{"id":247516,"date":"2023-01-26T05:54:10","date_gmt":"2023-01-26T05:54:10","guid":{"rendered":"\/forum\/forums\/topic\/transient-thermal-simulation-using-moving-heat-source-but-only-1-data-calculated\/"},"modified":"2023-01-26T05:54:10","modified_gmt":"2023-01-26T05:54:10","slug":"transient-thermal-simulation-using-moving-heat-source-but-only-1-data-calculated","status":"closed","type":"topic","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/topic\/transient-thermal-simulation-using-moving-heat-source-but-only-1-data-calculated\/","title":{"rendered":"Transient thermal simulation using moving heat source but only 1 data calculated"},"content":{"rendered":"
Question 1. When using 2 Moving Heat Flux at the same time, only 1 can be used.<\/p>\n

It doesn’t make any sense. I’m not sure why<\/p><\/div>\n

 <\/div>\n
<\/p>\n

Question 2. In addition, errors and warnings appeared in the solution information.<\/p><\/div>\n

 <\/div>\n
<\/div>\n
 <\/div>\n
Question 3. I heard that the heat source of the moving heat source is Gaussian, is that correct?<\/div>\n
 <\/div>\n
Question 4. Can I put the value of 20mm\/s as a -value to reverse the direction of the moving heat source? If not, please tell me how to specify directionality<\/div>\n
 <\/div>\n
please tell me as detail as possible<\/div>\n
 <\/div>\n
thanks your help<\/div>\n

 <\/p>\n

Solver Output<\/p>\n

 Ansys Mechanical Enterprise Academic Student      <\/p>\n

 *——————————————————————*
 |                                                                  |
 |   W E L C O M E   T O   T H E   A N S Y S (R)  P R O G R A M     |
 |                                                                  |
 *——————————————————————*<\/p>\n

 <\/p>\n

 ***************************************************************
 *         ANSYS MAPDL 2023 R1          LEGAL NOTICES          *
 ***************************************************************
 *                                                             *
 * Copyright 1971-2023 Ansys, Inc.  All rights reserved.       *
 * Unauthorized use, distribution or duplication is            *
 * prohibited.                                                 *
 *                                                             *
 * Ansys is a registered trademark of Ansys, Inc. or its       *
 * subsidiaries in the United States or other countries.       *
 * See the Ansys, Inc. online documentation or the Ansys, Inc. *
 * documentation CD or online help for the complete Legal      *
 * Notice.                                                     *
 *                                                             *
 ***************************************************************
 *                                                             *
 * THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION       *
 * INCLUDE TRADE SECRETS AND CONFIDENTIAL AND PROPRIETARY      *
 * PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS.    *
 * The software products and documentation are furnished by    *
 * Ansys, Inc. or its subsidiaries under a software license    *
 * agreement that contains provisions concerning               *
 * non-disclosure, copying, length and nature of use,          *
 * compliance with exporting laws, warranties, disclaimers,    *
 * limitations of liability, and remedies, and other           *
 * provisions.  The software products and documentation may be *
 * used, disclosed, transferred, or copied only in accordance  *
 * with the terms and conditions of that software license      *
 * agreement.                                                  *
 *                                                             *
 * Ansys, Inc. is a UL registered                              *
 * ISO 9001:2015 company.                                      *
 *                                                             *
 ***************************************************************
 *                                                             *
 * This product is subject to U.S. laws governing export and   *
 * re-export.                                                  *
 *                                                             *
 * For U.S. Government users, except as specifically granted   *
 * by the Ansys, Inc. software license agreement, the use,     *
 * duplication, or disclosure by the United States Government  *
 * is subject to restrictions stated in the Ansys, Inc.        *
 * software license agreement and FAR 12.212 (for non-DOD      *
 * licenses).                                                  *
 *                                                             *
 ***************************************************************<\/p>\n

 2023 R1 
     
 Point Releases and Patches installed:   
     
 Discovery 2023 R1   
 Autodyn 2023 R1 
 SpaceClaim 2023 R1  
 CFX (includes CFD-Post) 2023 R1 
 Chemkin 2023 R1 
 EnSight 2023 R1 
 FENSAP-ICE 2023 R1  
 Fluent (includes CFD-Post) 2023 R1  
 Polyflow (includes CFD-Post) 2023 R1
 Forte (includes EnSight) 2023 R1
 TurboGrid 2023 R1   
 Aqwa 2023 R1
 Speos 2023 R1   
 Mechanical Products 2023 R1 
 Material Calibration App 2023 R1
 ACIS Geometry Interface 2023 R1 
 AutoCAD Geometry Interface 2023 R1  
 Catia, Version 4 Geometry Interface 2023 R1 
 Catia, Version 5 Geometry Interface 2023 R1 
 Catia, Version 6 Geometry Interface 2023 R1 
 Creo Elements\/Direct Modeling Geometry Interface 2023 R1
 Creo Parametric Geometry Interface 2023 R1  
 Inventor Geometry Interface 2023 R1 
 JTOpen Geometry Interface 2023 R1   
 NX Geometry Interface 2023 R1   
 Parasolid Geometry Interface  2023 R1   
 Solid Edge Geometry Interface 2023 R1   
 SOLIDWORKS Geometry Interface 2023 R1   
 Academic Student 2023 R1<\/p>\n

          *****  MAPDL COMMAND LINE ARGUMENTS  *****
  BATCH MODE REQUESTED (-b)    = NOLIST
  INPUT FILE COPY MODE (-c)    = COPY
  DISTRIBUTED MEMORY PARALLEL REQUESTED
       4 PARALLEL PROCESSES REQUESTED WITH SINGLE THREAD PER PROCESS
    TOTAL OF     4 CORES REQUESTED
  INPUT FILE NAME              = C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\_ProjectScratch\\ScrE60B\\dummy.dat
  OUTPUT FILE NAME             = C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\_ProjectScratch\\ScrE60B\\solve.out
  START-UP FILE MODE           = NOREAD
  STOP FILE MODE               = NOREAD<\/p>\n

