{"id":161796,"date":"2023-01-25T07:17:01","date_gmt":"2023-01-25T07:17:01","guid":{"rendered":"\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/"},"modified":"2023-07-31T12:35:55","modified_gmt":"2023-07-31T12:35:55","slug":"is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet","status":"publish","type":"topic","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/","title":{"rendered":"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet?"},"content":{"rendered":"<p>Yes, it is possible. This is because in the calculation of heat flux at flow boundaries, heat of formation is also included.  The energy flux out of a boundary is calculated as the integral of the mass flow rate times the total enthalpy. The total enthalpy contains energy from thermal, chemical, radiation and kinetic energy. This can easily be a negative quantity.  Ignoring radiation and kinetic energy, this flux is:   integral (  m_dot * h ) dA  m_dot is mass flow rate, A is face area and h is the enthalpy, defined as:  h = Sum ( Y_k * h_k )  where Y_k is the k&#8217;th species mass fraction, and h_k is the k&#8217;th species enthalpy defined as:  h_k = h_k^o + integral_T0^T ( cp_k dT )  where h_k^o is the enthalpy of formation, T0 is the reference temp, and cp_k is the specific heat of species k.  This definition of enthalpy is completely relative and it is possible to get negative values.  For example, an air stream with O2 and N2. The enthalpy of formation is 0 for both O2  and N2, and hence if the inlet temperature T is less than the reference temperature T0, the enthalpy will be negative (typically T0 is 300K).<\/p>\n","protected":false},"template":"","class_list":["post-161796","topic","type-topic","status-publish","hentry","topic-tag-4424","topic-tag-fluent","topic-tag-fluid-dynamics","topic-tag-heat-transfer-and-radiation","topic-tag-heat-transfer","topic-tag-other"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"Yes, it is possible. This is because in the calculation of heat flux at flow boundaries, heat of formation is also included. The energy flux out of a boundary is calculated as the integral of the mass flow rate times the total enthalpy. The total enthalpy contains energy from thermal, chemical, radiation and kinetic energy.\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Knowledge | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet? | Ansys Knowledge\" \/>\n\t\t<meta property=\"og:description\" content=\"Yes, it is possible. This is because in the calculation of heat flux at flow boundaries, heat of formation is also included. The energy flux out of a boundary is calculated as the integral of the mass flow rate times the total enthalpy. The total enthalpy contains energy from thermal, chemical, radiation and kinetic energy.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2023-01-25T07:17:01+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2023-07-31T12:35:55+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet? | Ansys Knowledge\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Yes, it is possible. This is because in the calculation of heat flux at flow boundaries, heat of formation is also included. The energy flux out of a boundary is calculated as the integral of the mass flow rate times the total enthalpy. The total enthalpy contains energy from thermal, chemical, radiation and kinetic energy.\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"position\":2,\"name\":\"Topics\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/fluent\\\/#listItem\",\"name\":\"fluent\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/fluent\\\/#listItem\",\"position\":3,\"name\":\"fluent\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/fluent\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\\\/#listItem\",\"name\":\"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet?\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/topics\\\/#listItem\",\"name\":\"Topics\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\\\/#listItem\",\"position\":4,\"name\":\"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet?\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic-tag\\\/fluent\\\/#listItem\",\"name\":\"fluent\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\\\/\",\"name\":\"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet? | Ansys Knowledge\",\"description\":\"Yes, it is possible. This is because in the calculation of heat flux at flow boundaries, heat of formation is also included. The energy flux out of a boundary is calculated as the integral of the mass flow rate times the total enthalpy. The total enthalpy contains energy from thermal, chemical, radiation and kinetic energy.\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/forums\\\/topic\\\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\\\/#breadcrumblist\"},\"datePublished\":\"2023-01-25T07:17:01+00:00\",\"dateModified\":\"2023-07-31T12:35:55+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/\",\"name\":\"Ansys Knowledge\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/knowledge\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet? | Ansys Knowledge","description":"Yes, it is possible. This is because in the calculation of heat flux at flow boundaries, heat of formation is also included. The energy flux out of a boundary is calculated as the integral of the mass flow rate times the total enthalpy. The total enthalpy contains energy from thermal, chemical, radiation and kinetic energy.","canonical_url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/knowledge","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","position":2,"name":"Topics","item":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/fluent\/#listItem","name":"fluent"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/fluent\/#listItem","position":3,"name":"fluent","item":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/fluent\/","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/#listItem","name":"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet?"},"previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/#listItem","name":"Topics"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/#listItem","position":4,"name":"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet?","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/fluent\/#listItem","name":"fluent"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization","name":"Ansys Knowledge","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/knowledge\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/#webpage","url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/","name":"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet? | Ansys Knowledge","description":"Yes, it is possible. This is because in the calculation of heat flux at flow boundaries, heat of formation is also included. The energy flux out of a boundary is calculated as the integral of the mass flow rate times the total enthalpy. The total enthalpy contains energy from thermal, chemical, radiation and kinetic energy.","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/#breadcrumblist"},"datePublished":"2023-01-25T07:17:01+00:00","dateModified":"2023-07-31T12:35:55+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#website","url":"https:\/\/innovationspace.ansys.com\/knowledge\/","name":"Ansys Knowledge","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/knowledge\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Knowledge | Ansys Innovation Space","og:type":"article","og:title":"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet? | Ansys Knowledge","og:description":"Yes, it is possible. This is because in the calculation of heat flux at flow boundaries, heat of formation is also included. The energy flux out of a boundary is calculated as the integral of the mass flow rate times the total enthalpy. The total enthalpy contains energy from thermal, chemical, radiation and kinetic energy.","og:url":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/","article:published_time":"2023-01-25T07:17:01+00:00","article:modified_time":"2023-07-31T12:35:55+00:00","twitter:card":"summary_large_image","twitter:title":"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet? | Ansys Knowledge","twitter:description":"Yes, it is possible. This is because in the calculation of heat flux at flow boundaries, heat of formation is also included. The energy flux out of a boundary is calculated as the integral of the mass flow rate times the total enthalpy. The total enthalpy contains energy from thermal, chemical, radiation and kinetic energy."},"aioseo_meta_data":{"post_id":"161796","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2025-10-17 19:24:41","updated":"2026-07-29 06:14:27","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/\" title=\"Topics\">Topics<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/fluent\/\" title=\"fluent\">fluent<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tIs it possible to have negative heat flux at the inlet and positive heat flux at the outlet?\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/knowledge"},{"label":"Topics","link":"https:\/\/innovationspace.ansys.com\/knowledge\/topics\/"},{"label":"fluent","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic-tag\/fluent\/"},{"label":"Is it possible to have negative heat flux at the inlet and positive heat flux at the outlet?","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/is-it-possible-to-have-negative-heat-flux-at-the-inlet-and-positive-heat-flux-at-the-outlet\/"}],"acf":[],"custom_fields":[{"0":{"_wp_page_template":["default"],"_bbp_forum_id":["27791"],"_bbp_author_ip":["23.56.168.180"],"_bbp_last_active_time":["1-24-2023  20:20:32"],"_btv_view_count":["4291"],"siebel_km_number":["879"],"product_version":["16"],"km_published_date":["2003-10-13T17:30:00.000Z"],"family":["Fluid Dynamics"],"application_name":["FLUENT"]},"test":"articlesansys-com"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/161796","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/161796\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/media?parent=161796"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}