{"id":353611,"date":"2024-02-24T13:41:21","date_gmt":"2024-02-24T13:41:21","guid":{"rendered":"\/forum\/forums\/topic\/license-host-connection-problems-lack-of-vendor-information-on-ansys-lumerical-2\/"},"modified":"2024-02-24T13:41:21","modified_gmt":"2024-02-24T13:41:21","slug":"license-host-connection-problems-lack-of-vendor-information-on-ansys-lumerical-2","status":"closed","type":"topic","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/topic\/license-host-connection-problems-lack-of-vendor-information-on-ansys-lumerical-2\/","title":{"rendered":"License-Host Connection Problems – Lack of Vendor Information on Ansys Lumerical"},"content":{"rendered":"
\n
I recently installed Ansys Optics Launcher 2024 R1, and I was required to download the License Manager in order to obtain access to one of the applications (Planar silicon solar cell; HEAT, FEEM, CHARGE). I followed all necessary steps on https:\/\/optics.ansys.com\/hc\/en-us\/articles\/5524575275283 but when I open Ansys Client settings from the Optics “Licenses Portal”, It shows an error in trying to connect my license. I figured this was because I had put a default port and “localhost” as my servers because my License Manager was running on the same computer as my Optics Program Files.<\/p>\n

What I did to try and rectify the issue was I installed the License Manager, and it took me to the browser interface. There were a few PDF files given on the launch page, and I followed the instructions in those to obtain a legitimate license.<\/p>\n

So on the browser, I went to “Add a new license” and I tried attaching my LICENSE.txt document which I found in the path: C:\\Users\\rishi\\Downloads\\ANSYSLICMAN_2024R1_WINX64, and it said this:<\/p>\n

“Did not upload file – Error: A correctly formatted VENDOR line was not found in the license file.”<\/p>\n

I also tried connecting the license.rtf document which I somehow got in the path:<\/p>\n

C:\\Program Files\\ANSYS Inc\\ANSYS Optics\\v241\\Launcher<\/p>\n

and it gave the same message. I don’t really know what to do and which document to use in order to get my license configured, and I’m stuck. The diagnostics I got from this issue are at the end of this mail.<\/p>\n

I also got a bunch of random files, some of which seem to be license texts, some simulation setups, and other files that I haven’t tried or tested yet, and I wanted to know which one I am supposed to look into.<\/p>\n

I found said additional documents in
C:\\Program Files\\ANSYS Inc\\ANSYS Optics\\v241\\Launcher\\licensingclient\\winx64
and
C:\\Program Files\\ANSYS Inc\\ANSYS Optics\\v241\\Launcher\\licensingclient\\winx64\\LicensingSettingsUtility<\/p>\n

respectively.<\/p>\n

If someone could help me with this that would be amazing!<\/p>\n

Here is the dialogue box with the code that ran, which popped up after these processes occured, for reference:<\/p>\n