 RELEASE= 2023 R1              BUILD= 23.1      UP20221128   VERSION=WINDOWS x64 
 CURRENT JOBNAME=file0  14:13:59  JAN 26, 2023 CP=      0.047<\/p>\n

 PARAMETER _DS_PROGRESS =     999.0000000    <\/p>\n

 \/INPUT FILE= ds.dat  LINE=       0<\/p>\n

 <\/p>\n

 *** NOTE ***                            CP =       0.109   TIME= 14:14:00
 The \/CONFIG,NOELDB command is not valid in a distributed memory         
 parallel solution.  Command is ignored.                                 <\/p>\n

 *GET  _WALLSTRT  FROM  ACTI  ITEM=TIME WALL  VALUE=  14.2333333    <\/p>\n

 TITLE= 
 wbnew–Transient Thermal (A5)                                                 <\/p>\n

  ACT Extensions:
      MovingHeat, 4.1
      dc7b91d1-0fd6-439f-811e-316ced903703, wbex
 \/COM,     LSDYNA, 2023.1
      5f463412-bd3e-484b-87e7-cbc0a665e474, wbex
 \/COM,     ANSYSMotion, 2023.1
      20180725-3f81-49eb-9f31-41364844c769, wbex
  <\/p>\n

 SET PARAMETER DIMENSIONS ON  _WB_PROJECTSCRATCH_DIR
  TYPE=STRI  DIMENSIONS=      248        1        1<\/p>\n

 PARAMETER _WB_PROJECTSCRATCH_DIR(1) = C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\_ProjectScratch\\ScrE60B\\<\/p>\n

 SET PARAMETER DIMENSIONS ON  _WB_SOLVERFILES_DIR
  TYPE=STRI  DIMENSIONS=      248        1        1<\/p>\n

 PARAMETER _WB_SOLVERFILES_DIR(1) = C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\wbnew_files\\dp0\\SYS\\MECH\\<\/p>\n

 SET PARAMETER DIMENSIONS ON  _WB_USERFILES_DIR
  TYPE=STRI  DIMENSIONS=      248        1        1<\/p>\n

 PARAMETER _WB_USERFILES_DIR(1) = C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\wbnew_files\\user_files\\
 — Data in consistent NMM units. See Solving Units in the help system for more<\/p>\n

 MPA UNITS SPECIFIED FOR INTERNAL    
  LENGTH      = MILLIMETERS (mm)
  MASS        = TONNE (Mg)
  TIME        = SECONDS (sec)
  TEMPERATURE = CELSIUS (C)
  TOFFSET     = 273.0
  FORCE       = NEWTON (N)
  HEAT        = MILLIJOULES (mJ)<\/p>\n

 INPUT  UNITS ARE ALSO SET TO MPA <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:00  JAN 26, 2023 CP=      0.141<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

          ***** MAPDL ANALYSIS DEFINITION (PREP7) *****
 *********** Nodes for the whole assembly ***********
 *********** Elements for Body 1 “SYS\\Solid” ***********
 *********** Send User Defined Coordinate System(s) ***********
 *********** Send Materials ***********
 *********** Create “Convection” ***********
 ***************** Define Uniform Initial temperature ***************<\/p>\n

 ***** ROUTINE COMPLETED *****  CP =         0.203<\/p>\n

 — Number of total nodes = 24107
 — Number of contact elements = 4980
 — Number of spring elements = 0
 — Number of bearing elements = 0
 — Number of solid elements = 14212
 — Number of condensed parts = 0
 — Number of total elements = 19192<\/p>\n

 *GET  _WALLBSOL  FROM  ACTI  ITEM=TIME WALL  VALUE=  14.2333333    
 ****************************************************************************
 *************************    SOLUTION       ********************************
 ****************************************************************************<\/p>\n

 *****  MAPDL SOLUTION ROUTINE  *****<\/p>\n

 PERFORM A TRANSIENT ANALYSIS
  THIS WILL BE A NEW ANALYSIS<\/p>\n

 STEP BOUNDARY CONDITION KEY= 1<\/p>\n

 CONTACT INFORMATION PRINTOUT LEVEL       1<\/p>\n

 DO NOT SAVE ANY RESTART FILES AT ALL<\/p>\n

 DO NOT COMBINE ELEMENT MATRIX FILES (.emat) AFTER DISTRIBUTED PARALLEL SOLUTION<\/p>\n

 DO NOT COMBINE ELEMENT SAVE DATA FILES (.esav) AFTER DISTRIBUTED PARALLEL SOLUTION<\/p>\n

 Use Quasi-Linear Thermal Transient Solution
   Tolerance for Reform of Thermal Matrix=     0.050
   ***** Fast Property Table Information *****
    Number of entries per property=    64
    Minimum temperature =      0.00
    Maximum temperature =   1000.00
  Enable multipass algorithm<\/p>\n

 *** WARNING ***                         CP =       0.203   TIME= 14:14:00
 Temperature-dependent properties have not been specified.  The          
 THOPT,QUASI option does not perform equilibrium iterations.  Small      
 time steps may be required to obtain accurate results.                  <\/p>\n

 NLHIST: ADDED NODAL RESULTS HISTORY FOR:
       NAME = MAX_TEMP                        
  ITEM\/COMP = TEMPMAX 
       NODE =         0<\/p>\n

 NLHIST: ADDED NODAL RESULTS HISTORY FOR:
       NAME = MIN_TEMP                        
  ITEM\/COMP = TEMPMIN 
       NODE =         0
 ********* Initial Time Increment Check And Fourier Modulus *********
  Specified Initial Time Increment: 0.1
  Estimated Increment Needed, le*le\/alpha, Body 1: 0.0131295
 ****************************************************
 ******************* SOLVE FOR LS 1 OF 1 ****************<\/p>\n

