{"id":307500,"date":"2023-09-20T14:31:35","date_gmt":"2023-09-20T14:31:35","guid":{"rendered":"\/forum\/?post_type=topic&p=307500"},"modified":"2023-09-20T14:31:35","modified_gmt":"2023-09-20T14:31:35","slug":"about-the-d3plot-files-not-fully-generated","status":"closed","type":"topic","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/topic\/about-the-d3plot-files-not-fully-generated\/","title":{"rendered":"About the d3plot files not fully generated"},"content":{"rendered":"

Hello,<\/p>\n

There is an issue of the Ls-dyna SPH simulation. When I use the solver on my University HPC to do a SPH simulation, the d3plot cannot fully generated. The total set steps are about 102 d3plots for normal termination, while after generating about 80 d3plots, the solver got stuck and the task reported an error after running out of time. However, when I use the LS-Run on my Windows desktop, the job could end normally. The solver version on the HPC is R 10.1 and the local solver on my desktop is R 13.0. I’m not sure whether the solver version led to that issue.<\/p>\n

The message file for the failed job:<\/p>\n

\n
 Date: 09\/15\/2023      Time: 15:40:54  <\/div>\n

<\/p>\n

     ___________________________________________________<\/div>\n
     |                                                 |<\/div>\n
     |  Livermore  Software  Technology  Corporation   |<\/div>\n
     |                                                 |<\/div>\n
     |  7374 Las Positas Road                          |<\/div>\n
     |  Livermore, CA 94551                            |<\/div>\n
     |  Tel: (925) 449-2500  Fax: (925) 449-2507       |<\/div>\n
     |  www.lstc.com                                   |<\/div>\n
     |_________________________________________________|<\/div>\n
     |                                                 |<\/div>\n
     |  LS-DYNA, A Program for Nonlinear Dynamic       |<\/div>\n
     |  Analysis of Structures in Three Dimensions     |<\/div>\n
     |  Version : smp s R10.1.0   Date: 01\/12\/2018     |<\/div>\n
     |  Revision: 123264          Time: 16:34:46       |<\/div>\n
     |                                                 |<\/div>\n
     |  Features enabled in this version:              |<\/div>\n
     |    Shared Memory Parallel                       |<\/div>\n
     |    ANSYS Database format                        |<\/div>\n
     |    ANSYS License (ANSYS192)                     |<\/div>\n
     |                                                 |<\/div>\n
     |  Licensed to:                                   |<\/div>\n
     |                                                 |<\/div>\n
     |  Platform   : Xeon64 System                     |<\/div>\n
     |  OS Level   : Linux 2.6.18 uum                  |<\/div>\n
     |  Compiler   : Intel Fortran Compiler 16.0 SSE2  |<\/div>\n
     |  Hostname   : cascade051                        |<\/div>\n
     |  Precision  : Single precision (I4R4)           |<\/div>\n
     |  SVN Version: 123300                            |<\/div>\n
     |                                                 |<\/div>\n
     |  Unauthorized use infringes LSTC copyrights     |<\/div>\n
     |_________________________________________________|<\/div>\n
 Input file: Run.k                                                                          <\/div>\n

<\/p>\n

 The native file format       : 32-bit small endian<\/div>\n
 Memory size from command line:  1000000000<\/div>\n

<\/p>\n

 ********  notice  ********  notice  ********  notice  ********<\/div>\n
 *                                                            *<\/div>\n
 * This is the LS-DYNA Finite Element code.                   *<\/div>\n
 *                                                            *<\/div>\n
 * Neither LSTC nor the authors assume any responsibility for *<\/div>\n
 * the validity, accuracy, or applicability of any results    *<\/div>\n
 * obtained from this system. Users must verify their own     *<\/div>\n
 * results.                                                   *<\/div>\n
 *                                                            *<\/div>\n
 * LSTC endeavors to make the LS-DYNA code as complete,       *<\/div>\n
 * accurate and easy to use as possible.                      *<\/div>\n
 * Suggestions and comments are welcomed.  Please report any  *<\/div>\n
 * errors encountered in either the documentation or results  *<\/div>\n
 * immediately to LSTC through your site focus.               *<\/div>\n
 *                                                            *<\/div>\n
 * Copyright (C) 1990-2018                                    *<\/div>\n
 * by Livermore Software Technology Corp. (LSTC)              *<\/div>\n
 * All rights reserved                                        *<\/div>\n
 *                                                            *<\/div>\n
 ********  notice  ********  notice  ********  notice  ********<\/div>\n
 <\/div>\n
LSTC Environment Variables:<\/div>\n
 <\/div>\n
LSTC_LICENSE=ansys<\/div>\n
 <\/div>\n

<\/p>\n

 Beginning of keyword reader                                   09\/15\/23 15:40:54<\/div>\n
 expanding   memory to  1000000000 d         600 beginning of keyword reader<\/div>\n
 contracting memory to       21002 d         600  <\/div>\n
 expanding   memory to       81130 d     2212719  <\/div>\n
 expanding   memory to      111130 d     2212719  <\/div>\n
 expanding   memory to      171130 d     2212719  <\/div>\n
 expanding   memory to      191576 d     2212719  <\/div>\n
 expanding   memory to      212264 d     2212719  <\/div>\n
 expanding   memory to      233264 d     2212719  <\/div>\n

<\/p>\n

 Open include file: SPH_Ball_15x15x15.k<\/div>\n
 expanding   memory to      255440 d     2212719  <\/div>\n

