{"id":162437,"date":"2023-01-31T08:53:49","date_gmt":"2023-01-31T08:53:49","guid":{"rendered":"\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/"},"modified":"2023-07-31T12:36:53","modified_gmt":"2023-07-31T12:36:53","slug":"warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o","status":"publish","type":"topic","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/","title":{"rendered":"&#8212;- Warning&#8212; Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment &#8212;- Warning&#8212; To separate out zones, Edit the task and in Advanced Options, set &#8216;Invoke Zone Separation by Angle?&#8217; to &#8216;yes&#8217;"},"content":{"rendered":"<p>Workflow\u3067\u30e1\u30c3\u30b7\u30e5\u3092\u4f5c\u6210\u3059\u308b\u969b\u306b\u4e0b\u8a18warrning\u304c\u51fa\u308b\u5834\u5408\u304c\u3054\u3056\u3044\u307e\u3059\u3002 &#8212;- Warning&#8212; Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment &#8212;- Warning&#8212; To separate out zones, Edit the task and in Advanced Options, set &#8216;Invoke Zone Separation by Angle?&#8217; to &#8216;yes&#8217;  Fluent Meshing\u306f\u81ea\u52d5\u7684\u306b\u89d2\u5ea6\uff08\u9762\u30e1\u30c3\u30b7\u30e5\u9593\u306e\u89d2\u5ea6\uff09\u3092\u57fa\u6e96\u306b\u9762\u30be\u30fc\u30f3\u3092\u5206\u96e2\u3057\u3088\u3046\u3068\u3057\u307e\u3059\u304c\u305d\u308c\u304c\u5b9f\u884c\u3055\u308c\u306a\u304b\u3063\u305f\u3068\u3044\u3046\u5185\u5bb9\u3067\u3059\u3002 \u5f62\u72b6\u3084\u3067\u304d\u305f\u30e1\u30c3\u30b7\u30e5\u304c\u554f\u984c\u306a\u3051\u308c\u3070\u305d\u306e\u307e\u307e\u3067\u3082\u7d50\u69cb\u3067\u3059\u304c\u554f\u984c\u304c\u3042\u308b\u5834\u5408\u306fGenerate the Surface Mesh\u306eAdvanced Options\u3067\u5bfe\u5fdc\u53ef\u80fd\u3067\u3059\u3002 \u30c7\u30d5\u30a9\u30eb\u30c8\u306fauto\u3067\u3059\u306e\u3067\u5206\u5272\u3092\u3057\u306a\u3044\u306e\u3067\u3042\u308c\u3070Invoke Zone Separation by angle\u3092No\u3001\u5206\u5272\u3059\u308b\u306e\u3067\u3042\u308c\u3070yes+Separation Angle\u306e\u8abf\u6574\u3067\u5bfe\u5fdc\u304c\u8003\u3048\u3089\u308c\u307e\u3059\u3002  \u4e0a\u8a18\u7b49\u3067\u4e0d\u660e\u306a\u52d5\u4f5c\u3084\u4f5c\u6210\u3055\u308c\u305f\u5f62\u72b6\u306b\u3064\u3044\u3066\u7591\u554f\u304c\u3042\u308b\u5834\u5408\u306f\u30b5\u30dd\u30fc\u30c8\u307e\u3067\u3054\u9023\u7d61\u304f\u3060\u3055\u3044\u3002<\/p>\n","protected":false},"template":"","class_list":["post-162437","topic","type-topic","status-publish","hentry","topic-tag-2022-r1","topic-tag-fluent-meshing-tgrid","topic-tag-watertight","topic-tag-workflows"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"Workflow\u3067\u30e1\u30c3\u30b7\u30e5\u3092\u4f5c\u6210\u3059\u308b\u969b\u306b\u4e0b\u8a18warrning\u304c\u51fa\u308b\u5834\u5408\u304c\u3054\u3056\u3044\u307e\u3059\u3002 ---- Warning--- Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment ---- Warning--- To separate out zones, Edit the task and in Advanced Options, set &#039;Invoke Zone Separation by Angle?&#039; to &#039;yes&#039; Fluent Meshing\u306f\u81ea\u52d5\u7684\u306b\u89d2\u5ea6\uff08\u9762\u30e1\u30c3\u30b7\u30e5\u9593\u306e\u89d2\u5ea6\uff09\u3092\u57fa\u6e96\u306b\u9762\u30be\u30fc\u30f3\u3092\u5206\u96e2\u3057\u3088\u3046\u3068\u3057\u307e\u3059\u304c\u305d\u308c\u304c\u5b9f\u884c\u3055\u308c\u306a\u304b\u3063\u305f\u3068\u3044\u3046\u5185\u5bb9\u3067\u3059\u3002 \u5f62\u72b6\u3084\u3067\u304d\u305f\u30e1\u30c3\u30b7\u30e5\u304c\u554f\u984c\u306a\u3051\u308c\u3070\u305d\u306e\u307e\u307e\u3067\u3082\u7d50\u69cb\u3067\u3059\u304c\u554f\u984c\u304c\u3042\u308b\u5834\u5408\u306fGenerate