 SELECT       FOR ITEM=TYPE COMPONENT=    
  IN RANGE         2 TO          2 STEP          1<\/p>\n

       4980  ELEMENTS (OF      19192  DEFINED) SELECTED BY  ESEL  COMMAND.<\/p>\n

 SELECT      ALL NODES HAVING ANY ELEMENT IN ELEMENT SET.<\/p>\n

       9962 NODES (OF      24107  DEFINED) SELECTED FROM
     4980 SELECTED ELEMENTS BY NSLE COMMAND.<\/p>\n

 GENERATE SURFACE LOAD CONV ON SURFACE DEFINED BY ALL SELECTED NODES
 VALUES=_CONVVARI35  22.0000000    <\/p>\n

 NUMBER OF CONV ELEMENT FACE LOADS STORED =       4980<\/p>\n

 ALL SELECT   FOR ITEM=NODE COMPONENT=    
  IN RANGE         1 TO      24107 STEP          1<\/p>\n

      24107  NODES (OF      24107  DEFINED) SELECTED BY NSEL  COMMAND.<\/p>\n

 ALL SELECT   FOR ITEM=ELEM COMPONENT=    
  IN RANGE         1 TO      24172 STEP          1<\/p>\n

      19192  ELEMENTS (OF      19192  DEFINED) SELECTED BY  ESEL  COMMAND.<\/p>\n

 PRINTOUT RESUMED BY \/GOP<\/p>\n

 USE AUTOMATIC TIME STEPPING THIS LOAD STEP<\/p>\n

 USE INITIAL TIME STEP SIZE OF 0.1000000     FOR ALL  DEGREES OF FREEDOM
 FOR AUTOMATIC TIME STEPPING:
   USE 0.1000000E-01 AS THE MINIMUM TIME STEP SIZE
   USE 0.1000000     AS THE MAXIMUM TIME STEP SIZE<\/p>\n

 TIME=  4.0000    <\/p>\n

 INCLUDE TRANSIENT EFFECTS FOR  ALL DEGREES OF FREEDOM THIS LOAD STEP<\/p>\n

 ERASE THE CURRENT DATABASE OUTPUT CONTROL TABLE.<\/p>\n

 WRITE ALL  ITEMS TO THE DATABASE WITH A FREQUENCY OF NONE
   FOR ALL APPLICABLE ENTITIES<\/p>\n

 WRITE NSOL ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL 
   FOR ALL APPLICABLE ENTITIES<\/p>\n

 WRITE RSOL ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL 
   FOR ALL APPLICABLE ENTITIES<\/p>\n

 WRITE EANG ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL 
   FOR ALL APPLICABLE ENTITIES<\/p>\n

 WRITE VENG ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL 
   FOR ALL APPLICABLE ENTITIES<\/p>\n

 WRITE FFLU ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL 
   FOR ALL APPLICABLE ENTITIES<\/p>\n

 WRITE CONT ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL 
   FOR ALL APPLICABLE ENTITIES<\/p>\n

 PRINTOUT RESUMED BY \/GOP<\/p>\n

 WRITE MISC ITEMS TO THE DATABASE WITH A FREQUENCY OF ALL 
   FOR THE ENTITIES DEFINED BY COMPONENT _ELMISC <\/p>\n

 CONVERGENCE ON HEAT BASED ON THE NORM OF THE N-R LOAD
   WITH A TOLERANCE OF 0.1000E-02 AND A MINIMUM REFERENCE VALUE OF 0.1000E-02
   USING THE L2 NORM (CHECK THE SRSS VALUE)
  
 *********** Moving Heat Flux: Moving Heat Flux ***********
  <\/p>\n

 FINISH SOLUTION PROCESSING<\/p>\n

 ***** ROUTINE COMPLETED *****  CP =         0.219<\/p>\n

 <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:00  JAN 26, 2023 CP=      0.219<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

          ***** MAPDL ANALYSIS DEFINITION (PREP7) *****
 CMBLOCK read of NODE component FACE1     completed
 CMBLOCK read of NODE component PATH1     completed
 CMBLOCK read of NODE component START1    completed
 You have already entered the general preprocessor (PREP7).              <\/p>\n

 SELECT ALL ENTITIES OF TYPE= ALL  AND BELOW<\/p>\n

 PARAMETER INX =     1.000000000    <\/p>\n

 PARAMETER LSTP =     200.0000000    <\/p>\n

 PARAMETER VEL =     20.00000000    <\/p>\n

 PARAMETER SEG =     201.0000000    <\/p>\n

 PARAMETER R1 =     1.600000000    <\/p>\n

 PARAMETER LD =     156250.0000    <\/p>\n

 PARAMETER TM_L =     2.000000000    <\/p>\n

 PARAMETER TM_S =     0.000000000    <\/p>\n

 PARAMETER FP = Yes     <\/p>\n

 *IF  FP                                ( = Yes              )  EQ  
      Yes                               ( = Yes              )  THEN    <\/p>\n

 OPENED FILE= INDEX1.TXT FOR COMMAND FILE DATA <\/p>\n

  COMMAND FILE CLOSED <\/p>\n

 OPENED FILE= VELOCITY1.TXT FOR COMMAND FILE DATA <\/p>\n

  COMMAND FILE CLOSED <\/p>\n

 OPENED FILE= LSTP1.TXT FOR COMMAND FILE DATA <\/p>\n

  COMMAND FILE CLOSED <\/p>\n

 OPENED FILE= CON1.TXT FOR COMMAND FILE DATA <\/p>\n

  COMMAND FILE CLOSED <\/p>\n

 OPENED FILE= LD1.TXT FOR COMMAND FILE DATA <\/p>\n

  COMMAND FILE CLOSED <\/p>\n

 OPENED FILE= TMST1.TXT FOR COMMAND FILE DATA <\/p>\n

  COMMAND FILE CLOSED <\/p>\n

 OPENED FILE= TMLT1.TXT FOR COMMAND FILE DATA <\/p>\n

  COMMAND FILE CLOSED <\/p>\n

 *ELSEIF  FP                                ( = Yes              )  EQ  
          No                                ( = No               )  THEN    <\/p>\n