Creating temporary folder:
—————————-<\/p>\n

C:\\Users\\rishi\\AppData\\Local\\Temp\\AnsysDiagnostics_20240114094813<\/p>\n

Getting system date:
———————-<\/p>\n

2024-01-14T04:18:13.232Z<\/p>\n

Getting system information:
—————————–<\/p>\n

{
“version”: “4.34.23”,
“system”: {
“manufacturer”: “LENOVO”,
“model”: “82R1”,
“version”: “IdeaPad 1 15ADA7”,
“serial”: “MP28TL1B”,
“uuid”: “40e07878-e08f-11ec-810f-e4a8dfce1df6”,
“sku”: “LENOVO_MT_82R1_BU_idea_FM_IdeaPad 1 15ADA7”,
“virtual”: false
},
“bios”: {
“vendor”: “LENOVO”,
“version”: “LENOVO – 1”,
“releaseDate”: “2022-03-08”,
“revision”: “”
},
“baseboard”: {
“manufacturer”: “LENOVO”,
“model”: “LNVNB161216”,
“version”: “SDK0T76486 WIN”,
“serial”: “MP28TL1B”,
“assetTag”: “”
},
“chassis”: {
“manufacturer”: “LENOVO”,
“model”: “”,
“type”: “Notebook”,
“version”: “IdeaPad 1 15ADA7”,
“serial”: “MP28TL1B”,
“assetTag”: “”,
“sku”: “”
},
“os”: {
“platform”: “win32”,
“distro”: “Microsoft Windows 11 Home Single Language”,
“release”: “10.0.22621”,
“codename”: “”,
“kernel”: “10.0.22621”,
“arch”: “x64”,
“hostname”: “Peterkeys”,
“fqdn”: “PETERKEYS.%USERDNSDOMAIN%”,
“codepage”: ” 437″,
“logofile”: “windows”,
“serial”: “00356-24594-66338-AAOEM”,
“build”: “22621”,
“servicepack”: “0.0”,
“uefi”: false
},
“uuid”: {
“os”: “cb8abfaf-3575-4513-84fb-d9747bdcf0f1”
},
“versions”: {
“kernel”: “10.0.22621”,
“openssl”: “1.1.1”,
“systemOpenssl”: “”,
“systemOpensslLib”: “”,
“node”: “16.16.0”,
“v8”: “10.6.194.27-electron.0”,
“npm”: “”,
“yarn”: “”,
“pm2”: “”,
“gulp”: “”,
“grunt”: “”,
“git”: “”,
“tsc”: “”,
“mysql”: “”,
“redis”: “”,
“mongodb”: “”,
“apache”: “”,
“nginx”: “”,
“php”: “”,
“docker”: “”,
“postfix”: “”,
“postgresql”: “”,
“perl”: “”,
“python”: “”,
“python3”: “”,
“pip”: “”,
“pip3”: “”,
“java”: “”,
“gcc”: “”,
“virtualbox”: “”,
“dotnet”: “”
},
“cpu”: {
“manufacturer”: “AMD”,
“brand”: “Ryzen 3 3250U with Radeon Graphics”,
“vendor”: “AuthenticAMD”,
“family”: “23”,
“model”: “24”,
“stepping”: “1”,
“revision”: “6145”,
“voltage”: “”,
“speed”: “2.5”,
“speedmin”: “”,
“speedmax”: “2.60”,
“governor”: “”,
“cores”: 4,
“physicalCores”: 2,
“processors”: 1,
“socket”: “None”,
“cache”: {
“l1d”: 0,
“l1i”: 0,
“l2”: 1048576,
“l3”: 4194304
},
“flags”: “de pse tsc msr sep mtrr mca cmov psn clfsh ds mmx fxsr sse sse2 ss htt tm ia64 pbe”
},
“graphics”: {
“controllers”: [
{
“vendor”: “Advanced Micro Devices, Inc.”,
“model”: “AMD Radeon(TM) Vega 3 Graphics”,
“bus”: “PCI”,
“vram”: 2048,
“vramDynamic”: true,
“subDeviceId”: “381C17AA”
}
],
“displays”: [
{
“vendor”: “(Standard monitor types)”,
“model”: “Generic PnP Monitor”,
“deviceName”: “\\\\\\\\.\\\\DISPLAY1”,
“main”: true,
“builtin”: true,
“connection”: “INTERNAL”,
“resolutionx”: 1920,
“resolutiony”: 1080,
“sizex”: 34,
“sizey”: 19,
“pixeldepth”: 32,
“currentResX”: 1536,
“currentResY”: 864,
“positionX”: 0,
“positionY”: 0,
“currentRefreshRate”: 60
}
]
},
“net”: [
{
“iface”: “Wi-Fi”,
“ifaceName”: “Realtek 8822CE Wireless LAN 802.11ac PCI-E NIC”,
“ip4”: “192.168.68.111”,
“ip4subnet”: “255.255.255.0”,
“ip6”: “fe80::fae3:43fa:66e0:b6ee”,
“ip6subnet”: “ffff:ffff:ffff:ffff::”,
“mac”: “3c:55:76:22:3e:8b”,
“internal”: false,
“virtual”: false,
“operstate”: “up”,
“type”: “wireless”,
“duplex”: “”,
“mtu”: “”,
“speed”: 325,
“dhcp”: “true”,
“dnsSuffix”: “”,
“ieee8021xAuth”: “Not defined”,
“ieee8021xState”: “Disabled”,
“carrierChanges”: 0
},
{
“iface”: “Loopback Pseudo-Interface 1”,
“ifaceName”: “Loopback Pseudo-Interface 1”,
“ip4”: “127.0.0.1”,
“ip4subnet”: “255.0.0.0”,
“ip6”: “::1”,
“ip6subnet”: “ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff”,
“mac”: “00:00:00:00:00:00”,
“internal”: true,
“virtual”: false,
“operstate”: “down”,
“type”: “”,
“duplex”: “”,
“mtu”: “”,
“speed”: -1,
“dhcp”: false,
“dnsSuffix”: “”,
“ieee8021xAuth”: “Not defined”,
“ieee8021xState”: “Disabled”,
“carrierChanges”: 0
},
{
“iface”: “Bluetooth Device (Personal Area Network)”,
“ifaceName”: “Bluetooth Device (Personal Area Network)”,
“ip4”: “”,
“ip4subnet”: “”,
“ip6”: “”,
“ip6subnet”: “”,
“mac”: “3c:55:76:22:3e:8c”,
“virtual”: false,
“operstate”: “down”,
“type”: “wired”,
“duplex”: “”,
“mtu”: “”,
“speed”: 3,
“dhcp”: “true”,
“dnsSuffix”: “”,
“ieee8021xAuth”: “Not defined”,
“ieee8021xState”: “Disabled”,
“carrierChanges”: 0
}
],
“memLayout”: [
{
“size”: 8589934592,
“bank”: “P0 CHANNEL B”,
“type”: “Unknown”,
“clockSpeed”: 2400,
“formFactor”: “SODIMM”,
“manufacturer”: “Ramaxel Technology”,
“partNum”: “RMSA3310MF96HAF-3200”,
“serialNum”: “11AE44D2”,
“voltageConfigured”: 1.2,
“voltageMin”: 1.2,
“voltageMax”: 1.2
}
],
“diskLayout”: [
{
“device”: “”,
“type”: “SSD”,
“name”: “Micron MTFDHBA512QFD”,
“vendor”: “(Standard disk drives)”,
“size”: 512105932800,
“bytesPerSector”: 512,
“totalCylinders”: 62260,
“totalHeads”: 255,
“totalSectors”: 1000206900,
“totalTracks”: 15876300,
“tracksPerCylinder”: 255,
“sectorsPerTrack”: 63,
“firmwareRevision”: “0013P6LN”,
“serialNum”: “00A0_7501_3689_B4FE.”,
“interfaceType”: “NVMe”,
“smartStatus”: “Ok”
}
]
}<\/p>\n