the Surface Mesh\u306eAdvanced Options\u3067\u5bfe\u5fdc\u53ef\u80fd\u3067\u3059\u3002 \u30c7\u30d5\u30a9\u30eb\u30c8\u306fauto\u3067\u3059\u306e\u3067\u5206\u5272\u3092\u3057\u306a\u3044\u306e\u3067\u3042\u308c\u3070Invoke Zone Separation by angle\u3092No\u3001\u5206\u5272\u3059\u308b\u306e\u3067\u3042\u308c\u3070yes+Separation\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Knowledge | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"\u2014- Warning\u2014 Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment \u2014- Warning\u2014 To separate out zones, Edit the task and in Advanced Options, set \u2018Invoke Zone Separation by Angle?\u2019 to \u2018yes\u2019 | Ansys Knowledge\" \/>\n\t\t<meta property=\"og:description\" content=\"Workflow\u3067\u30e1\u30c3\u30b7\u30e5\u3092\u4f5c\u6210\u3059\u308b\u969b\u306b\u4e0b\u8a18warrning\u304c\u51fa\u308b\u5834\u5408\u304c\u3054\u3056\u3044\u307e\u3059\u3002 ---- Warning--- Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment ---- Warning--- To separate out zones, Edit the task and in Advanced Options, set &#039;Invoke Zone Separation by Angle?&#039; to &#039;yes&#039; Fluent Meshing\u306f\u81ea\u52d5\u7684\u306b\u89d2\u5ea6\uff08\u9762\u30e1\u30c3\u30b7\u30e5\u9593\u306e\u89d2\u5ea6\uff09\u3092\u57fa\u6e96\u306b\u9762\u30be\u30fc\u30f3\u3092\u5206\u96e2\u3057\u3088\u3046\u3068\u3057\u307e\u3059\u304c\u305d\u308c\u304c\u5b9f\u884c\u3055\u308c\u306a\u304b\u3063\u305f\u3068\u3044\u3046\u5185\u5bb9\u3067\u3059\u3002 \u5f62\u72b6\u3084\u3067\u304d\u305f\u30e1\u30c3\u30b7\u30e5\u304c\u554f\u984c\u306a\u3051\u308c\u3070\u305d\u306e\u307e\u307e\u3067\u3082\u7d50\u69cb\u3067\u3059\u304c\u554f\u984c\u304c\u3042\u308b\u5834\u5408\u306fGenerate the Surface Mesh\u306eAdvanced Options\u3067\u5bfe\u5fdc\u53ef\u80fd\u3067\u3059\u3002 \u30c7\u30d5\u30a9\u30eb\u30c8\u306fauto\u3067\u3059\u306e\u3067\u5206\u5272\u3092\u3057\u306a\u3044\u306e\u3067\u3042\u308c\u3070Invoke Zone Separation by angle\u3092No\u3001\u5206\u5272\u3059\u308b\u306e\u3067\u3042\u308c\u3070yes+Separation\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2023-01-31T08:53:49+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2023-07-31T12:36:53+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"\u2014- Warning\u2014 Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment \u2014- Warning\u2014 To separate out zones, Edit the task and in Advanced Options, set \u2018Invoke Zone Separation by Angle?\u2019 to \u2018yes\u2019 | Ansys Knowledge\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Workflow\u3067\u30e1\u30c3\u30b7\u30e5\u3092\u4f5c\u6210\u3059\u308b\u969b\u306b\u4e0b\u8a18warrning\u304c\u51fa\u308b\u5834\u5408\u304c\u3054\u3056\u3044\u307e\u3059\u3002 ---- Warning--- Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment ---- Warning--- To separate out zones, Edit the task and in Advanced Options, set &#039;Invoke Zone Separation by Angle?&#039; to &#039;yes&#039; Fluent Meshing\u306f\u81ea\u52d5\u7684\u306b\u89d2\u5ea6\uff08\u9762\u30e1\u30c3\u30b7\u30e5\u9593\u306e\u89d2\u5ea6\uff09\u3092\u57fa\u6e96\u306b\u9762\u30be\u30fc\u30f3\u3092\u5206\u96e2\u3057\u3088\u3046\u3068\u3057\u307e\u3059\u304c\u305d\u308c\u304c\u5b9f\u884c\u3055\u308c\u306a\u304b\u3063\u305f\u3068\u3044\u3046\u5185\u5bb9\u3067\u3059\u3002 \u5f62\u72b6\u3084\u3067\u304d\u305f\u30e1\u30c3\u30b7\u30e5\u304c\u554f\u984c\u306a\u3051\u308c\u3070\u305d\u306e\u307e\u307e\u3067\u3082\u7d50\u69cb\u3067\u3059\u304c\u554f\u984c\u304c\u3042\u308b\u5834\u5408\u306fGenerate the Surface