 *ELSE<\/p>\n

 *ENDIF<\/p>\n

 PARAMETER NLINE    =         1.000000<\/p>\n

 SET PARAMETER DIMENSIONS ON  INDEX TYPE=ARRA  DIMENSIONS=     1     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  VELOCITY TYPE=ARRA  DIMENSIONS=     1     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  LSTP TYPE=ARRA  DIMENSIONS=     1     1     1<\/p>\n

 *** WARNING ***                         CP =       0.219   TIME= 14:14:00
 Parameter LSTP already exists.  It is deleted and redefined by the *DIM 
 command.                                                                <\/p>\n

 SET PARAMETER DIMENSIONS ON  R1 TYPE=ARRA  DIMENSIONS=     1     1     1<\/p>\n

 *** WARNING ***                         CP =       0.219   TIME= 14:14:00
 Parameter R1 already exists.  It is deleted and redefined by the *DIM   
 command.                                                                <\/p>\n

 SET PARAMETER DIMENSIONS ON  LD TYPE=ARRA  DIMENSIONS=     1     1     1<\/p>\n

 *** WARNING ***                         CP =       0.219   TIME= 14:14:00
 Parameter LD already exists.  It is deleted and redefined by the *DIM   
 command.                                                                <\/p>\n

 SET PARAMETER DIMENSIONS ON  TMST TYPE=ARRA  DIMENSIONS=     1     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  TMLT TYPE=ARRA  DIMENSIONS=     1     1     1<\/p>\n

 VECTOR READ OPERATION  *VREAD  
  INDEX    READ FROM FILE INDEX1.TXT
 VECTOR LENGTH=      1
 LOOP DIRECTIONS=IJK   COUNTS=       1       1       1
 FORMAT=(f3.0)                                                                <\/p>\n

 VECTOR READ OPERATION  *VREAD  
  VELOCITY READ FROM FILE VELOCITY1.TXT
 VECTOR LENGTH=      1
 LOOP DIRECTIONS=IJK   COUNTS=       1       1       1
 FORMAT=(f10.5)                                                               <\/p>\n

 VECTOR READ OPERATION  *VREAD  
  LSTP     READ FROM FILE LSTP1.TXT
 VECTOR LENGTH=      1
 LOOP DIRECTIONS=IJK   COUNTS=       1       1       1
 FORMAT=(f3.0)                                                                <\/p>\n

 VECTOR READ OPERATION  *VREAD  
  R1       READ FROM FILE CON1.TXT
 VECTOR LENGTH=      1
 LOOP DIRECTIONS=IJK   COUNTS=       1       1       1
 FORMAT=(f10.5)                                                               <\/p>\n

 VECTOR READ OPERATION  *VREAD  
  LD       READ FROM FILE LD1.TXT
 VECTOR LENGTH=      1
 LOOP DIRECTIONS=IJK   COUNTS=       1       1       1
 FORMAT=(f30.3)                                                               <\/p>\n

 VECTOR READ OPERATION  *VREAD  
  TMST     READ FROM FILE TMST1.TXT
 VECTOR LENGTH=      1
 LOOP DIRECTIONS=IJK   COUNTS=       1       1       1
 FORMAT=(f10.5)                                                               <\/p>\n

 VECTOR READ OPERATION  *VREAD  
  TMLT     READ FROM FILE TMLT1.TXT
 VECTOR LENGTH=      1
 LOOP DIRECTIONS=IJK   COUNTS=       1       1       1
 FORMAT=(f10.5)                                                               <\/p>\n

 *DO LOOP ON PARAMETER= INC1 FROM  1.0000     TO  1.0000     BY  1.0000    <\/p>\n

 *IF  INC1                              ( =   1.00000     )  EQ  
      1                                 ( =   1.00000     )  THEN    <\/p>\n

 SELECT      COMPONENT FACE1                                                                                                                                                                                                                                                           <\/p>\n

 *ELSE<\/p>\n

 *ENDIF<\/p>\n

 *ENDDO  INDEX= INC1                            <\/p>\n

 DEFINITION OF COMPONENT = FACE      ENTITY=NODE<\/p>\n

 SELECT ALL ENTITIES OF TYPE= ALL  AND BELOW<\/p>\n

 *DO LOOP ON PARAMETER= INC1 FROM  1.0000     TO  1.0000     BY  1.0000    <\/p>\n

 SELECT      COMPONENT PATH1                                                                                                                                                                                                                                                           <\/p>\n

 *GET  PT_ND1    FROM  NODE  ITEM=COUN       VALUE=  81.0000000     <\/p>\n

 SET PARAMETER DIMENSIONS ON  N_PT1 TYPE=ARRA  DIMENSIONS=    81     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  X_PT1 TYPE=ARRA  DIMENSIONS=    81     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  Y_PT1 TYPE=ARRA  DIMENSIONS=    81     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  Z_PT1 TYPE=ARRA  DIMENSIONS=    81     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  PT_LEN1 TYPE=ARRA  DIMENSIONS=    81     1     1<\/p>\n

 SELECT      COMPONENT START1                                                                                                                                                                                                                                                          <\/p>\n

 *GET  ND1       FROM  NODE  ITEM=NUM  MIN   VALUE=  286.000000     <\/p>\n

 SELECT ALL ENTITIES OF TYPE= ALL  AND BELOW<\/p>\n

 SELECT      COMPONENT PATH1                                                                                                                                                                                                                                                           <\/p>\n

 PARAMETER PT_LEN1(1,1) =     0.000000000    <\/p>\n

 *DO LOOP ON PARAMETER= INC2 FROM  1.0000     TO  81.000     BY  1.0000    <\/p>\n

 PARAMETER N_PT1(INC2,1) =     286.0000000    <\/p>\n

 PARAMETER X_PT1(INC2,1) =     5.000000000    <\/p>\n

 PARAMETER Y_PT1(INC2,1) =     0.000000000    <\/p>\n

 PARAMETER Z_PT1(INC2,1) =    -10.00000000    <\/p>\n

 PARAMETER ND2 =     5488.000000    <\/p>\n

 *IF  INC2                              ( =   1.00000     )  NE  
      PT_ND%INDEX(INC1,1)%              ( =   81.0000     )  THEN    <\/p>\n