<\/p>\n

 Open include file: SPH_Plate_90x90x30.k<\/div>\n
 expanding   memory to      277440 d     2212719  <\/div>\n
 expanding   memory to      299040 d     2212719  <\/div>\n
 expanding   memory to      320640 d     2212719  <\/div>\n
 expanding   memory to      342240 d     2212719  <\/div>\n
 expanding   memory to      363840 d     2212719  <\/div>\n
 expanding   memory to      385440 d     2212719  <\/div>\n
 expanding   memory to      407040 d     2212719  <\/div>\n
 expanding   memory to      428640 d     2212719  <\/div>\n
 expanding   memory to      450240 d     2212719  <\/div>\n
 expanding   memory to      471840 d     2212719  <\/div>\n
 expanding   memory to      493440 d     2212719  <\/div>\n
 expanding   memory to      515040 d     2212719  <\/div>\n
 expanding   memory to      536640 d     2212719  <\/div>\n
 expanding   memory to      558240 d     2212719  <\/div>\n
 expanding   memory to      579840 d     2212719  <\/div>\n
 expanding   memory to      601440 d     2212719  <\/div>\n
 expanding   memory to      623040 d     2212719  <\/div>\n
 expanding   memory to      644640 d     2212719  <\/div>\n
 expanding   memory to      666240 d     2212719  <\/div>\n
 expanding   memory to      687840 d     2212719  <\/div>\n
 expanding   memory to      709440 d     2212719  <\/div>\n
 expanding   memory to      731040 d     2212719  <\/div>\n
 expanding   memory to      752640 d     2212719  <\/div>\n
 expanding   memory to      774240 d     2212719  <\/div>\n
 expanding   memory to      795840 d     2212719  <\/div>\n
 expanding   memory to      817440 d     2212719  <\/div>\n
 expanding   memory to      839040 d     2212719  <\/div>\n
 expanding   memory to      860640 d     2212719  <\/div>\n
 expanding   memory to      882240 d     2212719  <\/div>\n
 expanding   memory to      903840 d     2212719  <\/div>\n
 expanding   memory to      925440 d     2212719  <\/div>\n
 expanding   memory to      947040 d     2212719  <\/div>\n
 expanding   memory to      968640 d     2212719  <\/div>\n
 expanding   memory to      990240 d     2212719  <\/div>\n
 expanding   memory to     1011840 d     2212719  <\/div>\n
 expanding   memory to     1033440 d     2212719  <\/div>\n
 expanding   memory to     1055040 d     2212719  <\/div>\n
 expanding   memory to     1076640 d     2212719  <\/div>\n
 expanding   memory to     1098240 d     2212719  <\/div>\n
 expanding   memory to     1119840 d     2212719  <\/div>\n
 expanding   memory to     1141440 d     2212719  <\/div>\n
 expanding   memory to     1163040 d     2212719  <\/div>\n
 expanding   memory to     1184640 d     2212719  <\/div>\n
 expanding   memory to     1206240 d     2212719  <\/div>\n
 expanding   memory to     1227840 d     2212719  <\/div>\n
 expanding   memory to     1249440 d     2212719  <\/div>\n
 expanding   memory to     1271040 d     2212719  <\/div>\n
 expanding   memory to     1292640 d     2212719  <\/div>\n
 expanding   memory to     1314240 d     2212719  <\/div>\n
 expanding   memory to     1335840 d     2212719  <\/div>\n
 expanding   memory to     1357440 d     2212719  <\/div>\n
 expanding   memory to     1379040 d     2212719  <\/div>\n
 expanding   memory to     1400640 d     2212719  <\/div>\n
 expanding   memory to     1422240 d     2212719  <\/div>\n
 expanding   memory to     1443840 d     2212719  <\/div>\n
 expanding   memory to     1465440 d     2212719  <\/div>\n
 expanding   memory to     1487040 d     2212719  <\/div>\n
 expanding   memory to     1508640 d     2212719  <\/div>\n
 expanding   memory to     1530240 d     2212719  <\/div>\n
 expanding   memory to     1551840 d     2212719  <\/div>\n
 expanding   memory to     1573440 d     2212719  <\/div>\n
 expanding   memory to     1595040 d     2212719  <\/div>\n
 expanding   memory to     1616640 d     2212719  <\/div>\n
 expanding   memory to     1638240 d     2212719  <\/div>\n
 expanding   memory to     1659840 d     2212719  <\/div>\n
 expanding   memory to     1681440 d     2212719  <\/div>\n
 expanding   memory to     1703040 d     2212719  <\/div>\n

<\/p>\n

 Open include file: MatFile_Y5_PA.k<\/div>\n
 expanding   memory to     1732040 d     2212719  <\/div>\n
 expanding   memory to     1815114 d     2212719  <\/div>\n
 expanding   memory to     1896712 d     2212719  <\/div>\n
 expanding   memory to     1978310 d     2212719  <\/div>\n
 expanding   memory to     2059908 d     2212719  <\/div>\n
 expanding   memory to     2141506 d     2212719  <\/div>\n
 expanding   memory to     2223104 d     2212719  <\/div>\n
 expanding   memory to     2639248 d     2212719  <\/div>\n
 expanding   memory to     2884040 d     2212719  <\/div>\n
 expanding   memory to     3128832 d     2212719  <\/div>\n
 expanding   memory to     5821534 d     2212719  <\/div>\n
 expanding   memory to     6066326 d     2212719  <\/div>\n
 expanding   memory to     6311118 d     2212719  <\/div>\n
 expanding   memory to     6737848 d     2212725  <\/div>\n
 expanding   memory to     7153992 d     2212725  <\/div>\n

<\/p>\n

 Memory required to process keyword     :     7153992<\/div>\n
 contracting memory to           1 d     2212725 end of keyword reader<\/div>\n

