So Im running a simulation on a wing with wash out, when loading the journal file and checking the boundary conditions, inlet and outlet are not set as per the journal file. However, when I directly copy the journal file into the fluent console (Ctrl + C\/V) then enter, the boundaries are set. leading me to believe it is not an error with the code line itself, as it works in the console.<\/p>\n
Why does it not registered from the journal file?<\/p>\n
; READING MESH FILE
; Read mesh file (change the name according to your case)
\/rc w02-559976.msh
; ENERGY MODEL
; Enable energy model and viscous heating
\/define\/models\/energy y n n n y
; TURBULENCE MODEL
; Enable kw-SST turbulence model
\/define\/models\/viscous\/kw-sst y
; MATERIALS PROPERTIES
; Define air properties
\/define\/materials\/change-create\/air\/air y incompressible-ideal-gas n n n n n n
; CELL ZONE CONDITIONS
; Set operating pressure to 86884 Pa
\/define\/operating-conditions\/operating-pressure 86884.9682 q q
; BOUNDARY CONDITIONS
; Set temperature to 275.65K for pressure outlets
\/define\/boundary-conditions\/set\/pressure-outlet\/farfield outlet () t0 n 275.65 q q q
; Set the temperature to 275.65K, the velocity to 113 m\/s and the corresponding angles of attack in the velocity inlet
; WARNING: be careful to the axis of the model mesh and change the velocity components (x,y,z) accordingly
\/define\/boundary-conditions\/velocity-inlet\/inlet y y n 113.17 n 0 y n 0.99993 n 0.01220 n 0 n 275.65 n n y 5 10
; MONITORS
; Remove the residuals plot
\/solve\/monitors\/residual\/plot n q
; Set convergence criteria to 1e-03
\/solve\/monitors\/residual\/convergence-criteria 1e-03 1e-03 1e-03 1e-03 1e-03 1e-03 1e-03
; CALCULATIONS
; Run simulations for each speed and write the data file
; Adapt the number of iterations and the name of the written data file to your case
\/solve\/init\/init
\/solve\/iter\/500<\/pre>\n<\/p>\n
but if i copy this line and hit enter it accepts it><\/p>\n
<\/p>\n
\/define\/boundary-conditions\/velocity-inlet\/inlet y y n 113.17 n 0 y n 0.99993 n 0.01220 n 0 n 275.65 n n y 5 10<\/pre>\n","protected":false},"template":"","class_list":["post-282405","topic","type-topic","status-closed","hentry"],"aioseo_notices":[],"aioseo_head":"\n\t\t\n\t\n\t\n\t\n\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t\n\t\t