 PARAMETER PT_LEN1(INC2+1,1) =    0.5000000000    <\/p>\n

 *ENDIF<\/p>\n

 UNSELECT     FOR ITEM=NODE COMPONENT=    
  IN RANGE       286 TO        286 STEP          1<\/p>\n

         80  NODES (OF      24107  DEFINED) SELECTED BY  NSEL  COMMAND.<\/p>\n

 PARAMETER ND1 =     5488.000000    <\/p>\n

 *ENDDO  INDEX= INC2                            <\/p>\n

 SELECT ALL ENTITIES OF TYPE= ALL  AND BELOW<\/p>\n

 PARAMETER TOT_LEN1 =     40.00000000    <\/p>\n

 PARAMETER VEL_M1 =     20.00000000    <\/p>\n

 *ENDDO  INDEX= INC1                            <\/p>\n

 VECTOR PARAMETER OPERATION *VSCFUN 
  MAX_T    = MAX  TMLT            
 VECTOR LENGTH=       1
 RESULT=  2.0000    <\/p>\n

 VECTOR PARAMETER OPERATION *VSCFUN 
  MIN_T    = MIN  TMST            
 VECTOR LENGTH=       1
 RESULT=  0.0000    <\/p>\n

 PARAMETER DT =    0.1000000000E-01<\/p>\n

 SET PARAMETER DIMENSIONS ON  T_NR TYPE=ARRA  DIMENSIONS=   201     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  P1 TYPE=ARRA  DIMENSIONS=   201     1     1<\/p>\n

 VECTOR FILL OPERATION  *VFILL  
  T_NR             = RAMP
 VECTOR LENGTH=     201
 INITIAL VALUE=  0.0000      STEP INCREMENT= 0.10000E-01<\/p>\n

 *DO LOOP ON PARAMETER= INC1 FROM  1.0000     TO  1.0000     BY  1.0000    <\/p>\n

 PARAMETER TM_S =     0.000000000    <\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  P1               = T_NR             GE   TM_S            
  VECTOR LENGTH=     201<\/p>\n

 VECTOR PARAMETER OPERATION *VSCFUN 
  TS1      = FIRS P1              
 VECTOR LENGTH=     201
 RESULT=  1.0000    <\/p>\n

 PARAMETER TM_E =     2.000000000    <\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  P1               = T_NR             GE   TM_E            
  VECTOR LENGTH=     201<\/p>\n

 VECTOR PARAMETER OPERATION *VSCFUN 
  TE1      = FIRS P1              
 VECTOR LENGTH=     201
 RESULT=  201.00    <\/p>\n

 PARAMETER STATUS- TS1  (     57 PARAMETERS DEFINED)
                  (INCLUDING       22 INTERNAL PARAMETERS)<\/p>\n

 NAME                              VALUE                        TYPE  DIMENSIONS
 TS1                               1.00000000                  SCALAR<\/p>\n

 PARAMETER STATUS- TE1  (     57 PARAMETERS DEFINED)
                  (INCLUDING       22 INTERNAL PARAMETERS)<\/p>\n

 NAME                              VALUE                        TYPE  DIMENSIONS
 TE1                               201.000000                  SCALAR<\/p>\n

 *ENDDO  INDEX= INC1                            <\/p>\n

 SELECT ALL ENTITIES OF TYPE= ALL  AND BELOW<\/p>\n

 *GET  NDT       FROM  NODE  ITEM=COUN       VALUE=  24107.0000     <\/p>\n

 SET PARAMETER DIMENSIONS ON  VARY_LD TYPE=ARRA  DIMENSIONS= 24107     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  X_LOC TYPE=ARRA  DIMENSIONS= 24107     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  Y_LOC TYPE=ARRA  DIMENSIONS= 24107     1     1<\/p>\n

 SET PARAMETER DIMENSIONS ON  Z_LOC TYPE=ARRA  DIMENSIONS= 24107     1     1<\/p>\n

 VECTOR GET OPERATION  X_LOC  VECTOR LENGTH=   24107
 NAME= NODE         0  LOC   X   <\/p>\n

 VECTOR GET OPERATION  Y_LOC  VECTOR LENGTH=   24107
 NAME= NODE         0  LOC   Y   <\/p>\n

 VECTOR GET OPERATION  Z_LOC  VECTOR LENGTH=   24107
 NAME= NODE         0  LOC   Z   <\/p>\n

 *DO LOOP ON PARAMETER= INC1 FROM  1.0000     TO  1.0000     BY  1.0000    <\/p>\n

 SELECT      COMPONENT FACE1                                                                                                                                                                                                                                                           <\/p>\n

 VECTOR GET OPERATION  NMASK  VECTOR LENGTH=   24107
 NAME= NODE         0  NSEL      <\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  NMASK_1          = NMASK            ADD  1               
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  NMASK1           = NMASK_1          DIV  2               
  VECTOR LENGTH=   24107<\/p>\n

 *ENDDO  INDEX= INC1                            <\/p>\n

 SELECT ALL ENTITIES OF TYPE= ALL  AND BELOW<\/p>\n

 *GET  MAX_TYP   FROM  ETYP  ITEM=NUM  MAX   VALUE=  2.00000000    <\/p>\n

 *GET  MAX_MAT   FROM  MAT   ITEM=NUM  MAX   VALUE=  1.00000000    <\/p>\n

 *GET  MAX_RL    FROM  RCON  ITEM=NUM  MAX   VALUE= 0.788860905E-30<\/p>\n

 ELEMENT TYPE          3 IS SURF152      3-D THERMAL SURFACE         
  KEYOPT( 1- 6)=        0      0      0        0      0      0
  KEYOPT( 7-12)=        0      0      0        0      0      0
  KEYOPT(13-18)=        0      0      0        0      0      0<\/p>\n