<\/p>\n

 LS-DYNA will perform a structural only analysis<\/div>\n

<\/p>\n

 Y5_PA_HV                                                                <\/div>\n
                         ls-dyna smp.123264 s           date 01\/12\/2018<\/div>\n
 expanding   memory to        2767 d         666 material, node and element data<\/div>\n
 expanding   memory to        2845 d         668 mat add general damage 0<\/div>\n
 expanding   memory to        2865 d         668 material added airbag porosity leakage<\/div>\n
 expanding   memory to        2871 d         668 material properties<\/div>\n
 expanding   memory to        2968 d      246487 element data for composite material<\/div>\n
 expanding   memory to        2982 d     8323567 gradient of damage data<\/div>\n
 expanding   memory to        3057 d     8323569 user control for contact interfaces<\/div>\n
 contracting memory to        3039 d     8323569 thermal expansion 0<\/div>\n
 expanding   memory to      247830 d     8323569 temp index array for node sorting<\/div>\n
 contracting memory to        3039 d     8568364 for boundary cond. vectorization<\/div>\n
 contracting memory to        3039 d     9057946 arbitrary element numbering input<\/div>\n
 contracting memory to        3039 d     9057946 thick shell int. pt. strain<\/div>\n
 expanding   memory to        3597 d    10281906 process element material data<\/div>\n
 expanding   memory to        5598 d    10281904 load curve data<\/div>\n
 contracting memory to        3604 d    10281904 user_define_loading_set<\/div>\n
 expanding   memory to        3804 d    10281904 regularize time history data<\/div>\n
 expanding   memory to        3808 d    10281904 *DEFINE_ELEMENT_DEATH<\/div>\n
 contracting memory to        3808 d    10281904 rigidwall definitions<\/div>\n
 expanding   memory to      248600 d    10281904 nodal constraint sets<\/div>\n
 contracting memory to        3998 d    10281904 contact interfaces<\/div>\n
 expanding   memory to      494580 d    10281904 implicit contact 1<\/div>\n
 contracting memory to        4998 d    10282008 contact segment data 1<\/div>\n
 expanding   memory to     1228953 d    10282008 contact segment data 3<\/div>\n
 contracting memory to        3998 d    14493971 contact definition<\/div>\n
 expanding   memory to      983386 d    14493971 rigid body<\/div>\n
 contracting memory to        4638 d    14493995 contact friction<\/div>\n
 expanding   memory to        4669 d    14493995 joints<\/div>\n
 expanding   memory to    35744235 d    14494595 SPH elements<\/div>\n
 expanding   memory to    36233817 d    14494595 discrete element<\/div>\n
 contracting memory to    36233817 d    14739710 accelerometers<\/div>\n
 expanding   memory to    36233917 d    14739710 rigid bodies for disp. termination<\/div>\n
 contracting memory to    36233917 d    15474083 transformation to move nodes<\/div>\n
 expanding   memory to    36233919 d    14739761 mat add cohesive 0<\/div>\n
 contracting memory to    36233919 d    14739761 sensor_control for curve<\/div>\n
 expanding   memory to    36233921 d    14739761 flexible body 2<\/div>\n
 contracting memory to    36233921 d    14739761 implicit joints<\/div>\n

