Hello, <\/p>\n
I am currently trying to analyse the impact of different surface coatings on the torque a solid body creates in a static magnetic field. I am running a 3D Maxwell magnetostatic setup for this.<\/p>\n
The main body should be nearly neutral (so the torque is only resulting from the coating). My problem is, that the coating needs to be very thin, about 100 nm thickness.<\/p>\n
I tried to create solid sheets from the faces of the main body and make their thickness 100 nm. I tried different meshing operations, but either way the meshing caused problems.<\/p>\n
I then tried to make only the coating as a hollow shell body with 100nm wall thickness, but I also had problems with meshing this object. <\/p>\n
So my question is, is it possible to create such thin layers in Maxwell or am I running into software limitations? If it is possible, what would be the best way to represent this and which meshing operations should I use to make it work? Since I am not very experienced in AEDT \/ Maxwell, I might have not tried all possibilities with the meshing, so any help would be greatly appreciated.<\/p>\n
I am using Anys Electronics Desktop 2024R1.<\/p>\n
Thank you, <\/p>\n
Joshua<\/p>\n","protected":false},"template":"","class_list":["post-370267","topic","type-topic","status-closed","hentry","topic-tag-3d-maxwell-simulation","topic-tag-ansys-electronics-desktop","topic-tag-coatings-1","topic-tag-magnetic-field","topic-tag-magnetostatic","topic-tag-magnetostatics","topic-tag-maxwell","topic-tag-mesh","topic-tag-meshing","topic-tag-surface-coating","topic-tag-thin-solid-1","topic-tag-thin-surface","topic-tag-thin-thickness-body-1","topic-tag-torque"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t