 CURRENT NODAL DOF SET IS  TEMP
  THREE-DIMENSIONAL MODEL<\/p>\n

 ELEMENT TYPE       3 IS SURF152      3-D THERMAL SURFACE         
  KEYOPT( 1- 6)=        0      0      0        0      0      0
  KEYOPT( 7-12)=        0      1      0        0      0      0
  KEYOPT(13-18)=        0      0      0        0      0      0<\/p>\n

 CURRENT NODAL DOF SET IS  TEMP
  THREE-DIMENSIONAL MODEL<\/p>\n

 ELEMENT TYPE SET TO         3<\/p>\n

 MATERIAL NUMBER SET TO         2<\/p>\n

 REAL CONSTANT NUMBER=        1<\/p>\n

 SELECT      COMPONENT FACE                                                                                                                                                                                                                                                            <\/p>\n

 GENERATE ELEMENTS ON SURFACE DEFINED BY SELECTED NODES
  TYPE=        3  REAL=        1  MATERIAL=        2  ESYS=    0<\/p>\n

 NUMBER OF ELEMENTS GENERATED=       2204                         <\/p>\n

 SELECT ALL ENTITIES OF TYPE= ALL  AND BELOW<\/p>\n

 PARAMETER EXT      =         0.000000<\/p>\n

 *IF  EXT                               ( =   0.00000     )  EQ  
      1                                 ( =   1.00000     )  THEN    <\/p>\n

 *ENDIF<\/p>\n

 PARAMETER EXT      =         0.000000<\/p>\n

 *IF  EXT                               ( =   0.00000     )  EQ  
      1                                 ( =   1.00000     )  THEN    <\/p>\n

 *ENDIF<\/p>\n

 ***** ROUTINE COMPLETED *****  CP =         0.250<\/p>\n

 <\/p>\n

 *****  MAPDL SOLUTION ROUTINE  *****<\/p>\n

 *DO LOOP ON PARAMETER= INC1 FROM  1.0000     TO  201.00     BY  1.0000    <\/p>\n

 *DO LOOP ON PARAMETER= INC2 FROM  1.0000     TO  1.0000     BY  1.0000    <\/p>\n

 *IF  INC1                              ( =   1.00000     )  GE  
      TS%INDEX(INC2,1)%                 ( =   1.00000     )          
 *****  AND   *****
      INC1                              ( =   1.00000     )  LE  
      TE%INDEX(INC2,1)%                 ( =   201.000     )  THEN    <\/p>\n

 PARAMETER DIST_11 =     0.000000000    <\/p>\n

 PARAMETER DIST_21 =     0.000000000    <\/p>\n

 PARAMETER DIST1 =     0.000000000    <\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  LOC11            = PT_LEN1          GE   DIST1           
  VECTOR LENGTH=      81<\/p>\n

 VECTOR PARAMETER OPERATION *VSCFUN 
  LOC21    = FIRS LOC11           
 VECTOR LENGTH=      81
 RESULT=  1.0000    <\/p>\n

 PARAMETER LOC31 =     0.000000000    <\/p>\n

 PARAMETER A0 =     81.00000000    <\/p>\n

 *IF  INC1                              ( =   1.00000     )  EQ  
      TS%INDEX(INC2,1)%                 ( =   1.00000     )  THEN    <\/p>\n

 PARAMETER A =     5.000000000    <\/p>\n

 PARAMETER B =     0.000000000    <\/p>\n

 PARAMETER C =    -10.00000000    <\/p>\n

 *ELSEIF  INC1                              ( =   1.00000     )  EQ  
          TE%INDEX(INC2,1)%                 ( =   201.000     )  THEN    <\/p>\n

 *ELSE<\/p>\n

 *ENDIF<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  A1               = X_LOC            SUB  A               
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  B1               = Y_LOC            SUB  B               
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  C1               = Z_LOC            SUB  C               
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  A2               = A1               MULT A1              
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  B2               = B1               MULT B1              
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  C2               = C1               MULT C1              
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  A3               = A2               ADD  B2              
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  B3               = A3               ADD  C2              
  VECTOR LENGTH=   24107<\/p>\n

 PARAMETER R2 =    -2.560000000    <\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  A4               = B3               DIV  R2              
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VFUN   
  B4 = EXP   A4
 VECTOR LENGTH=   24107<\/p>\n

 PARAMETER AA1 =     156250.0000    <\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  L_D1             = AA1              MULT B4              
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  VARY_LD1         = L_D1             MULT NMASK1          
  VECTOR LENGTH=   24107<\/p>\n

 VECTOR PARAMETER OPERATION *VOPER  
  VARY_LD          = VARY_LD          ADD  VARY_LD1        
  VECTOR LENGTH=   24107<\/p>\n

 *ENDIF<\/p>\n

 *ENDDO  INDEX= INC2                            <\/p>\n

 USE THE VECTOR  VARY_LD   AS SURFACE LOAD FUNCTION<\/p>\n

 SELECT       FOR ITEM=TYPE COMPONENT=    
  IN RANGE         3 TO          3 STEP          1<\/p>\n

       2204  ELEMENTS (OF      21396  DEFINED) SELECTED BY  ESEL  COMMAND.<\/p>\n

 SPECIFIED SURFACE LOAD HFLU FOR ALL SELECTED ELEMENTS  LKEY = 1
     VALUES =     0.0000         0.0000         0.0000         0.0000    <\/p>\n

 PARAMETER TM =    0.1000000000E-01<\/p>\n

 TIME= 0.10000E-01<\/p>\n

 USE     1 SUBSTEP(S) THIS LOAD STEP FOR ALL  DEGREES OF FREEDOM<\/p>\n

 SELECT ALL ENTITIES OF TYPE= ALL  AND BELOW<\/p>\n

 *** NOTE ***                            CP =       0.359   TIME= 14:14:00
 The automatic domain decomposition logic has selected the MESH domain   
 decomposition method with 4 processes per solution.                     <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       0.359   TIME= 14:14:00
 Element shape checking is currently inactive.  Issue SHPP,ON or         
 SHPP,WARN to reactivate, if desired.                                    <\/p>\n

