![\"\"](\"\/forum\/wp-content\/uploads\/sites\/2\/2023\/08\/29-08-2023-1693298698-ansys_question1.png\")
<\/a><\/p>\nHi there, I am doing stamping forming simulation using LS-DYNA and LS-PrePost.<\/p>\n
In LS-PrePost-FLD Tool, to get the graph, there are some input values.<\/p>\n
And I want to know if i can change this values and then the fld graph thus obtained is valid.<\/p>\n
Originally, there is preset values if run fld tool first, but i have changed some values and i want to know i can do like this when i write paper.<\/p>\n
Specifically, I use material “sts304”, and as the input value change, the shape of fld graph change.<\/p>\n
Then, various graph occurs to one material. It is supposed to do like this?<\/p>\n
And if the graph from changed values(from ls-dyna preset values), that values can be set by my own accord or i have to find reference paper?<\/p>\n
I tried to find many fld and stamping paper, but failed to clearly find what i want.<\/p>\n
And, the reason i want to change the value is, as i think, the fld from preset value does not reflect wrinkling well.<\/p>\n
So i changed the values to show the wrinkling well.<\/p>\n
So, i will be very appreciated if you let me know if i can changed the fld values(i set the standard such as margin, allowable thinning..) in my own accord or i have to find the reference paper.<\/p>\n