Mesh\u306eAdvanced Options\u3067\u5bfe\u5fdc\u53ef\u80fd\u3067\u3059\u3002 \u30c7\u30d5\u30a9\u30eb\u30c8\u306fauto\u3067\u3059\u306e\u3067\u5206\u5272\u3092\u3057\u306a\u3044\u306e\u3067\u3042\u308c\u3070Invoke Zone Separation by angle\u3092No\u3001\u5206\u5272\u3059\u308b\u306e\u3067\u3042\u308c\u3070yes+Separation\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"position\":2,\"name\":\"Topics\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/watertight\\\/?template=japan#listItem\",\"name\":\"Watertight\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/watertight\\\/?template=japan#listItem\",\"position\":3,\"name\":\"Watertight\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/watertight\\\/?template=japan\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\\\/#listItem\",\"name\":\"&#8212;- Warning&#8212; Due to the size of the model, faces of bodies were not automatically separated for capping and\\\/or size assignment &#8212;- Warning&#8212; To separate out zones, Edit the task and in Advanced Options, set &#8216;Invoke Zone Separation by Angle?&#8217; to &#8216;yes&#8217;\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\\\/#listItem\",\"position\":4,\"name\":\"&#8212;- Warning&#8212; Due to the size of the model, faces of bodies were not automatically separated for capping and\\\/or size assignment &#8212;- Warning&#8212; To separate out zones, Edit the task and in Advanced Options, set &#8216;Invoke Zone Separation by Angle?&#8217; to &#8216;yes&#8217;\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/watertight\\\/?template=japan#listItem\",\"name\":\"Watertight\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\\\/\",\"name\":\"\\u2014- Warning\\u2014 Due to the size of the model, faces of bodies were not automatically separated for capping and\\\/or size assignment \\u2014- Warning\\u2014 To separate out zones, Edit the task and in Advanced Options, set \\u2018Invoke Zone Separation by Angle?\\u2019 to \\u2018yes\\u2019 | Ansys Knowledge\",\"description\":\"Workflow\\u3067\\u30e1\\u30c3\\u30b7\\u30e5\\u3092\\u4f5c\\u6210\\u3059\\u308b\\u969b\\u306b\\u4e0b\\u8a18warrning\\u304c\\u51fa\\u308b\\u5834\\u5408\\u304c\\u3054\\u3056\\u3044\\u307e\\u3059\\u3002 ---- Warning--- Due to the size of the model, faces of bodies were not automatically separated for capping and\\\/or size assignment ---- Warning--- To separate out zones, Edit the task and in Advanced Options, set 'Invoke Zone Separation by Angle?' to 'yes' Fluent Meshing\\u306f\\u81ea\\u52d5\\u7684\\u306b\\u89d2\\u5ea6\\uff08\\u9762\\u30e1\\u30c3\\u30b7\\u30e5\\u9593\\u306e\\u89d2\\u5ea6\\uff09\\u3092\\u57fa\\u6e96\\u306b\\u9762\\u30be\\u30fc\\u30f3\\u3092\\u5206\\u96e2\\u3057\\u3088\\u3046\\u3068\\u3057\\u307e\\u3059\\u304c\\u305d\\u308c\\u304c\\u5b9f\\u884c\\u3055\\u308c\\u306a\\u304b\\u3063\\u305f\\u3068\\u3044\\u3046\\u5185\\u5bb9\\u3067\\u3059\\u3002 \\u5f62\\u72b6\\u3084\\u3067\\u304d\\u305f\\u30e1\\u30c3\\u30b7\\u30e5\\u304c\\u554f\\u984c\\u306a\\u3051\\u308c\\u3070\\u305d\\u306e\\u307e\\u307e\\u3067\\u3082\\u7d50\\u69cb\\u3067\\u3059\\u304c\\u554f\\u984c\\u304c\\u3042\\u308b\\u5834\\u5408\\u306fGenerate the Surface Mesh\\u306eAdvanced Options\\u3067\\u5bfe\\u5fdc\\u53ef\\u80fd\\u3067\\u3059\\u3002 \\u30c7\\u30d5\\u30a9\\u30eb\\u30c8\\u306fauto\\u3067\\u3059\\u306e\\u3067\\u5206\\u5272\\u3092\\u3057\\u306a\\u3044\\u306e\\u3067\\u3042\\u308c\\u3070Invoke Zone Separation by angle\\u3092No\\u3001\\u5206\\u5272\\u3059\\u308b\\u306e\\u3067\\u3042\\u308c\\u3070yes+Separation\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\\\/#breadcrumblist\"},\"datePublished\":\"2023-01-31T08:53:49+00:00\",\"dateModified\":\"2023-07-31T12:36:53+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"\u2014- Warning\u2014 Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment \u2014- Warning\u2014 To separate out zones, Edit the task and in Advanced Options, set \u2018Invoke Zone Separation by Angle?