{"id":158059,"date":"2022-06-06T09:58:32","date_gmt":"2022-06-06T09:58:32","guid":{"rendered":"\/knowledge\/forums\/topic\/on-adding-a-block-on-a-solid-mesh-which-is-imported-from-other-application-how-can-one-generate-conformal-mesh-between-solid-block-and-the-imported-solid-mesh-in-mechanical-apdl\/"},"modified":"2022-06-06T09:58:32","modified_gmt":"2022-06-06T09:58:32","slug":"on-adding-a-block-on-a-solid-mesh-which-is-imported-from-other-application-how-can-one-generate-conformal-mesh-between-solid-block-and-the-imported-solid-mesh-in-mechanical-apdl","status":"publish","type":"topic","link":"https:\/\/innovationspace.ansys.com\/knowledge\/forums\/topic\/on-adding-a-block-on-a-solid-mesh-which-is-imported-from-other-application-how-can-one-generate-conformal-mesh-between-solid-block-and-the-imported-solid-mesh-in-mechanical-apdl\/","title":{"rendered":"On adding a block on a solid mesh which is imported from other application, how can one generate conformal mesh between solid block and the imported solid mesh in Mechanical APDL?"},"content":{"rendered":"<p>Follow the steps below to achieve the requirement:<br \/>1. Create the volume with a gap of about 1 average element edge length above the node\/elem face.    <br \/>2. Do an ESURF on the top of the node\/elem face and also on the bottom face of the volume.    <br \/>3. Manually create triangular face elements connecting the edge of the node\/elem region to the edge of the bottom face of the volume.    This needs to make volume that is completely enclosed by the face elements.    <br \/>4. Use FVMESH on that set of face elements to generate tet volume elements that connect the two &#8220;faces&#8221;<\/p>\n","protected":false},"template":"","class_list":["post-158059","topic","type-topic","status-publish","hentry","topic-tag-apdl","topic-tag-conformal-mesh","topic-tag-imported","topic-tag-solid"],"aioseo_notices":[],"acf":[],"custom_fields":[{"0":{"_wp_page_template":["default"],"_bbp_last_active_time":["06-06-2022 20:20"],"_bbp_forum_id":["27793"],"_btv_view_count":["594"],"_bbp_likes_count":["0"]},"test":"articlesansys-com"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/158059","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/topics\/158059\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/knowledge\/wp-json\/wp\/v2\/media?parent=158059"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}