 *** NOTE ***                            CP =       0.359   TIME= 14:14:00
 The model data was checked and warning messages were found.             
  Please review output or errors file (                                  
 C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\_ProjectScratch\\ScrE 
 E60B\\file0.err ) for these warning messages.                            <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:00  JAN 26, 2023 CP=      0.375<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

                       S O L U T I O N   O P T I O N S<\/p>\n

   PROBLEM DIMENSIONALITY. . . . . . . . . . . . .3-D                  
   DEGREES OF FREEDOM. . . . . . TEMP
   ANALYSIS TYPE . . . . . . . . . . . . . . . . .TRANSIENT            
      SOLUTION METHOD. . . . . . . . . . . . . . .QUASI                
   OFFSET TEMPERATURE FROM ABSOLUTE ZERO . . . . .  273.15    
   NEWTON-RAPHSON OPTION . . . . . . . . . . . . .PROGRAM CHOSEN   
   GLOBALLY ASSEMBLED MATRIX . . . . . . . . . . .SYMMETRIC  <\/p>\n

 *** WARNING ***                         CP =       0.375   TIME= 14:14:00
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** NOTE ***                            CP =       0.391   TIME= 14:14:00
 The step data was checked and warning messages were found.              
  Please review output or errors file (                                  
 C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\_ProjectScratch\\ScrE 
 E60B\\file0.err ) for these warning messages.                            <\/p>\n

 *** NOTE ***                            CP =       0.391   TIME= 14:14:00
 The conditions for direct assembly have been met.  No .emat or .erot    
 files will be produced.                                                 <\/p>\n

  
  
     D I S T R I B U T E D   D O M A I N   D E C O M P O S E R
  
  …Number of elements: 21396
  …Number of nodes:    24107
  …Decompose to 4 CPU domains
  …Element load balance ratio =     1.005<\/p>\n

                      L O A D   S T E P   O P T I O N S<\/p>\n

   LOAD STEP NUMBER. . . . . . . . . . . . . . . .     1
   TIME AT END OF THE LOAD STEP. . . . . . . . . . 0.10000E-01
   AUTOMATIC TIME STEPPING . . . . . . . . . . . .    ON
      INITIAL NUMBER OF SUBSTEPS . . . . . . . . .     1
      MAXIMUM NUMBER OF SUBSTEPS . . . . . . . . .     1
      MINIMUM NUMBER OF SUBSTEPS . . . . . . . . .     1
   MAXIMUM NUMBER OF EQUILIBRIUM ITERATIONS. . . .    15
   STEP CHANGE BOUNDARY CONDITIONS . . . . . . . .   YES
   TRANSIENT (INERTIA) EFFECTS
      THERMAL DOFS . . . . . . . . . . . . . . . .    ON
   TRANSIENT INTEGRATION PARAMETERS
      THETA. . . . . . . . . . . . . . . . . . . .  1.0000    
      OSCILLATION LIMIT CRITERION. . . . . . . . . 0.50000    
      TOLERANCE. . . . . . . . . . . . . . . . . .  0.0000    
   TERMINATE ANALYSIS IF NOT CONVERGED . . . . . .YES (EXIT)  
   CONVERGENCE CONTROLS
      LABEL   REFERENCE    TOLERANCE  NORM     MINREF
       HEAT    0.000       0.1000E-02   2     0.1000E-02
   PRINT OUTPUT CONTROLS . . . . . . . . . . . . .NO PRINTOUT
   DATABASE OUTPUT CONTROLS
      ITEM     FREQUENCY   COMPONENT
       ALL       NONE               
      NSOL        ALL               
      RSOL        ALL               
      EANG        ALL               
      VENG        ALL               
      FFLU        ALL               
      CONT        ALL               
      MISC        ALL       _ELMISC <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 <\/p>\n

            **** CENTER OF MASS, MASS, AND MASS MOMENTS OF INERTIA ****<\/p>\n

  CALCULATIONS ASSUME ELEMENT MASS AT ELEMENT CENTROID<\/p>\n

  TOTAL MASS =  0.12560E-04<\/p>\n

                           MOM. OF INERTIA         MOM. OF INERTIA
  CENTER OF MASS            ABOUT ORIGIN        ABOUT CENTER OF MASS<\/p>\n

  XC =   25.000          IXX =   0.1685E-02      IXX =   0.4206E-03
  YC = -0.80000          IYY =   0.1214E-01      IYY =   0.3035E-02
  ZC =  -10.000          IZZ =   0.1048E-01      IZZ =   0.2619E-02
                         IXY =   0.2512E-03      IXY =  -0.4186E-09
                         IYZ =  -0.1005E-03      IYZ =   0.5883E-09
                         IZX =   0.3140E-02      IZX =   0.8833E-10<\/p>\n

  *** MASS SUMMARY BY ELEMENT TYPE ***<\/p>\n

  TYPE      MASS
     1  0.125600E-04<\/p>\n

 Range of element maximum matrix coefficients in global coordinates
 Maximum = 132.12988 at element 5428.                                    
 Minimum = 1.840801884E-04 at element 21534.                             <\/p>\n

   *** ELEMENT MATRIX FORMULATION TIMES
     TYPE    NUMBER   ENAME      TOTAL CP  AVE CP<\/p>\n

        1     14212  SOLID291      0.203   0.000014
        2      4980  SURF152       0.047   0.000009
        3      2204  SURF152       0.016   0.000007
 Time at end of element matrix formulation CP = 0.59375.                 <\/p>\n

 DISTRIBUTED SPARSE MATRIX DIRECT SOLVER.
  Number of equations =       24107,    Maximum wavefront =     76<\/p>\n