\u2019 to \u2018yes\u2019 | Ansys Knowledge","description":"Workflow\u3067\u30e1\u30c3\u30b7\u30e5\u3092\u4f5c\u6210\u3059\u308b\u969b\u306b\u4e0b\u8a18warrning\u304c\u51fa\u308b\u5834\u5408\u304c\u3054\u3056\u3044\u307e\u3059\u3002 ---- Warning--- Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment ---- Warning--- To separate out zones, Edit the task and in Advanced Options, set 'Invoke Zone Separation by Angle?' to 'yes' Fluent Meshing\u306f\u81ea\u52d5\u7684\u306b\u89d2\u5ea6\uff08\u9762\u30e1\u30c3\u30b7\u30e5\u9593\u306e\u89d2\u5ea6\uff09\u3092\u57fa\u6e96\u306b\u9762\u30be\u30fc\u30f3\u3092\u5206\u96e2\u3057\u3088\u3046\u3068\u3057\u307e\u3059\u304c\u305d\u308c\u304c\u5b9f\u884c\u3055\u308c\u306a\u304b\u3063\u305f\u3068\u3044\u3046\u5185\u5bb9\u3067\u3059\u3002 \u5f62\u72b6\u3084\u3067\u304d\u305f\u30e1\u30c3\u30b7\u30e5\u304c\u554f\u984c\u306a\u3051\u308c\u3070\u305d\u306e\u307e\u307e\u3067\u3082\u7d50\u69cb\u3067\u3059\u304c\u554f\u984c\u304c\u3042\u308b\u5834\u5408\u306fGenerate the Surface Mesh\u306eAdvanced Options\u3067\u5bfe\u5fdc\u53ef\u80fd\u3067\u3059\u3002 \u30c7\u30d5\u30a9\u30eb\u30c8\u306fauto\u3067\u3059\u306e\u3067\u5206\u5272\u3092\u3057\u306a\u3044\u306e\u3067\u3042\u308c\u3070Invoke Zone Separation by angle\u3092No\u3001\u5206\u5272\u3059\u308b\u306e\u3067\u3042\u308c\u3070yes+Separation","canonical_url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/knowledge","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","position":2,"name":"Topics","item":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/watertight\/?template=japan#listItem","name":"Watertight"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/watertight\/?template=japan#listItem","position":3,"name":"Watertight","item":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/watertight\/?template=japan","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/#listItem","name":"&#8212;- Warning&#8212; Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment &#8212;- Warning&#8212; To separate out zones, Edit the task and in Advanced Options, set &#8216;Invoke Zone Separation by Angle?&#8217; to &#8216;yes&#8217;"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/#listItem","position":4,"name":"&#8212;- Warning&#8212; Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment &#8212;- Warning&#8212; To separate out zones, Edit the task and in Advanced Options, set &#8216;Invoke Zone Separation by Angle?&#8217; to &#8216;yes&#8217;","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/watertight\/?template=japan#listItem","name":"Watertight"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization","name":"Ansys Knowledge","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/knowledge\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/#webpage","url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/","name":"\u2014- Warning\u2014 Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment \u2014- Warning\u2014 To separate out zones, Edit the task and in Advanced Options, set \u2018Invoke Zone Separation by Angle?