Getting environment variables:
——————————–<\/p>\n

{
“ALLUSERSPROFILE”: “C:\\\\ProgramData”,
“ANSYSEMSV_ROOT232”: “C:\\\\Program Files\\\\AnsysEM\\\\Ansys Student\\\\v232\\\\Win64”,
“ANSYSLIC_DIR”: “C:\\\\Program Files\\\\ANSYS Inc\\\\Shared Files\\\\Licensing”,
“APPDATA”: “C:\\\\Users\\\\rishi\\\\AppData\\\\Roaming”,
“CommonProgramFiles”: “C:\\\\Program Files\\\\Common Files”,
“CommonProgramFiles(x86)”: “C:\\\\Program Files (x86)\\\\Common Files”,
“CommonProgramW6432”: “C:\\\\Program Files\\\\Common Files”,
“COMPUTERNAME”: “PETERKEYS”,
“ComSpec”: “C:\\\\WINDOWS\\\\system32\\\\cmd.exe”,
“DriverData”: “C:\\\\Windows\\\\System32\\\\Drivers\\\\DriverData”,
“HOME”: “C:\\\\Users\\\\rishi”,
“HOMEDRIVE”: “C:”,
“HOMEPATH”: “\\\\Users\\\\rishi”,
“INTEL_LICENSE_FILE”: “C:\\\\Program Files (x86)\\\\Common Files\\\\Intel\\\\Licenses”,
“I_MPI_ROOT”: “C:\\\\Program Files (x86)\\\\IntelSWToolsMPI\\\\compilers_and_libraries_2020.4.321\\\\windows\\\\mpi”,
“LOCALAPPDATA”: “C:\\\\Users\\\\rishi\\\\AppData\\\\Local”,
“LOGONSERVER”: “\\\\\\\\PETERKEYS”,
“MSMPI_BENCHMARKS”: “C:\\\\Program Files\\\\Microsoft MPI\\\\Benchmarks\\\\”,
“MSMPI_BIN”: “C:\\\\Program Files\\\\Microsoft MPI\\\\Bin\\\\”,
“NUMBER_OF_PROCESSORS”: “4”,
“OneDrive”: “C:\\\\Users\\\\rishi\\\\OneDrive”,
“OneDriveConsumer”: “C:\\\\Users\\\\rishi\\\\OneDrive”,
“ORIGINAL_XDG_CURRENT_DESKTOP”: “undefined”,
“OS”: “Windows_NT”,
“Path”: “C:\\\\Program Files\\\\Microsoft MPI\\\\Bin\\\\;C:\\\\Program Files (x86)\\\\IntelSWToolsMPI\\\\compilers_and_libraries_2020.4.321\\\\windows\\\\mpi\\\\intel64\\\\bin;C:\\\\WINDOWS\\\\system32;C:\\\\WINDOWS;C:\\\\WINDOWS\\\\System32\\\\Wbem;C:\\\\WINDOWS\\\\System32\\\\WindowsPowerShell\\\\v1.0\\\\;C:\\\\WINDOWS\\\\System32\\\\OpenSSH\\\\;C:\\\\Users\\\\rishi\\\\AppData\\\\Local\\\\Microsoft\\\\WindowsApps”,
“PATHEXT”: “.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC”,
“PROCESSOR_ARCHITECTURE”: “AMD64”,
“PROCESSOR_IDENTIFIER”: “AMD64 Family 23 Model 24 Stepping 1, AuthenticAMD”,
“PROCESSOR_LEVEL”: “23”,
“PROCESSOR_REVISION”: “1801”,
“ProgramData”: “C:\\\\ProgramData”,
“ProgramFiles”: “C:\\\\Program Files”,
“ProgramFiles(x86)”: “C:\\\\Program Files (x86)”,
“ProgramW6432”: “C:\\\\Program Files”,
“PSModulePath”: “C:\\\\Program Files\\\\WindowsPowerShell\\\\Modules;C:\\\\WINDOWS\\\\system32\\\\WindowsPowerShell\\\\v1.0\\\\Modules”,
“PUBLIC”: “C:\\\\Users\\\\Public”,
“SIMPLORER_HOME”: “C:\\\\Program Files\\\\AnsysEM\\\\Ansys Student\\\\v232\\\\Win64”,
“SIWAVE_INSTALL_DIR”: “C:\\\\Program Files\\\\AnsysEM\\\\Ansys Student\\\\v232\\\\Win64”,
“SSL_CERT_DIR”: “C:\\\\Users\\\\rishi\\\\.local\\\\win-ca\\\\pem”,
“SystemDrive”: “C:”,
“SystemRoot”: “C:\\\\WINDOWS”,
“TEMP”: “C:\\\\Users\\\\rishi\\\\AppData\\\\Local\\\\Temp”,
“TMP”: “C:\\\\Users\\\\rishi\\\\AppData\\\\Local\\\\Temp”,
“USERDOMAIN”: “PETERKEYS”,
“USERDOMAIN_ROAMINGPROFILE”: “PETERKEYS”,
“USERNAME”: “rishi”,
“USERPROFILE”: “C:\\\\Users\\\\rishi”,
“windir”: “C:\\\\WINDOWS”,
“__COMPAT_LAYER”: “Installer”
}<\/p>\n

