{"id":430424,"date":"2025-04-30T08:51:14","date_gmt":"2025-04-30T08:51:14","guid":{"rendered":"https:\/\/innovationspace.ansys.com\/forum\/forums\/topic\/problem-in-meshing-after-using-share-topology\/"},"modified":"2025-04-30T08:51:14","modified_gmt":"2025-04-30T08:51:14","slug":"problem-in-meshing-after-using-share-topology","status":"publish","type":"topic","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/topic\/problem-in-meshing-after-using-share-topology\/","title":{"rendered":"Problem in meshing after using “Share Topology”"},"content":{"rendered":"

<p>I have disect the geometry into parts, so that I can do sweep meshing, <\/p><p>I can do sweep mesh as you can see on the photo, and the mesh quality also good.<br><br>As my body has multiple parts, I have used share topology which I have enabled from the component property. But when I try to do mesh, I saw all the bodies aren’t sweepable. \"\"<\/p><p>What is the reason of this??<br>How can I resolve the issue??<br>I couldn’t not add inflation in my geometry, when I select the whole body in the geometry scoping method, it shows “x” on it’s left side, you can see from the first picture.<br>How can I add inflation and do the hex mesh??<br><br>I have tried watertight meshing with the disected body and not used share topology in space claim, but in watertight I have used the share topology<br> option and do the poly hex-core mesh, I have also add inflation from boundary layer and after running simulation it show “0 flowrate from the outlet”, I have used pressure inlet when I input gauge pressure= 0Pa, and at pressure outlet, gauge pressure= -4000Pa, it has to come 60-63L\/min flow rate from the outlet.<\/p><\/p>\n","protected":false},"template":"","class_list":["post-430424","topic","type-topic","status-publish","hentry"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t