{"id":160179,"date":"2022-09-26T10:00:48","date_gmt":"2022-09-26T10:00:48","guid":{"rendered":"\/knowledge\/forums\/topic\/discovery-aim-application-examples-fluid-solid-heat-transfer-cht\/"},"modified":"2023-08-16T06:33:39","modified_gmt":"2023-08-16T06:33:39","slug":"discovery-aim-application-examples-fluid-solid-heat-transfer-cht","status":"publish","type":"topic","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/discovery-aim-application-examples-fluid-solid-heat-transfer-cht\/","title":{"rendered":"Discovery AIM: Application Examples: Fluid-Solid Heat Transfer (CHT)"},"content":{"rendered":"

In addition to learning the power\u00a0of\u00a0Discovery AIM in these\u00a0tutorials<\/a>, the following\u00a0application examples will expand\u00a0your knowledge and\u00a0discovery\u00a0to new levels.<\/strong><\/p>\n

Download and open these files with saved solutions\u00a0in Discovery AIM and review the setup and solution\u00a0to gain an understanding of what ANSYS\u00a0can help you Discover.<\/strong><\/p>\n

\n

 <\/p>\n

1)\u00a0Fluid-Solid Heat Transfer Simulation of a Cold Plate<\/strong><\/p>\n

Application example of fluid-solid heat transfer of a cold plate. This case is set up with multiple materials in a single solid thermal region. This project requires release 19.0 or newer.<\/p>\n

Fluid-Solid-Heat-Transfer-Simulation-of-a-Cold-Plate.zip<\/a><\/p>\n

\"\"<\/p>\n

\n

 <\/p>\n

2)\u00a0Fluid Flow Thermal Simulation of a Shell Tube Heat Exchanger With Baffles<\/strong><\/p>\n

Application example of a shell tube heat exchanger with baffles simulation. This is a fluid flow and thermal simulation where hot water in the shell is cooled by cold water moving through the tubes. The temperature distribution through the steel structure is also calculated. This project requires release 19.0 or newer.<\/p>\n

Fluid-Flow-Thermal-Simulation-of-a-Shell-Tube-Heat-Exchanger-With-Baffles.zip<\/a><\/p>\n

\"\"<\/p>\n

\n

 <\/p>\n

3) Fluid-Solid Heat Transfer and Structural Simulation of an Air Cooled Engine<\/strong><\/p>\n

Application example of an air cooled engine simulation with fluid-solid heat transfer and structural coupling. A heat source is specified in the engine and convective cooling effects from the surrounding air are calculated as well as the temperature distribution through the engine. The engine temperatures are then sent to a structural simulation, where the thermally induced stresses are calculated. This project requires release 19.0 or newer.<\/p>\n

Fluid-Solid-Heat-Transfer-and-Structural-Simulation-of-an-Air-Cooled-Engine.zip<\/a><\/p>\n

\"<\/p>\n

\n

 <\/p>\n

4) Fluid-Solid Heat Transfer and Structural Simulation of a Cooling Jacket<\/strong><\/p>\n

Application example of a cooling jacket simulation with fluid-solid heat transfer and structural coupling. Hot water is passed through the middle of the device and cold water goes through the jacket. The temperature distribution through the steel jacket is calcaluted. The temperatures are then sent to a structural simulation, where the thermally induced stresses are calculated. This project requires release 19.0 or newer.<\/p>\n

Fluid-Solid-Heat-Transfer-andStructural-Simulation-of-a-Cooling-Jacket.zip<\/a><\/p>\n

\"<\/p>\n

\n