Getting firewall settings:
—————————-<\/p>\n

netsh firewall show allowedprogram<\/p>\n

Allowed programs configuration for Domain profile:
Mode Traffic direction Name \/ Program
——————————————————————-
Enable Inbound Lumerical v241 INTERCONNECT MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\interconnect-msmpi.exe
Enable Inbound Lumerical v241 INTERCONNECT Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\interconnect-impi.exe
Enable Inbound Lumerical v241 MQW MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\mqw-engine-msmpi.exe
Enable Inbound Lumerical v241 MQW Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\mqw-engine-impi.exe
Enable Inbound Lumerical v241 MQW \/ C:\\Program Files\\Lumerical\\v241\\bin\\mqw-engine.exe
Enable Inbound Lumerical v241 FEEM MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\feem-engine-msmpi.exe
Enable Inbound Lumerical v241 FEEM Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\feem-engine-impi.exe
Enable Inbound Lumerical v241 FEEM \/ C:\\Program Files\\Lumerical\\v241\\bin\\feem-engine.exe
Enable Inbound Lumerical v241 DGTD MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\dgtd-engine-msmpi.exe
Enable Inbound Lumerical v241 DGTD Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\dgtd-engine-impi.exe
Enable Inbound Lumerical v241 DGTD \/ C:\\Program Files\\Lumerical\\v241\\bin\\dgtd-engine.exe
Enable Inbound Lumerical v241 HEAT MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\thermal-engine-msmpi.exe
Enable Inbound Lumerical v241 HEAT Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\thermal-engine-impi.exe
Enable Inbound Lumerical v241 HEAT \/ C:\\Program Files\\Lumerical\\v241\\bin\\thermal-engine.exe
Enable Inbound Lumerical v241 CHARGE MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\device-engine-msmpi.exe
Enable Inbound Lumerical v241 CHARGE Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\device-engine-impi.exe
Enable Inbound Lumerical v241 CHARGE \/ C:\\Program Files\\Lumerical\\v241\\bin\\device-engine.exe
Enable Inbound Lumerical v241 MODE EME MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\eme-engine-msmpi.exe
Enable Inbound Lumerical v241 MODE EME Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\eme-engine-impi.exe
Enable Inbound Lumerical v241 MODE EME \/ C:\\Program Files\\Lumerical\\v241\\bin\\eme-engine.exe
Enable Inbound Lumerical v241 MODE VarFDTD MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\varfdtd-engine-msmpi.exe
Enable Inbound Lumerical v241 MODE VarFDTD Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\varfdtd-engine-impi.exe
Enable Inbound Lumerical v241 MODE VarFDTD \/ C:\\Program Files\\Lumerical\\v241\\bin\\varfdtd-engine.exe
Enable Inbound Lumerical v241 MODE FD MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\fd-engine-msmpi.exe
Enable Inbound Lumerical v241 MODE FD Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\fd-engine-impi.exe
Enable Inbound Lumerical v241 MODE FD \/ C:\\Program Files\\Lumerical\\v241\\bin\\fd-engine.exe
Enable Inbound Lumerical v241 RCWA MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\rcwa-engine-msmpi.exe
Enable Inbound Lumerical v241 RCWA Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\rcwa-engine-impi.exe
Enable Inbound Lumerical v241 RCWA \/ C:\\Program Files\\Lumerical\\v241\\bin\\rcwa-engine.exe
Enable Inbound Lumerical v241 FDTD MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\fdtd-engine-msmpi.exe
Enable Inbound Lumerical v241 FDTD Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\fdtd-engine-impi.exe
Enable Inbound Lumerical v241 FDTD \/ C:\\Program Files\\Lumerical\\v241\\bin\\fdtd-engine.exe
Enable Inbound Lumerical v241 CPI MS MPI \/ C:\\Program Files\\Lumerical\\v241\\mpitest\\cpi-msmpi.exe
Enable Inbound Lumerical v241 CPI \/ C:\\Program Files\\Lumerical\\v241\\mpitest\\cpi.exe
Enable Inbound Lumerical v241 CPI Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\mpitest\\cpi-impi.exe
Enable Inbound Optics Lumerical v241 Ansys Licensing Client \/ C:\\Program Files\\Lumerical\\v241\\licensingclient\\winx64\\ansyscl.exe
Enable Inbound Optics v241 Ansys Licensing Client \/ C:\\Program Files\\ANSYS Inc\\ANSYS Optics\\v241\\Launcher\\licensingclient\\winx64\\ansyscl.exe
Enable Inbound AnyDesk \/ C:\\Program Files (x86)\\AnyDesk\\AnyDesk.exe
Enable Inbound Lumerical v232 INTERCONNECT MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\interconnect-msmpi.exe
Enable Inbound Lumerical v232 INTERCONNECT Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\interconnect-impi.exe
Enable Inbound Lumerical v232 MQW MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\mqw-engine-msmpi.exe
Enable Inbound Lumerical v232 MQW Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\mqw-engine-impi.exe
Enable Inbound Lumerical v232 MQW \/ C:\\Program Files\\Lumerical\\v232\\bin\\mqw-engine.exe
Enable Inbound Lumerical v232 FEEM MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\feem-engine-msmpi.exe
Enable Inbound Lumerical v232 FEEM Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\feem-engine-impi.exe
Enable Inbound Lumerical v232 FEEM \/ C:\\Program Files\\Lumerical\\v232\\bin\\feem-engine.exe
Enable Inbound Lumerical v232 DGTD MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\dgtd-engine-msmpi.exe
Enable Inbound Lumerical v232 DGTD Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\dgtd-engine-impi.exe
Enable Inbound Lumerical v232 DGTD \/ C:\\Program Files\\Lumerical\\v232\\bin\\dgtd-engine.exe
Enable Inbound Lumerical v232 HEAT MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\thermal-engine-msmpi.exe
Enable Inbound Lumerical v232 HEAT Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\thermal-engine-impi.exe
Enable Inbound Lumerical v232 HEAT \/ C:\\Program Files\\Lumerical\\v232\\bin\\thermal-engine.exe
Enable Inbound Lumerical v232 CHARGE MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\device-engine-msmpi.exe
Enable Inbound Lumerical v232 CHARGE Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\device-engine-impi.exe
Enable Inbound Lumerical v232 CHARGE \/ C:\\Program Files\\Lumerical\\v232\\bin\\device-engine.exe
Enable Inbound Lumerical v232 MODE EME MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\eme-engine-msmpi.exe
Enable Inbound Lumerical v232 MODE EME Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\eme-engine-impi.exe
Enable Inbound Lumerical v232 MODE EME \/ C:\\Program Files\\Lumerical\\v232\\bin\\eme-engine.exe
Enable Inbound Lumerical v232 MODE VarFDTD MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\varfdtd-engine-msmpi.exe
Enable Inbound Lumerical v232 MODE VarFDTD Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\varfdtd-engine-impi.exe
Enable Inbound Lumerical v232 MODE VarFDTD \/ C:\\Program Files\\Lumerical\\v232\\bin\\varfdtd-engine.exe
Enable Inbound Lumerical v232 MODE FD MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\fd-engine-msmpi.exe
Enable Inbound Lumerical v232 MODE FD Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\fd-engine-impi.exe
Enable Inbound Lumerical v232 MODE FD \/ C:\\Program Files\\Lumerical\\v232\\bin\\fd-engine.exe
Enable Inbound Lumerical v232 RCWA MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\rcwa-engine-msmpi.exe
Enable Inbound Lumerical v232 RCWA Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\rcwa-engine-impi.exe
Enable Inbound Lumerical v232 RCWA \/ C:\\Program Files\\Lumerical\\v232\\bin\\rcwa-engine.exe
Enable Inbound Lumerical v232 FDTD MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\fdtd-engine-msmpi.exe
Enable Inbound Lumerical v232 FDTD Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\fdtd-engine-impi.exe
Enable Inbound Lumerical v232 FDTD \/ C:\\Program Files\\Lumerical\\v232\\bin\\fdtd-engine.exe
Enable Inbound Lumerical v232 CPI MS MPI \/ C:\\Program Files\\Lumerical\\v232\\mpitest\\cpi-msmpi.exe
Enable Inbound Lumerical v232 CPI MPICH2 \/ C:\\Program Files\\Lumerical\\v232\\mpitest\\cpi-mpich2.exe
Enable Inbound Lumerical v232 CPI Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\mpitest\\cpi-impi.exe
Enable Inbound Optics Lumerical v232 Ansys Licensing Client \/ C:\\Program Files\\Lumerical\\v232\\licensingclient\\winx64\\ansyscl.exe
Enable Inbound Optics v232 Ansys Licensing Client \/ C:\\Program Files\\ANSYS Inc\\ANSYS Optics\\v232\\Launcher\\licensingclient\\winx64\\ansyscl.exe
Enable Inbound Ansoft Desktop Proxy \/ C:\\Program Files\\AnsysEM\\Ansys Student\\v232\\Win64\\desktopproxy.exe
Enable Inbound Ansys Electronics Desktop Student 2023.2 \/ C:\\Program Files\\AnsysEM\\Ansys Student\\v232\\Win64\\ansysedtsv.exe<\/p>\n