<\/p>\n

 S t o r a g e   a l l o c a t i o n  <\/div>\n

<\/p>\n

 Memory required to begin solution      :      37M<\/div>\n
 Additional dynamically allocated memory:      15M<\/div>\n
                                   Total:      51M<\/div>\n
       1 t 0.0000E+00 dt 1.10E-12 flush i\/o buffers            09\/15\/23 15:41:07<\/div>\n
       1 t 0.0000E+00 dt 1.10E-12 write d3plot file            09\/15\/23 15:41:07<\/div>\n
      96 t 9.4113E-08 dt 9.41E-09 write d3plot file            09\/15\/23 15:41:58<\/div>\n
     103 t 1.8341E-07 dt 1.83E-08 write d3plot file            09\/15\/23 15:42:01<\/div>\n
     108 t 2.9539E-07 dt 2.95E-08 write d3plot file            09\/15\/23 15:42:04<\/div>\n
     111 t 3.8597E-07 dt 3.01E-08 write d3plot file            09\/15\/23 15:42:06<\/div>\n
     114 t 4.8081E-07 dt 3.33E-08 write d3plot file            09\/15\/23 15:42:08<\/div>\n
     117 t 5.8049E-07 dt 3.26E-08 write d3plot file            09\/15\/23 15:42:09<\/div>\n
     120 t 6.7355E-07 dt 3.07E-08 write d3plot file            09\/15\/23 15:42:11<\/div>\n
     123 t 7.7186E-07 dt 3.20E-08 write d3plot file            09\/15\/23 15:42:13<\/div>\n
     126 t 8.6933E-07 dt 3.56E-08 write d3plot file            09\/15\/23 15:42:15<\/div>\n
     129 t 9.7590E-07 dt 3.48E-08 write d3plot file            09\/15\/23 15:42:17<\/div>\n
     132 t 1.0795E-06 dt 3.37E-08 write d3plot file            09\/15\/23 15:42:18<\/div>\n
     135 t 1.1817E-06 dt 3.54E-08 write d3plot file            09\/15\/23 15:42:20<\/div>\n
     138 t 1.2895E-06 dt 3.64E-08 write d3plot file            09\/15\/23 15:42:22<\/div>\n
     141 t 1.3997E-06 dt 3.62E-08 write d3plot file            09\/15\/23 15:42:24<\/div>\n
     143 t 1.4717E-06 dt 3.61E-08 write d3plot file            09\/15\/23 15:42:25<\/div>\n
     146 t 1.5796E-06 dt 3.49E-08 write d3plot file            09\/15\/23 15:42:27<\/div>\n
     149 t 1.6842E-06 dt 3.46E-08 write d3plot file            09\/15\/23 15:42:29<\/div>\n
     152 t 1.7902E-06 dt 3.61E-08 write d3plot file            09\/15\/23 15:42:31<\/div>\n
 <\/div>\n
 *** Warning 40042 (SOL+42)<\/div>\n
     Part ID = 5000001 plasticity algorithm did not converge for MAT15<\/div>\n
     time = 1.8989E-06, ncycle = 154<\/div>\n
     155 t 1.8989E-06 dt 3.67E-08 write d3plot file            09\/15\/23 15:42:33<\/div>\n
 <\/div>\n
 *** Warning 40042 (SOL+42)<\/div>\n
     Part ID = 5000001 plasticity algorithm did not converge for MAT15<\/div>\n
     time = 1.9356E-06, ncycle = 155<\/div>\n
     157 t 1.9725E-06 dt 3.76E-08 write d3plot file            09\/15\/23 15:42:34<\/div>\n
     160 t 2.0818E-06 dt 3.59E-08 write d3plot file            09\/15\/23 15:42:36<\/div>\n
     163 t 2.1906E-06 dt 3.85E-08 write d3plot file            09\/15\/23 15:42:38<\/div>\n
     165 t 2.2671E-06 dt 3.78E-08 write d3plot file            09\/15\/23 15:42:40<\/div>\n
     168 t 2.3827E-06 dt 3.76E-08 write d3plot file            09\/15\/23 15:42:41<\/div>\n
     171 t 2.4913E-06 dt 3.90E-08 write d3plot file            09\/15\/23 15:42:43<\/div>\n
     173 t 2.5694E-06 dt 3.79E-08 write d3plot file            09\/15\/23 15:42:45<\/div>\n
     176 t 2.6795E-06 dt 3.31E-08 write d3plot file            09\/15\/23 15:42:47<\/div>\n
     179 t 2.7811E-06 dt 3.62E-08 write d3plot file            09\/15\/23 15:42:49<\/div>\n
     182 t 2.8865E-06 dt 3.85E-08 write d3plot file            09\/15\/23 15:42:51<\/div>\n
     184 t 2.9654E-06 dt 3.91E-08 write d3plot file            09\/15\/23 15:42:52<\/div>\n
     187 t 3.0777E-06 dt 3.68E-08 write d3plot file            09\/15\/23 15:42:55<\/div>\n
     190 t 3.1960E-06 dt 4.16E-08 write d3plot file            09\/15\/23 15:42:57<\/div>\n
 <\/div>\n
 *** Warning 40042 (SOL+42)<\/div>\n
     Part ID = 5000001 plasticity algorithm did not converge for MAT15<\/div>\n
     time = 3.2376E-06, ncycle = 190<\/div>\n
     192 t 3.2788E-06 dt 3.88E-08 write d3plot file            09\/15\/23 15:42:58<\/div>\n
     195 t 3.3979E-06 dt 3.85E-08 write d3plot file            09\/15\/23 15:43:00<\/div>\n
     197 t 3.4761E-06 dt 4.04E-08 write d3plot file            09\/15\/23 15:43:02<\/div>\n
     200 t 3.5958E-06 dt 4.16E-08 write d3plot file            09\/15\/23 15:43:04<\/div>\n
     202 t 3.6748E-06 dt 3.24E-08 write d3plot file            09\/15\/23 15:43:05<\/div>\n
     205 t 3.7821E-06 dt 4.01E-08 write d3plot file            09\/15\/23 15:43:08<\/div>\n
     208 t 3.8980E-06 dt 3.79E-08 write d3plot file            09\/15\/23 15:43:10<\/div>\n
     210 t 3.9736E-06 dt 3.74E-08 write d3plot file            09\/15\/23 15:43:11<\/div>\n
     213 t 4.0845E-06 dt 4.02E-08 write d3plot file            09\/15\/23 15:43:13<\/div>\n
     215 t 4.1662E-06 dt 4.12E-08 write d3plot file            09\/15\/23 15:43:15<\/div>\n
     218 t 4.2846E-06 dt 4.04E-08 write d3plot file            09\/15\/23 15:43:17<\/div>\n
     220 t 4.3617E-06 dt 3.91E-08 write d3plot file            09\/15\/23 15:43:18<\/div>\n
 <\/div>\n
 *** Warning 40042 (SOL+42)<\/div>\n
     Part ID = 5000001 plasticity algorithm did not converge for MAT15<\/div>\n
     time = 4.4007E-06, ncycle = 220<\/div>\n
     223 t 4.4836E-06 dt 3.87E-08 write d3plot file            09\/15\/23 15:43:21<\/div>\n
     225 t 4.5636E-06 dt 4.20E-08 write d3plot file            09\/15\/23 15:43:22<\/div>\n
     228 t 4.6917E-06 dt 4.26E-08 write d3plot file            09\/15\/23 15:43:24<\/div>\n
     230 t 4.7746E-06 dt 4.05E-08 write d3plot file            09\/15\/23 15:43:26<\/div>\n
     233 t 4.8991E-06 dt 4.24E-08 write d3plot file            09\/15\/23 15:43:28<\/div>\n
     235 t 4.9825E-06 dt 3.99E-08 write d3plot file            09\/15\/23 15:43:29<\/div>\n
     237 t 5.0618E-06 dt 3.95E-08 write d3plot file            09\/15\/23 15:43:31<\/div>\n
     240 t 5.1818E-06 dt 4.02E-08 write d3plot file            09\/15\/23 15:43:33<\/div>\n
     242 t 5.2621E-06 dt 4.03E-08 write d3plot file            09\/15\/23 15:43:35<\/div>\n
     245 t 5.3836E-06 dt 4.04E-08 write d3plot file            09\/15\/23 15:43:37<\/div>\n
     247 t 5.4663E-06 dt 4.22E-08 write d3plot file            09\/15\/23 15:43:39<\/div>\n
     250 t 5.5928E-06 dt 4.26E-08 write d3plot file            09\/15\/23 15:43:41<\/div>\n
     252 t 5.6780E-06 dt 4.16E-08 write d3plot file            09\/15\/23 15:43:42<\/div>\n
     254 t 5.7615E-06 dt 4.08E-08 write d3plot file            09\/15\/23 15:43:44<\/div>\n
     257 t 5.8819E-06 dt 4.13E-08 write d3plot file            09\/15\/23 15:43:46<\/div>\n
     259 t 5.9664E-06 dt 4.18E-08 write d3plot file            09\/15\/23 15:43:48<\/div>\n
     262 t 6.0951E-06 dt 4.30E-08 write d3plot file            09\/15\/23 15:43:50<\/div>\n
     264 t 6.1808E-06 dt 4.08E-08 write d3plot file            09\/15\/23 15:43:52<\/div>\n
     266 t 6.2609E-06 dt 4.32E-08 write d3plot file            09\/15\/23 15:43:53<\/div>\n
     269 t 6.3886E-06 dt 4.23E-08 write d3plot file            09\/15\/23 15:43:56<\/div>\n
     271 t 6.4683E-06 dt 3.99E-08 write d3plot file            09\/15\/23 15:43:57<\/div>\n
     274 t 6.5920E-06 dt 4.11E-08 write d3plot file            09\/15\/23 15:43:59<\/div>\n
     276 t 6.6769E-06 dt 4.32E-08 write d3plot file            09\/15\/23 15:44:01<\/div>\n
     278 t 6.7617E-06 dt 4.21E-08 write d3plot file            09\/15\/23 15:44:02<\/div>\n
     281 t 6.8906E-06 dt 4.39E-08 write d3plot file            09\/15\/23 15:44:05<\/div>\n
     283 t 6.9769E-06 dt 4.41E-08 write d3plot file            09\/15\/23 15:44:06<\/div>\n
     285 t 7.0638E-06 dt 4.34E-08 write d3plot file            09\/15\/23 15:44:08<\/div>\n
     288 t 7.1906E-06 dt 4.37E-08 write d3plot file            09\/15\/23 15:44:10<\/div>\n
     290 t 7.2781E-06 dt 4.24E-08 write d3plot file            09\/15\/23 15:44:11<\/div>\n
     292 t 7.3642E-06 dt 4.12E-08 write d3plot file            09\/15\/23 15:44:13<\/div>\n
     295 t 7.4925E-06 dt 4.40E-08 write d3plot file            09\/15\/23 15:44:15<\/div>\n
     297 t 7.5784E-06 dt 4.34E-08 write d3plot file            09\/15\/23 15:44:17<\/div>\n
     299 t 7.6630E-06 dt 4.21E-08 write d3plot file            09\/15\/23 15:44:18<\/div>\n
     302 t 7.7922E-06 dt 4.34E-08 write d3plot file            09\/15\/23 15:44:20<\/div>\n
     304 t 7.8801E-06 dt 4.19E-08 write d3plot file            09\/15\/23 15:44:22<\/div>\n
     306 t 7.9652E-06 dt 4.42E-08 write d3plot file            09\/15\/23 15:44:23<\/div>\n
     309 t 8.0970E-06 dt 4.45E-08 write d3plot file            09\/15\/23 15:44:26<\/div>\n
     311 t 8.1842E-06 dt 4.52E-08 write d3plot file            09\/15\/23 15:44:27<\/div>\n
     313 t 8.2732E-06 dt 4.44E-08 write d3plot file            09\/15\/23 15:44:29<\/div>\n
     315 t 8.3618E-06 dt 4.39E-08 write d3plot file            09\/15\/23 15:44:30<\/div>\n
     318 t 8.4897E-06 dt 1.07E-08 write d3plot file            09\/15\/23 15:44:33<\/div>\n
 <\/div>\n
 *** Warning 40042 (SOL+42)<\/div>\n
     Part ID = 5000001 plasticity algorithm did not converge for MAT15<\/div>\n
     time = 8.5089E-06, ncycle = 1061<\/div>\n<\/div>\n
 <\/div>\n
The message file for the successful job:<\/div>\n
\n