\u2019 to \u2018yes\u2019 | Ansys Knowledge","description":"Workflow\u3067\u30e1\u30c3\u30b7\u30e5\u3092\u4f5c\u6210\u3059\u308b\u969b\u306b\u4e0b\u8a18warrning\u304c\u51fa\u308b\u5834\u5408\u304c\u3054\u3056\u3044\u307e\u3059\u3002 ---- Warning--- Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment ---- Warning--- To separate out zones, Edit the task and in Advanced Options, set 'Invoke Zone Separation by Angle?' to 'yes' Fluent Meshing\u306f\u81ea\u52d5\u7684\u306b\u89d2\u5ea6\uff08\u9762\u30e1\u30c3\u30b7\u30e5\u9593\u306e\u89d2\u5ea6\uff09\u3092\u57fa\u6e96\u306b\u9762\u30be\u30fc\u30f3\u3092\u5206\u96e2\u3057\u3088\u3046\u3068\u3057\u307e\u3059\u304c\u305d\u308c\u304c\u5b9f\u884c\u3055\u308c\u306a\u304b\u3063\u305f\u3068\u3044\u3046\u5185\u5bb9\u3067\u3059\u3002 \u5f62\u72b6\u3084\u3067\u304d\u305f\u30e1\u30c3\u30b7\u30e5\u304c\u554f\u984c\u306a\u3051\u308c\u3070\u305d\u306e\u307e\u307e\u3067\u3082\u7d50\u69cb\u3067\u3059\u304c\u554f\u984c\u304c\u3042\u308b\u5834\u5408\u306fGenerate the Surface Mesh\u306eAdvanced Options\u3067\u5bfe\u5fdc\u53ef\u80fd\u3067\u3059\u3002 \u30c7\u30d5\u30a9\u30eb\u30c8\u306fauto\u3067\u3059\u306e\u3067\u5206\u5272\u3092\u3057\u306a\u3044\u306e\u3067\u3042\u308c\u3070Invoke Zone Separation by angle\u3092No\u3001\u5206\u5272\u3059\u308b\u306e\u3067\u3042\u308c\u3070yes+Separation","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/#breadcrumblist"},"datePublished":"2023-01-31T08:53:49+00:00","dateModified":"2023-07-31T12:36:53+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website","url":"https:\/\/innovationspace.ansys.com\/knowledge\/","name":"Ansys Knowledge","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Knowledge | Ansys Innovation Space","og:type":"article","og:title":"\u2014- Warning\u2014 Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment \u2014- Warning\u2014 To separate out zones, Edit the task and in Advanced Options, set \u2018Invoke Zone Separation by Angle?\u2019 to \u2018yes\u2019 | Ansys Knowledge","og:description":"Workflow\u3067\u30e1\u30c3\u30b7\u30e5\u3092\u4f5c\u6210\u3059\u308b\u969b\u306b\u4e0b\u8a18warrning\u304c\u51fa\u308b\u5834\u5408\u304c\u3054\u3056\u3044\u307e\u3059\u3002 ---- Warning--- Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment ---- Warning--- To separate out zones, Edit the task and in Advanced Options, set 'Invoke Zone Separation by Angle?' to 'yes' Fluent Meshing\u306f\u81ea\u52d5\u7684\u306b\u89d2\u5ea6\uff08\u9762\u30e1\u30c3\u30b7\u30e5\u9593\u306e\u89d2\u5ea6\uff09\u3092\u57fa\u6e96\u306b\u9762\u30be\u30fc\u30f3\u3092\u5206\u96e2\u3057\u3088\u3046\u3068\u3057\u307e\u3059\u304c\u305d\u308c\u304c\u5b9f\u884c\u3055\u308c\u306a\u304b\u3063\u305f\u3068\u3044\u3046\u5185\u5bb9\u3067\u3059\u3002 \u5f62\u72b6\u3084\u3067\u304d\u305f\u30e1\u30c3\u30b7\u30e5\u304c\u554f\u984c\u306a\u3051\u308c\u3070\u305d\u306e\u307e\u307e\u3067\u3082\u7d50\u69cb\u3067\u3059\u304c\u554f\u984c\u304c\u3042\u308b\u5834\u5408\u306fGenerate the Surface Mesh\u306eAdvanced Options\u3067\u5bfe\u5fdc\u53ef\u80fd\u3067\u3059\u3002 \u30c7\u30d5\u30a9\u30eb\u30c8\u306fauto\u3067\u3059\u306e\u3067\u5206\u5272\u3092\u3057\u306a\u3044\u306e\u3067\u3042\u308c\u3070Invoke Zone Separation by angle\u3092No\u3001\u5206\u5272\u3059\u308b\u306e\u3067\u3042\u308c\u3070yes+Separation","og:url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/","article:published_time":"2023-01-31T08:53:49+00:00","article:modified_time":"2023-07-31T12:36:53+00:00","twitter:card":"summary_large_image","twitter:title":"\u2014- Warning\u2014 Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment \u2014- Warning\u2014 To separate out zones, Edit the task and in Advanced Options, set \u2018Invoke Zone Separation by Angle?