Allowed programs configuration for Standard profile:
Mode Traffic direction Name \/ Program
——————————————————————-
Enable Inbound Lumerical v241 INTERCONNECT MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\interconnect-msmpi.exe
Enable Inbound Lumerical v241 INTERCONNECT Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\interconnect-impi.exe
Enable Inbound Lumerical v241 MQW MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\mqw-engine-msmpi.exe
Enable Inbound Lumerical v241 MQW Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\mqw-engine-impi.exe
Enable Inbound Lumerical v241 MQW \/ C:\\Program Files\\Lumerical\\v241\\bin\\mqw-engine.exe
Enable Inbound Lumerical v241 FEEM MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\feem-engine-msmpi.exe
Enable Inbound Lumerical v241 FEEM Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\feem-engine-impi.exe
Enable Inbound Lumerical v241 FEEM \/ C:\\Program Files\\Lumerical\\v241\\bin\\feem-engine.exe
Enable Inbound Lumerical v241 DGTD MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\dgtd-engine-msmpi.exe
Enable Inbound Lumerical v241 DGTD Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\dgtd-engine-impi.exe
Enable Inbound Lumerical v241 DGTD \/ C:\\Program Files\\Lumerical\\v241\\bin\\dgtd-engine.exe
Enable Inbound Lumerical v241 HEAT MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\thermal-engine-msmpi.exe
Enable Inbound Lumerical v241 HEAT Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\thermal-engine-impi.exe
Enable Inbound Lumerical v241 HEAT \/ C:\\Program Files\\Lumerical\\v241\\bin\\thermal-engine.exe
Enable Inbound Lumerical v241 CHARGE MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\device-engine-msmpi.exe
Enable Inbound Lumerical v241 CHARGE Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\device-engine-impi.exe
Enable Inbound Lumerical v241 CHARGE \/ C:\\Program Files\\Lumerical\\v241\\bin\\device-engine.exe
Enable Inbound Lumerical v241 MODE EME MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\eme-engine-msmpi.exe
Enable Inbound Lumerical v241 MODE EME Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\eme-engine-impi.exe
Enable Inbound Lumerical v241 MODE EME \/ C:\\Program Files\\Lumerical\\v241\\bin\\eme-engine.exe
Enable Inbound Lumerical v241 MODE VarFDTD MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\varfdtd-engine-msmpi.exe
Enable Inbound Lumerical v241 MODE VarFDTD Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\varfdtd-engine-impi.exe
Enable Inbound Lumerical v241 MODE VarFDTD \/ C:\\Program Files\\Lumerical\\v241\\bin\\varfdtd-engine.exe
Enable Inbound Lumerical v241 MODE FD MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\fd-engine-msmpi.exe
Enable Inbound Lumerical v241 MODE FD Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\fd-engine-impi.exe
Enable Inbound Lumerical v241 MODE FD \/ C:\\Program Files\\Lumerical\\v241\\bin\\fd-engine.exe
Enable Inbound Lumerical v241 RCWA MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\rcwa-engine-msmpi.exe
Enable Inbound Lumerical v241 RCWA Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\rcwa-engine-impi.exe
Enable Inbound Lumerical v241 RCWA \/ C:\\Program Files\\Lumerical\\v241\\bin\\rcwa-engine.exe
Enable Inbound Lumerical v241 FDTD MS MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\fdtd-engine-msmpi.exe
Enable Inbound Lumerical v241 FDTD Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\bin\\fdtd-engine-impi.exe
Enable Inbound Lumerical v241 FDTD \/ C:\\Program Files\\Lumerical\\v241\\bin\\fdtd-engine.exe
Enable Inbound Lumerical v241 CPI MS MPI \/ C:\\Program Files\\Lumerical\\v241\\mpitest\\cpi-msmpi.exe
Enable Inbound Lumerical v241 CPI \/ C:\\Program Files\\Lumerical\\v241\\mpitest\\cpi.exe
Enable Inbound Lumerical v241 CPI Intel MPI \/ C:\\Program Files\\Lumerical\\v241\\mpitest\\cpi-impi.exe
Enable Inbound Optics Lumerical v241 Ansys Licensing Client \/ C:\\Program Files\\Lumerical\\v241\\licensingclient\\winx64\\ansyscl.exe
Enable Inbound Optics v241 Ansys Licensing Client \/ C:\\Program Files\\ANSYS Inc\\ANSYS Optics\\v241\\Launcher\\licensingclient\\winx64\\ansyscl.exe
Enable Inbound AnyDesk \/ C:\\Program Files (x86)\\AnyDesk\\AnyDesk.exe