 <\/p>\n

 ***************************************************************
 *            ANSYS 2023 R1          LEGAL NOTICES             *
 ***************************************************************
 *                                                             *
 * Copyright 1971-2023 ANSYS, Inc.  All rights reserved.       *
 * Unauthorized use, distribution or duplication is            *
 * prohibited.                                                 *
 *                                                             *
 * Ansys is a registered trademark of ANSYS, Inc. or its       *
 * subsidiaries in the United States or other countries.       *
 * See the ANSYS, Inc. online documentation or the ANSYS, Inc. *
 * documentation CD or online help for the complete Legal      *
 * Notice.                                                     *
 *                                                             *
 ***************************************************************
 *                                                             *
 * THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION       *
 * INCLUDE TRADE SECRETS AND CONFIDENTIAL AND PROPRIETARY      *
 * PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS.    *
 * The software products and documentation are furnished by    *
 * ANSYS, Inc. or its subsidiaries under a software license    *
 * agreement that contains provisions concerning               *
 * non-disclosure, copying, length and nature of use,          *
 * compliance with exporting laws, warranties, disclaimers,    *
 * limitations of liability, and remedies, and other           *
 * provisions.  The software products and documentation may be *
 * used, disclosed, transferred, or copied only in accordance  *
 * with the terms and conditions of that software license      *
 * agreement.                                                  *
 *                                                             *
 * ANSYS, Inc. is a UL registered                              *
 * ISO 9001:2015 company.                                      *
 *                                                             *
 ***************************************************************
 *                                                             *
 * This product is subject to U.S. laws governing export and   *
 * re-export.                                                  *
 *                                                             *
 * For U.S. Government users, except as specifically granted   *
 * by the ANSYS, Inc. software license agreement, the use,     *
 * duplication, or disclosure by the United States Government  *
 * is subject to restrictions stated in the ANSYS, Inc.        *
 * software license agreement and FAR 12.212 (for non-DOD      *
 * licenses).                                                  *
 *                                                             *
 ***************************************************************<\/p>\n

      Date: 09\/19\/2023      Time: 15:42:25  
      ___________________________________________________ 
     |                                                   |
     |  LS-DYNA, A Program for Nonlinear Dynamic         |
     |  Analysis of Structures in Three Dimensions       |
     |  Date    : 11\/15\/2022    Time: 13:48:14           |
     |  Version : smp s R13                              |
     |  Revision: R13.1.1-13-g5480eca294                 |
     |                                                   |
     |  Features enabled in this version:                |
     |    Shared Memory Parallel                         |
     |    FFTW (multi-dimensional FFTW Library)          |
     |    Interactive Graphics                           |
     |    ANSYSLIC enabled                               |
     |    MADYMO indirect coupling (7.2 or higher)       |
     |                                                   |
     |  Licensed to:                                     |
     |  Issued by  : ANSYS                               |
     |                                                   |
     |  Platform   : WINDOWS X64 (SSE2)                  |
     |  OS Level   : Windows 8\/10 & Srv 2016\/2019 uam    |
     |  Compiler   : Intel Fortran XE 2019 MSVC++ 2019   |
     |  Hostname   : ENGR6321                            |
     |  Precision  : Single precision (I4R4)             |
     |                                                   |
     |  Unauthorized use infringes Ansys Inc. copyrights |
     |___________________________________________________|<\/p>\n

 Command line options: i=C:\\Users\\rji229\\Documents\\fem_sph_circular\\Test\\1\\Run.k 
                       ncpu=1 
                       memory=97m<\/p>\n

 Input file: C:\\Users\\rji229\\Documents\\fem_sph_circular\\Test\\1\\Run.k                         <\/p>\n

 The native file format       : 32-bit small endian
 Memory size from command line:    97000000
 allocating  memory to    97000000 d         544 Initial allocation<\/p>\n

 ********  notice  ********  notice  ********  notice  ********
 *                                                            *
 * This is the LS-DYNA Finite Element code.                   *
 *                                                            *
 * Neither LST nor the authors assume any responsibility for  *
 * the validity, accuracy, or applicability of any results    *
 * obtained from this system. Users must verify their own     *
 * results.                                                   *
 *                                                            *
 * LST endeavors to make the LS-DYNA code as complete,        *
 * accurate and easy to use as possible.                      *
 * Suggestions and comments are welcomed.  Please report any  *
 * errors encountered in either the documentation or results  *
 * immediately to LST through your site focus.                *
 *                                                            *
 * Copyright (C) 1990-2022                                    *
 * by Ansys, Inc.                                             *
 * All rights reserved                                        *
 *                                                            *
 ********  notice  ********  notice  ********  notice  ********<\/p>\n