\u2019 to \u2018yes\u2019 | Ansys Knowledge","twitter:description":"Workflow\u3067\u30e1\u30c3\u30b7\u30e5\u3092\u4f5c\u6210\u3059\u308b\u969b\u306b\u4e0b\u8a18warrning\u304c\u51fa\u308b\u5834\u5408\u304c\u3054\u3056\u3044\u307e\u3059\u3002 ---- Warning--- Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment ---- Warning--- To separate out zones, Edit the task and in Advanced Options, set 'Invoke Zone Separation by Angle?' to 'yes' Fluent Meshing\u306f\u81ea\u52d5\u7684\u306b\u89d2\u5ea6\uff08\u9762\u30e1\u30c3\u30b7\u30e5\u9593\u306e\u89d2\u5ea6\uff09\u3092\u57fa\u6e96\u306b\u9762\u30be\u30fc\u30f3\u3092\u5206\u96e2\u3057\u3088\u3046\u3068\u3057\u307e\u3059\u304c\u305d\u308c\u304c\u5b9f\u884c\u3055\u308c\u306a\u304b\u3063\u305f\u3068\u3044\u3046\u5185\u5bb9\u3067\u3059\u3002 \u5f62\u72b6\u3084\u3067\u304d\u305f\u30e1\u30c3\u30b7\u30e5\u304c\u554f\u984c\u306a\u3051\u308c\u3070\u305d\u306e\u307e\u307e\u3067\u3082\u7d50\u69cb\u3067\u3059\u304c\u554f\u984c\u304c\u3042\u308b\u5834\u5408\u306fGenerate the Surface Mesh\u306eAdvanced Options\u3067\u5bfe\u5fdc\u53ef\u80fd\u3067\u3059\u3002 \u30c7\u30d5\u30a9\u30eb\u30c8\u306fauto\u3067\u3059\u306e\u3067\u5206\u5272\u3092\u3057\u306a\u3044\u306e\u3067\u3042\u308c\u3070Invoke Zone Separation by angle\u3092No\u3001\u5206\u5272\u3059\u308b\u306e\u3067\u3042\u308c\u3070yes+Separation"},"aioseo_meta_data":{"post_id":"162437","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2025-10-17 19:47:54","updated":"2026-07-29 07:19:41","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/\" title=\"Topics\">Topics<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/watertight\/?template=japan\" title=\"Watertight\">Watertight<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t\u2014- Warning\u2014 Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment \u2014- Warning\u2014 To separate out zones, Edit the task and in Advanced Options, set \u2018Invoke Zone Separation by Angle?\u2019 to \u2018yes\u2019\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/knowledge"},{"label":"Topics","link":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/"},{"label":"Watertight","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/watertight\/?template=japan"},{"label":"&#8212;- Warning&#8212; Due to the size of the model, faces of bodies were not automatically separated for capping and\/or size assignment &#8212;- Warning&#8212; To separate out zones, Edit the task and in Advanced Options, set &#8216;Invoke Zone Separation by Angle?&#8217; to &#8216;yes&#8217;","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/warning-due-to-the-size-of-the-model-faces-of-bodies-were-not-automatically-separated-for-capping-and-or-size-assignment-warning-to-separate-out-zones-edit-the-task-and-in-advanced-o\/"}],"acf":[],"custom_fields":[{"0":{"_wp_page_template":["default"],"_bbp_last_active_time":["1-31-2023  20:20:27"],"_bbp_forum_id":["162336"],"_bbp_author_ip":["209.182.204.162"],"_btv_view_count":["1082"],"siebel_km_number":["2067195"],"product_version":["2022 R1"],"km_published_date":["1\/31\/2022 0:50"],"family":["Fluid Dynamics"],"application_name":["FLUENT Meshing\/Tgrid"]},"test":"articlesansys-com"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/162437","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/162437\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/media?parent=162437"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}