{"id":37777,"date":"2019-09-18T19:11:36","date_gmt":"2019-09-18T19:11:36","guid":{"rendered":"\/forum\/forums\/topic\/ansys-maxwell-leakage-inductance-calculation-using-energy-solver\/"},"modified":"2019-09-18T19:11:36","modified_gmt":"2019-09-18T19:11:36","slug":"ansys-maxwell-leakage-inductance-calculation-using-energy-solver","status":"closed","type":"topic","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/topic\/ansys-maxwell-leakage-inductance-calculation-using-energy-solver\/","title":{"rendered":"Ansys Maxwell Leakage Inductance Calculation Using Energy Solver"},"content":{"rendered":"

Hi all, I was wondering if anyone could help me with this issue. I am simulating this basic transformer (shown below) with a depth of 2.5 cm and eddy<\/p>\n

<\/p>\n

current effects on. For my simulation set up I have a balloon boundary around the model. For the excitation I set the red (primary winding) and blue (secondary winding) as coils with the appropriate polarity. I then grouped them as windings and add the current excitation. I add all my winding to the matrix so the solver will output the inductance matrix. I’m trying to find the leakage inductance in the model and I have 2 methods to do so. The first is through using equation derived from the 2×2 inductance matrix. I show the derivation below. The total leakage inductance reflected to the primary is L11 – (M^2)\/L22. The other method I am using is energy. I short the secondary winding and make sure that there is no energy in the core so the only energy left in the simulation is energy being stored in the leakage inductance. Then I take the energy output from the convergence tab of maxwell or by taking the volume integral of the energy density in the region around my winding and set it equal to .5*(Lktotal)*Ip^2 (this equation also refers to the primary side). The problem is that both methods give me very different results, with the energy method having a leakage value 10 to 20 times higher than the equation method. When I compare equation method and energy method in magnetostatic solver the results are very close. Am I setting up something wrong in my eddy current simulation or doing something else wrong? Any insight would be great. <\/p>\n

<\/p>\n

 <\/p>\n

<\/p>\n

\"\"<\/p>\n

<\/p>\n

\"\"<\/p>\n","protected":false},"template":"","class_list":["post-37777","topic","type-topic","status-closed","hentry"],"aioseo_notices":[],"acf":[],"custom_fields":[{"0":{"_bbp_old_topic_id":["9955"],"_bbp_old_topic_author_name_id":["Anonymous"],"_bbp_old_is_topic_anonymous_id":["false"],"_bbp_old_closed_status_id":["publish"],"_bbp_author_ip":[null],"_bbp_old_sticky_status_id":["normal"],"_bbp_likes_count":["1"],"_btv_view_count":["5725"],"_bbp_subscription":["243025"],"_bbp_topic_status":["unanswered"],"_bbp_status":["publish"],"_bbp_topic_id":["37777"],"_bbp_forum_id":["27793"],"_bbp_engagement":["34550","168589","185561"],"_bbp_voice_count":["3"],"_bbp_reply_count":["4"],"_bbp_last_reply_id":["140643"],"_bbp_last_active_id":["140643"],"_bbp_last_active_time":["2021-01-30 18:43:55"]},"test":"ngominvt"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics\/37777","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics\/37777\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/media?parent=37777"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}