 Beginning of keyword reader                                   09\/19\/23 15:42:25
 expanding   memory to       20720 d         600  
 expanding   memory to       66080 d     2212719  
 expanding   memory to       98580 d     2212719  
 expanding   memory to     1578326 d     2272719  
 expanding   memory to     1606836 d     2272719  
 expanding   memory to     1629036 d     2280719  
 expanding   memory to     1744036 d     2280719  <\/p>\n

                                                               09\/19\/23 15:42:25
 Open include file: SPH_Ball_15x15x15.k<\/p>\n

                                                               09\/19\/23 15:42:25
 Open include file: SPH_Plate_90x90x30.k<\/p>\n

                                                               09\/19\/23 15:42:25
 Open include file: MatFile_Y5_PA.k
 expanding   memory to     1765932 d     2280719  
 expanding   memory to     2012200 d     5465002  
 expanding   memory to     2256992 d     5465002  <\/p>\n

 Memory required to process keyword     :    2256992  
 Additional dynamic memory required     :    8647293  <\/p>\n

 contracting memory to           1 d     5465008 end of keyword reader<\/p>\n

 LS-DYNA will perform a structural only analysis <\/p>\n

 Y5_PA_HV                                                                
                    ls-dyna smp s R13 R13.1.1_13_5480ec date 11\/15\/2022
 expanding   memory to        2001 d        1445 material, node and element data
 expanding   memory to        2071 d        1475 material properties
 expanding   memory to        2085 d     8324474 gradient of damage data
 expanding   memory to        2107 d     8324529 user control for contact interfaces
 contracting memory to        2087 d     8324531 thermal expansion 0
 expanding   memory to        2089 d     8324533 cross-sectional force definitions 0
 expanding   memory to      246880 d     8324547 temp index array for node sorting
 contracting memory to        2089 d     8569342 just because?
 expanding   memory to        4091 d    10283422 load curve data
 contracting memory to        2097 d    10283422 user_define_loading_set
 expanding   memory to        2297 d    10283422 regularize time history data
 contracting memory to        2101 d    10283422 *DEFINE_ELEMENT_DEATH
 expanding   memory to      492683 d    10528238 implicit contact 1
 contracting memory to        3101 d    10528344 contact segment data 1
 expanding   memory to     1227056 d    10528344 contact segment data 3
 contracting memory to        2101 d    14740307 contact definition
 expanding   memory to        2105 d    14740978 contact friction
 expanding   memory to     1715702 d    37752065 SPH elements
 expanding   memory to     1715802 d    38241723 rigid bodies for disp. termination
 expanding   memory to     1715872 d    38241723 save d3plot control data<\/p>\n

