledge\",\"description\":\"Actually there are nothing wrong with model setup. It is true that at some cycles, the program is running slow because it needs to update all contact pairs. Since automatic contact algorithm is used, program needs to check the contacts from time to time to make sure new contacts are added to computation and the\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\\\/#breadcrumblist\"},\"datePublished\":\"2023-03-17T09:00:03+00:00\",\"dateModified\":\"2023-07-31T12:31:05+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds. Is there a reason for that? | Ansys Knowledge","description":"Actually there are nothing wrong with model setup. It is true that at some cycles, the program is running slow because it needs to update all contact pairs. Since automatic contact algorithm is used, program needs to check the contacts from time to time to make sure new contacts are added to computation and the","canonical_url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/knowledge","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","position":2,"name":"Topics","item":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/#listItem","name":"structural-mechanics"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/#listItem","position":3,"name":"structural-mechanics","item":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/#listItem","name":"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds.  Is there a reason for that?"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/#listItem","position":4,"name":"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds.  Is there a reason for that?","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/#listItem","name":"structural-mechanics"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization","name":"Ansys Knowledge","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/knowledge\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/#webpage","url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/","name":"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds. Is there a reason for that? | Ansys Knowledge","description":"Actually there are nothing wrong with model setup. It is true that at some cycles, the program is running slow because it needs to update all contact pairs. Since automatic contact algorithm is used, program needs to check the contacts from time to time to make sure new contacts are added to computation and the","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/#breadcrumblist"},"datePublished":"2023-03-17T09:00:03+00:00","dateModified":"2023-07-31T12:31:05+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website","url":"https:\/\/innovationspace.ansys.com\/knowledge\/","name":"Ansys Knowledge","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Knowledge | Ansys Innovation Space","og:type":"article","og:title":"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds. Is there a reason for that? | Ansys Knowledge","og:description":"Actually there are nothing wrong with model setup. It is true that at some cycles, the program is running slow because it needs to update all contact pairs. Since automatic contact algorithm is used, program needs to check the contacts from time to time to make sure new contacts are added to computation and the","og:url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/","article:published_time":"2023-03-17T09:00:03+00:00","article:modified_time":"2023-07-31T12:31:05+00:00","twitter:card":"summary_large_image","twitter:title":"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds. Is there a reason for that? | Ansys Knowledge","twitter:description":"Actually there are nothing wrong with model setup. It is true that at some cycles, the program is running slow because it needs to update all contact pairs. Since automatic contact algorithm is used, program needs to check the contacts from time to time to make sure new contacts are added to computation and the"},"aioseo_meta_data":{"post_id":"165349","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2025-10-17 22:07:01","updated":"2026-07-29 16:39:15","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/\" title=\"Topics\">Topics<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/\" title=\"structural-mechanics\">structural-mechanics<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tWhen solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds.  Is there a reason for that?\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/knowledge"},{"label":"Topics","link":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/"},{"label":"structural-mechanics","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/structural-mechanics\/"},{"label":"When solver output shows the step information, I found the time delay at each time step is different. For example, first few time steps take 2 second. Then the next time step takes 5 seconds before it goes back to normal 2 seconds.  Is there a reason for that?","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/when-solver-output-shows-the-step-information-i-found-the-time-delay-at-each-time-step-is-different-for-example-first-few-time-steps-take-2-second-then-the-next-time-step-takes-5-seconds-before-it\/"}],"acf":[],"custom_fields":[{"0":{"_wp_page_template":["default"],"_bbp_last_active_time":["3\/15\/2023 20:20"],"_bbp_forum_id":["27789"],"_bbp_author_ip":["23.56.168.180"],"_btv_view_count":["966"],"siebel_km_number":["2058107"],"product_version":["2019 R1"],"km_published_date":["2019-01-30T00:00:00.000Z"],"family":["Structural Mechanics"],"application_name":["Mechanical"]},"test":"articlesansys-com"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/165349","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/165349\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/media?parent=165349"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}