Enable Inbound Lumerical v232 INTERCONNECT MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\interconnect-msmpi.exe
Enable Inbound Lumerical v232 INTERCONNECT Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\interconnect-impi.exe
Enable Inbound Lumerical v232 MQW MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\mqw-engine-msmpi.exe
Enable Inbound Lumerical v232 MQW Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\mqw-engine-impi.exe
Enable Inbound Lumerical v232 MQW \/ C:\\Program Files\\Lumerical\\v232\\bin\\mqw-engine.exe
Enable Inbound Lumerical v232 FEEM MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\feem-engine-msmpi.exe
Enable Inbound Lumerical v232 FEEM Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\feem-engine-impi.exe
Enable Inbound Lumerical v232 FEEM \/ C:\\Program Files\\Lumerical\\v232\\bin\\feem-engine.exe
Enable Inbound Lumerical v232 DGTD MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\dgtd-engine-msmpi.exe
Enable Inbound Lumerical v232 DGTD Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\dgtd-engine-impi.exe
Enable Inbound Lumerical v232 DGTD \/ C:\\Program Files\\Lumerical\\v232\\bin\\dgtd-engine.exe
Enable Inbound Lumerical v232 HEAT MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\thermal-engine-msmpi.exe
Enable Inbound Lumerical v232 HEAT Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\thermal-engine-impi.exe
Enable Inbound Lumerical v232 HEAT \/ C:\\Program Files\\Lumerical\\v232\\bin\\thermal-engine.exe
Enable Inbound Lumerical v232 CHARGE MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\device-engine-msmpi.exe
Enable Inbound Lumerical v232 CHARGE Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\device-engine-impi.exe
Enable Inbound Lumerical v232 CHARGE \/ C:\\Program Files\\Lumerical\\v232\\bin\\device-engine.exe
Enable Inbound Lumerical v232 MODE EME MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\eme-engine-msmpi.exe
Enable Inbound Lumerical v232 MODE EME Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\eme-engine-impi.exe
Enable Inbound Lumerical v232 MODE EME \/ C:\\Program Files\\Lumerical\\v232\\bin\\eme-engine.exe
Enable Inbound Lumerical v232 MODE VarFDTD MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\varfdtd-engine-msmpi.exe
Enable Inbound Lumerical v232 MODE VarFDTD Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\varfdtd-engine-impi.exe
Enable Inbound Lumerical v232 MODE VarFDTD \/ C:\\Program Files\\Lumerical\\v232\\bin\\varfdtd-engine.exe
Enable Inbound Lumerical v232 MODE FD MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\fd-engine-msmpi.exe
Enable Inbound Lumerical v232 MODE FD Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\fd-engine-impi.exe
Enable Inbound Lumerical v232 MODE FD \/ C:\\Program Files\\Lumerical\\v232\\bin\\fd-engine.exe
Enable Inbound Lumerical v232 RCWA MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\rcwa-engine-msmpi.exe
Enable Inbound Lumerical v232 RCWA Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\rcwa-engine-impi.exe
Enable Inbound Lumerical v232 RCWA \/ C:\\Program Files\\Lumerical\\v232\\bin\\rcwa-engine.exe
Enable Inbound Lumerical v232 FDTD MS MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\fdtd-engine-msmpi.exe
Enable Inbound Lumerical v232 FDTD Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\bin\\fdtd-engine-impi.exe
Enable Inbound Lumerical v232 FDTD \/ C:\\Program Files\\Lumerical\\v232\\bin\\fdtd-engine.exe
Enable Inbound Lumerical v232 CPI MS MPI \/ C:\\Program Files\\Lumerical\\v232\\mpitest\\cpi-msmpi.exe
Enable Inbound Lumerical v232 CPI MPICH2 \/ C:\\Program Files\\Lumerical\\v232\\mpitest\\cpi-mpich2.exe
Enable Inbound Lumerical v232 CPI Intel MPI \/ C:\\Program Files\\Lumerical\\v232\\mpitest\\cpi-impi.exe
Enable Inbound Optics Lumerical v232 Ansys Licensing Client \/ C:\\Program Files\\Lumerical\\v232\\licensingclient\\winx64\\ansyscl.exe
Enable Inbound Optics v232 Ansys Licensing Client \/ C:\\Program Files\\ANSYS Inc\\ANSYS Optics\\v232\\Launcher\\licensingclient\\winx64\\ansyscl.exe
Enable Inbound Ansoft Desktop Proxy \/ C:\\Program Files\\AnsysEM\\Ansys Student\\v232\\Win64\\desktopproxy.exe
Enable Inbound Ansys Electronics Desktop Student 2023.2 \/ C:\\Program Files\\AnsysEM\\Ansys Student\\v232\\Win64\\ansysedtsv.exe<\/p>\n