 S t o r a g e   a l l o c a t i o n   <\/p>\n

 Memory required to begin solution      :    2257K
 Additional dynamically allocated memory:      41M
                                   Total:      43M
       1 t 0.0000E+00 dt 1.10E-12 flush i\/o buffers            09\/19\/23 15:42:33
       1 t 0.0000E+00 dt 1.10E-12 write d3plot file            09\/19\/23 15:42:33
      96 t 9.4113E-08 dt 9.41E-09 write d3plot file            09\/19\/23 15:43:22
     103 t 1.8341E-07 dt 1.83E-08 write d3plot file            09\/19\/23 15:43:25
     108 t 2.9539E-07 dt 2.95E-08 write d3plot file            09\/19\/23 15:43:28
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 3.9317E-07, ncycle = 110
     111 t 3.9317E-07 dt 3.66E-08 write d3plot file            09\/19\/23 15:43:30
     113 t 4.6671E-07 dt 3.96E-08 write d3plot file            09\/19\/23 15:43:31
     116 t 5.9188E-07 dt 3.95E-08 write d3plot file            09\/19\/23 15:43:33
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 6.3133E-07, ncycle = 116
     118 t 6.7157E-07 dt 4.11E-08 write d3plot file            09\/19\/23 15:43:34
     121 t 7.9410E-07 dt 4.17E-08 write d3plot file            09\/19\/23 15:43:37
     123 t 8.8038E-07 dt 4.54E-08 write d3plot file            09\/19\/23 15:43:38
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 9.2573E-07, ncycle = 123
     125 t 9.6982E-07 dt 4.65E-08 write d3plot file            09\/19\/23 15:43:40
     127 t 1.0610E-06 dt 4.36E-08 write d3plot file            09\/19\/23 15:43:42
     130 t 1.1918E-06 dt 4.53E-08 write d3plot file            09\/19\/23 15:43:44
     132 t 1.2849E-06 dt 4.77E-08 write d3plot file            09\/19\/23 15:43:46
     134 t 1.3799E-06 dt 4.74E-08 write d3plot file            09\/19\/23 15:43:48
     136 t 1.4746E-06 dt 4.63E-08 write d3plot file            09\/19\/23 15:43:50
     138 t 1.5663E-06 dt 4.43E-08 write d3plot file            09\/19\/23 15:43:51
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 1.6532E-06, ncycle = 139
     140 t 1.6532E-06 dt 4.69E-08 write d3plot file            09\/19\/23 15:43:53
     143 t 1.7969E-06 dt 4.83E-08 write d3plot file            09\/19\/23 15:43:56
     145 t 1.8806E-06 dt 3.90E-08 write d3plot file            09\/19\/23 15:43:57
     147 t 1.9626E-06 dt 4.46E-08 write d3plot file            09\/19\/23 15:43:59
     150 t 2.0788E-06 dt 3.60E-08 write d3plot file            09\/19\/23 15:44:02
     153 t 2.1979E-06 dt 4.44E-08 write d3plot file            09\/19\/23 15:44:05
     155 t 2.2817E-06 dt 3.75E-08 write d3plot file            09\/19\/23 15:44:06
     158 t 2.3922E-06 dt 3.80E-08 write d3plot file            09\/19\/23 15:44:09
     160 t 2.4720E-06 dt 4.60E-08 write d3plot file            09\/19\/23 15:44:11
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 2.5625E-06, ncycle = 161
     162 t 2.5625E-06 dt 3.95E-08 write d3plot file            09\/19\/23 15:44:13
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 2.6020E-06, ncycle = 162
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 2.6867E-06, ncycle = 164
     165 t 2.6867E-06 dt 4.71E-08 write d3plot file            09\/19\/23 15:44:15
     167 t 2.7825E-06 dt 4.80E-08 write d3plot file            09\/19\/23 15:44:17
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 2.8306E-06, ncycle = 167
     169 t 2.8726E-06 dt 3.94E-08 write d3plot file            09\/19\/23 15:44:19
     171 t 2.9541E-06 dt 4.63E-08 write d3plot file            09\/19\/23 15:44:21
     174 t 3.0939E-06 dt 4.62E-08 write d3plot file            09\/19\/23 15:44:24
     176 t 3.1808E-06 dt 4.38E-08 write d3plot file            09\/19\/23 15:44:26
     178 t 3.2728E-06 dt 4.89E-08 write d3plot file            09\/19\/23 15:44:28
     180 t 3.3658E-06 dt 4.24E-08 write d3plot file            09\/19\/23 15:44:30
     183 t 3.4967E-06 dt 4.81E-08 write d3plot file            09\/19\/23 15:44:33
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 3.5926E-06, ncycle = 184
     185 t 3.5926E-06 dt 4.22E-08 write d3plot file            09\/19\/23 15:44:35
     187 t 3.6749E-06 dt 4.20E-08 write d3plot file            09\/19\/23 15:44:37
     189 t 3.7631E-06 dt 4.85E-08 write d3plot file            09\/19\/23 15:44:39
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 3.8117E-06, ncycle = 189
     191 t 3.8592E-06 dt 4.25E-08 write d3plot file            09\/19\/23 15:44:41
     194 t 3.9923E-06 dt 4.82E-08 write d3plot file            09\/19\/23 15:44:43
     196 t 4.0878E-06 dt 4.72E-08 write d3plot file            09\/19\/23 15:44:45
     198 t 4.1826E-06 dt 4.38E-08 write d3plot file            09\/19\/23 15:44:47
     200 t 4.2747E-06 dt 4.86E-08 write d3plot file            09\/19\/23 15:44:49
     202 t 4.3722E-06 dt 4.90E-08 write d3plot file            09\/19\/23 15:44:51
     204 t 4.4688E-06 dt 4.47E-08 write d3plot file            09\/19\/23 15:44:53
     206 t 4.5568E-06 dt 4.54E-08 write d3plot file            09\/19\/23 15:44:55
     209 t 4.6991E-06 dt 4.69E-08 write d3plot file            09\/19\/23 15:44:58
     211 t 4.7946E-06 dt 4.44E-08 write d3plot file            09\/19\/23 15:45:00
     213 t 4.8792E-06 dt 4.17E-08 write d3plot file            09\/19\/23 15:45:01
     215 t 4.9669E-06 dt 4.79E-08 write d3plot file            09\/19\/23 15:45:04
     217 t 5.0629E-06 dt 4.76E-08 write d3plot file            09\/19\/23 15:45:06
     220 t 5.1926E-06 dt 4.49E-08 write d3plot file            09\/19\/23 15:45:09
     222 t 5.2864E-06 dt 4.41E-08 write d3plot file            09\/19\/23 15:45:11
     224 t 5.3770E-06 dt 4.62E-08 write d3plot file            09\/19\/23 15:45:13
     226 t 5.4674E-06 dt 4.83E-08 write d3plot file            09\/19\/23 15:45:15
     228 t 5.5637E-06 dt 4.82E-08 write d3plot file            09\/19\/23 15:45:17
     230 t 5.6554E-06 dt 4.69E-08 write d3plot file            09\/19\/23 15:45:19
     233 t 5.7966E-06 dt 4.41E-08 write d3plot file            09\/19\/23 15:45:22
     235 t 5.8892E-06 dt 4.64E-08 write d3plot file            09\/19\/23 15:45:24
     237 t 5.9818E-06 dt 4.82E-08 write d3plot file            09\/19\/23 15:45:25
     239 t 6.0788E-06 dt 4.88E-08 write d3plot file            09\/19\/23 15:45:27
     241 t 6.1725E-06 dt 4.63E-08 write d3plot file            09\/19\/23 15:45:28
     243 t 6.2657E-06 dt 4.86E-08 write d3plot file            09\/19\/23 15:45:30
     245 t 6.3630E-06 dt 4.79E-08 write d3plot file            09\/19\/23 15:45:31
     247 t 6.4585E-06 dt 4.50E-08 write d3plot file            09\/19\/23 15:45:33
     250 t 6.5981E-06 dt 4.74E-08 write d3plot file            09\/19\/23 15:45:35
     252 t 6.6944E-06 dt 4.91E-08 write d3plot file            09\/19\/23 15:45:36
     254 t 6.7913E-06 dt 4.90E-08 write d3plot file            09\/19\/23 15:45:38
     256 t 6.8895E-06 dt 4.78E-08 write d3plot file            09\/19\/23 15:45:40
     258 t 6.9860E-06 dt 4.74E-08 write d3plot file            09\/19\/23 15:45:41
     260 t 7.0814E-06 dt 4.89E-08 write d3plot file            09\/19\/23 15:45:43
     262 t 7.1792E-06 dt 4.88E-08 write d3plot file            09\/19\/23 15:45:44
     264 t 7.2768E-06 dt 4.78E-08 write d3plot file            09\/19\/23 15:45:46
     266 t 7.3730E-06 dt 4.87E-08 write d3plot file            09\/19\/23 15:45:47
     268 t 7.4703E-06 dt 4.86E-08 write d3plot file            09\/19\/23 15:45:49
     270 t 7.5675E-06 dt 4.86E-08 write d3plot file            09\/19\/23 15:45:50
     272 t 7.6649E-06 dt 4.66E-08 write d3plot file            09\/19\/23 15:45:52
     274 t 7.7580E-06 dt 4.66E-08 write d3plot file            09\/19\/23 15:45:53
     277 t 7.8993E-06 dt 4.65E-08 write d3plot file            09\/19\/23 15:45:56
     279 t 7.9947E-06 dt 4.85E-08 write d3plot file            09\/19\/23 15:45:57
     281 t 8.0890E-06 dt 4.70E-08 write d3plot file            09\/19\/23 15:45:59
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 8.1844E-06, ncycle = 282
     283 t 8.1844E-06 dt 4.86E-08 write d3plot file            09\/19\/23 15:46:01
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 8.2330E-06, ncycle = 283
     285 t 8.2819E-06 dt 4.88E-08 write d3plot file            09\/19\/23 15:46:02
     287 t 8.3787E-06 dt 4.88E-08 write d3plot file            09\/19\/23 15:46:04
     289 t 8.4710E-06 dt 4.78E-08 write d3plot file            09\/19\/23 15:46:05
     291 t 8.5661E-06 dt 4.87E-08 write d3plot file            09\/19\/23 15:46:07
     293 t 8.6636E-06 dt 4.89E-08 write d3plot file            09\/19\/23 15:46:08
     295 t 8.7594E-06 dt 4.79E-08 write d3plot file            09\/19\/23 15:46:10
     297 t 8.8559E-06 dt 4.85E-08 write d3plot file            09\/19\/23 15:46:11
     299 t 8.9530E-06 dt 4.84E-08 write d3plot file            09\/19\/23 15:46:13
     302 t 9.0990E-06 dt 4.87E-08 write d3plot file            09\/19\/23 15:46:15
     304 t 9.1965E-06 dt 4.56E-08 write d3plot file            09\/19\/23 15:46:17
     306 t 9.2881E-06 dt 4.69E-08 write d3plot file            09\/19\/23 15:46:18
     308 t 9.3827E-06 dt 4.90E-08 write d3plot file            09\/19\/23 15:46:20
     310 t 9.4806E-06 dt 4.82E-08 write d3plot file            09\/19\/23 15:46:21
     312 t 9.5729E-06 dt 4.67E-08 write d3plot file            09\/19\/23 15:46:23
     314 t 9.6638E-06 dt 4.66E-08 write d3plot file            09\/19\/23 15:46:24
     316 t 9.7579E-06 dt 4.85E-08 write d3plot file            09\/19\/23 15:46:26
 