IMPORTANT: Command executed successfully.
However, “netsh firewall” is deprecated;
use “netsh advfirewall firewall” instead.
For more information on using “netsh advfirewall firewall” commands
instead of “netsh firewall”, see KB article 947709
at https:\/\/go.microsoft.com\/fwlink\/?linkid=121488 .<\/p>\n

Getting available license information:
—————————————-<\/p>\n

Checking FNO server…
———————-<\/p>\n

ping ansys-fno.flexnetoperations.com
WARNING: ansys-fno.flexnetoperations.com is not reachable.<\/p>\n

Checking LAAS server…
———————–<\/p>\n

curl -v https:\/\/laas.fnocc.com -o C:\\Users\\rishi\\AppData\\Local\\Temp\\.ansys\\laas_output.log<\/p>\n

% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed<\/p>\n

0 0 0 0 0 0 0 0 –:–:– –:–:– –:–:– 0* Trying 44.238.217.183:443…
* Connected to laas.fnocc.com (44.238.217.183) port 443
* schannel: disabled automatic use of client certificate
* ALPN: curl offers http\/1.1<\/p>\n

0 0 0 0 0 0 0 0 –:–:– –:–:– –:–:– 0* ALPN: server accepted http\/1.1
* using HTTP\/1.1<\/p>\n