 *** Warning 40042 (SOL+42)
     Part ID = 5000001 plasticity algorithm did not converge for MAT15
     time = 9.8512E-06, ncycle = 317
     319 t 9.8980E-06 dt 4.36E-08 write d3plot file            09\/19\/23 15:46:28
     321 t 9.9851E-06 dt 4.78E-08 write d3plot file            09\/19\/23 15:46:30
 
 *** termination time reached ***
     321 t 1.0033E-05 dt 4.78E-08 write d3dump01 file          09\/19\/23 15:46:30
     321 t 1.0033E-05 dt 4.78E-08 write d3plot file            09\/19\/23 15:46:30<\/p>\n

 N o r m a l    t e r m i n a t i o n                          09\/19\/23 15:46:30<\/p>\n

 S t o r a g e   a l l o c a t i o n   <\/p>\n

 Memory required to complete solution   :    2257K
 Additional dynamically allocated memory:     150M
                                   Total:     152M<\/p>\n

 T i m i n g   i n f o r m a t i o n
                        CPU(seconds)   %CPU  Clock(seconds) %Clock
  —————————————————————-
  Keyword Processing … 1.0000E+00    0.41     4.9200E-01    0.20
    KW Reading ……… 1.0000E+00    0.41     3.3300E-01    0.14
    KW Writing ……… 0.0000E+00    0.00     3.1000E-02    0.01
  Initialization ……. 8.0000E+00    3.25     8.7360E+00    3.54
    Init Proc Phase 1 .. 7.0000E+00    2.85     7.0600E+00    2.86
    Init Proc Phase 2 .. 0.0000E+00    0.00     1.9000E-02    0.01
  Element processing … 2.3200E+02   94.31     2.2922E+02   93.01
    SPH ……………. 2.3200E+02   94.31     2.2922E+02   93.01
  Binary databases ….. 5.0000E+00    2.03     7.2970E+00    2.96
  ASCII database ……. 0.0000E+00    0.00     2.8000E-02    0.01
  Time step size ……. 0.0000E+00    0.00     1.5000E-02    0.01
  Others …………… 0.0000E+00    0.00     5.0000E-03    0.00
  Misc. 1 ………….. 0.0000E+00    0.00     6.8000E-02    0.03
    Force to Accel ….. 0.0000E+00    0.00     6.6000E-02    0.03
  Misc. 2 ………….. 0.0000E+00    0.00     3.7300E-01    0.15
  Misc. 3 ………….. 0.0000E+00    0.00     1.7500E-01    0.07
  Misc. 4 ………….. 0.0000E+00    0.00     4.3000E-02    0.02
    Timestep Init …… 0.0000E+00    0.00     4.3000E-02    0.02
  —————————————————————-
  T o t a l s            2.4600E+02  100.00     2.4645E+02  100.00<\/p>\n

 Problem time       =    1.0033E-05
 Problem cycle      =       321
 Total CPU time     =       246 seconds (   0 hours  4 minutes  6 seconds)
 CPU time per zone cycle  =       3016.115 nanoseconds
 Clock time per zone cycle=       3018.953 nanoseconds<\/p>\n

 Number of CPU’s    1
 NLQ used\/max     136\/  136
 Start time   09\/19\/2023 15:42:25  
 End time     09\/19\/2023 15:46:30  
 Elapsed time     245 seconds for     321 cycles using  1 SMP thread 
             (      0 hour   4 minutes  5 seconds)<\/p>\n

 N o r m a l    t e r m i n a t i o n                          09\/19\/23 15:46:30<\/p>\n<\/div>\n

 <\/p>\n","protected":false},"template":"","class_list":["post-307500","topic","type-topic","status-closed","hentry"],"aioseo_notices":[],"acf":[],"custom_fields":[{"0":{"_bbp_author_ip":["23.206.193.146"],"_bbp_subscription":["22672","290865"],"_wp_old_date":["2023-09-19"],"_btv_view_count":["1324"],"_bbp_topic_status":["unanswered"],"_bbp_status":["publish"],"_bbp_topic_id":["307500"],"_bbp_forum_id":["27814"],"_bbp_engagement":["22672","290865"],"_bbp_voice_count":["2"],"_bbp_reply_count":["1"],"_bbp_last_reply_id":["307906"],"_bbp_last_active_id":["307906"],"_bbp_last_active_time":["2023-09-21 14:26:48"]},"test":"rji229uky-edu"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics\/307500","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics\/307500\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/media?parent=307500"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}