0 0 0 0 0 0 0 0 –:–:– 0:00:02 –:–:– 0> GET \/ HTTP\/1.1<\/p>\n

> Host: laas.fnocc.com<\/p>\n

> User-Agent: curl\/8.4.0<\/p>\n

> Accept: *\/*<\/p>\n

><\/p>\n

* schannel: remote party requests renegotiation
* schannel: renegotiating SSL\/TLS connection
* schannel: SSL\/TLS connection renegotiated
* schannel: remote party requests renegotiation
* schannel: renegotiating SSL\/TLS connection
* schannel: SSL\/TLS connection renegotiated
< HTTP\/1.1 302<\/p>\n

< Date: Sun, 14 Jan 2024 04:18:59 GMT<\/p>\n

< Content-Length: 0<\/p>\n

< Connection: keep-alive<\/p>\n

< Set-Cookie: laas-cookie=41229005d91c72dcd8444b201bc041a1|1169eb77ada69db09cacdf5b49a61b8d; Expires=Sun, 14-Jan-24 05:18:59 GMT; Max-Age=3600; Path=\/; Secure; HttpOnly<\/p>\n

< Set-Cookie: JSESSIONID=BEC463BF26A79E1D59D33A5B5D348C93; Path=\/; Secure; HttpOnly<\/p>\n

< X-Content-Type-Options: nosniff<\/p>\n

< X-XSS-Protection: 1; mode=block<\/p>\n

< Cache-Control: no-cache, no-store, max-age=0, must-revalidate<\/p>\n

< Pragma: no-cache<\/p>\n

< Expires: 0<\/p>\n

< Strict-Transport-Security: max-age=15724800; includeSubDomains<\/p>\n

< X-Frame-Options: DENY<\/p>\n

< Location: https:\/\/laas.fnocc.com\/login<\/p>\n

< Content-Language: en-US<\/p>\n

< X-Forwarded-For: 49.43.240.134<\/p>\n

<<\/p>\n

0 0 0 0 0 0 0 0 –:–:– 0:00:02 –:–:– 0
* Connection #0 to host laas.fnocc.com left intact<\/p>\n

Checking proxy settings…
————————–<\/p>\n

[object Object]<\/p>\n

Checking network interfaces…
——————————<\/p>\n

Windows IP Configuration<\/p>\n

Host Name . . . . . . . . . . . . : Peterkeys
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No<\/p>\n

Wireless LAN adapter Local Area Connection* 1:<\/p>\n

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 3E-55-76-22-3E-8B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes<\/p>\n

Wireless LAN adapter Local Area Connection* 2:<\/p>\n

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter #2
Physical Address. . . . . . . . . : BE-55-76-22-3E-8B
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes<\/p>\n

Wireless LAN adapter Wi-Fi:<\/p>\n

Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek 8822CE Wireless LAN 802.11ac PCI-E NIC
Physical Address. . . . . . . . . : 3C-55-76-22-3E-8B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::fae3:43fa:66e0:b6ee%6(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.68.111(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 13 January 2024 23:10:51
Lease Expires . . . . . . . . . . : 14 January 2024 11:32:34
Default Gateway . . . . . . . . . : fe80::a62b:b0ff:fe1d:64cc%6
192.168.68.1
DHCP Server . . . . . . . . . . . : 192.168.68.1
DHCPv6 IAID . . . . . . . . . . . : 104617334
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-2B-68-71-3D-3C-55-76-22-3E-8B
DNS Servers . . . . . . . . . . . : 192.168.29.1
192.168.68.1
NetBIOS over Tcpip. . . . . . . . : Enabled<\/p>\n

Ethernet adapter Bluetooth Network Connection:<\/p>\n

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : 3C-55-76-22-3E-8C
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes<\/p>\n

Copy msinfo32 output file…
—————————-<\/p>\n

msinfo32 \/nfo “C:\\Users\\rishi\\AppData\\Local\\Temp\\AnsysDiagnostics_20240114094813\\ansyssys.nfo”<\/p>\n

Copy install files…
———————<\/p>\n

Copy debug files…
——————-<\/p>\n

Copy subscriptions files…
—————————<\/p>\n

Copy ini file…
—————-<\/p>\n

Copy preferences files…
————————-<\/p>\n

Copy console output file…
—————————<\/p>\n

Creating zip file…
——————–<\/p>\n

Done.<\/p><\/div>\n<\/div>\n","protected":false},"template":"","class_list":["post-353611","topic","type-topic","status-closed","hentry"],"aioseo_notices":[],"acf":[],"custom_fields":[{"0":{"_bbp_subscription":["297498","4274"],"_bbp_author_ip":["23.206.193.154"]," _bbp_last_reply_id":["0"]," _bbp_likes_count":["0"],"_btv_view_count":["1954"],"_bbp_topic_status":["unanswered"],"_bbp_topic_id":["353611"],"_bbp_forum_id":["27816"],"_bbp_engagement":["4274","297498"],"_bbp_voice_count":["2"],"_bbp_reply_count":["1"],"_bbp_last_reply_id":["353913"],"_bbp_last_active_id":["353913"],"_bbp_last_active_time":["2024-02-26 19:58:44"]},"test":"rishikesh-madhuvairygmail-com"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics\/353611","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics\/353611\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/media?parent=353611"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}