  Process memory allocated for solver              =    13.268 MB
  Process memory required for in-core solution     =    12.741 MB
  Process memory required for out-of-core solution =     6.643 MB<\/p>\n

  Total memory allocated for solver                =    52.041 MB
  Total memory required for in-core solution       =    49.966 MB
  Total memory required for out-of-core solution   =    25.768 MB<\/p>\n

 *** NOTE ***                            CP =       0.719   TIME= 14:14:00
 The Distributed Sparse Matrix Solver is currently running in the        
 in-core memory mode.  This memory mode uses the most amount of memory   
 in order to avoid using the hard drive as much as possible, which most  
 often results in the fastest solution time.  This mode is recommended   
 if enough physical memory is present to accommodate all of the solver   
 data.                                                                   
 Distributed sparse solver maximum pivot= 278.345736 at node 11754 TEMP. 
 Distributed sparse solver minimum pivot= 21.1551413 at node 146 TEMP.   
 Distributed sparse solver minimum pivot in absolute value= 21.1551413   
 at node 146 TEMP.                                                       <\/p>\n

   *** ELEMENT RESULT CALCULATION TIMES
     TYPE    NUMBER   ENAME      TOTAL CP  AVE CP<\/p>\n

        1     14212  SOLID291      0.156   0.000011
        2      4980  SURF152       0.062   0.000013
        3      2204  SURF152       0.000   0.000000<\/p>\n

   *** NODAL LOAD CALCULATION TIMES
     TYPE    NUMBER   ENAME      TOTAL CP  AVE CP<\/p>\n

        1     14212  SOLID291      0.141   0.000010
        2      4980  SURF152       0.016   0.000003
        3      2204  SURF152       0.000   0.000000
 *** LOAD STEP     1   SUBSTEP     1  COMPLETED.    CUM ITER =      1
 *** TIME =  0.100000E-01     TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  117.5       OSCILLATION LIMIT =  1.175    <\/p>\n

 *** MAPDL BINARY FILE STATISTICS
  BUFFER SIZE USED= 16384
        0.500 MB WRITTEN ON ELEMENT SAVED DATA FILE: file0.esav
        1.875 MB WRITTEN ON ASSEMBLED MATRIX FILE: file0.full
        2.250 MB WRITTEN ON RESULTS FILE: file0.rth<\/p>\n

 SET PARAMETER DIMENSIONS ON  VARY_LD TYPE=ARRA  DIMENSIONS= 24107     1     1<\/p>\n

 *** WARNING ***                         CP =       0.953   TIME= 14:14:01
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *ENDDO  INDEX= INC1                            <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       1.047   TIME= 14:14:01
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:01  JAN 26, 2023 CP=      1.094<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP     2   SUBSTEP     1  COMPLETED.    CUM ITER =      2
 *** TIME =  0.200000E-01     TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  29.51       OSCILLATION LIMIT = 0.2951    <\/p>\n

 *** WARNING ***                         CP =       1.406   TIME= 14:14:01
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       1.453   TIME= 14:14:01
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:01  JAN 26, 2023 CP=      1.516<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP     3   SUBSTEP     1  COMPLETED.    CUM ITER =      3
 *** TIME =  0.300000E-01     TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.84       OSCILLATION LIMIT = 0.1884    <\/p>\n

 *** WARNING ***                         CP =       1.828   TIME= 14:14:02
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       1.875   TIME= 14:14:02
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:02  JAN 26, 2023 CP=      1.922<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP     4   SUBSTEP     1  COMPLETED.    CUM ITER =      4
 *** TIME =  0.400000E-01     TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  16.03       OSCILLATION LIMIT = 0.1603    <\/p>\n

 *** WARNING ***                         CP =       2.234   TIME= 14:14:02
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       2.281   TIME= 14:14:02
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:02  JAN 26, 2023 CP=      2.328<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP     5   SUBSTEP     1  COMPLETED.    CUM ITER =      5
 *** TIME =  0.500000E-01     TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  15.86       OSCILLATION LIMIT = 0.1586    <\/p>\n

 *** WARNING ***                         CP =       2.656   TIME= 14:14:03
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       2.703   TIME= 14:14:03
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:03  JAN 26, 2023 CP=      2.766<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP     6   SUBSTEP     1  COMPLETED.    CUM ITER =      6
 *** TIME =  0.600000E-01     TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  16.58       OSCILLATION LIMIT = 0.1658    <\/p>\n

 *** WARNING ***                         CP =       3.078   TIME= 14:14:03
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       3.141   TIME= 14:14:03
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:03  JAN 26, 2023 CP=      3.188<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP     7   SUBSTEP     1  COMPLETED.    CUM ITER =      7
 *** TIME =  0.700000E-01     TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.53       OSCILLATION LIMIT = 0.1753    <\/p>\n

 *** WARNING ***                         CP =       3.500   TIME= 14:14:03
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       3.609   TIME= 14:14:03
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:03  JAN 26, 2023 CP=      3.656<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP     8   SUBSTEP     1  COMPLETED.    CUM ITER =      8
 *** TIME =  0.800000E-01     TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.44       OSCILLATION LIMIT = 0.1844    <\/p>\n

 *** WARNING ***                         CP =       3.984   TIME= 14:14:04
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       4.016   TIME= 14:14:04
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:04  JAN 26, 2023 CP=      4.078<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP     9   SUBSTEP     1  COMPLETED.    CUM ITER =      9
 *** TIME =  0.900000E-01     TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.22       OSCILLATION LIMIT = 0.1922    <\/p>\n

 *** WARNING ***                         CP =       4.391   TIME= 14:14:04
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       4.516   TIME= 14:14:04
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:04  JAN 26, 2023 CP=      4.562<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    10   SUBSTEP     1  COMPLETED.    CUM ITER =     10
 *** TIME =  0.100000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.81       OSCILLATION LIMIT = 0.1981    <\/p>\n

 *** WARNING ***                         CP =       4.875   TIME= 14:14:05
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       4.938   TIME= 14:14:05
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:05  JAN 26, 2023 CP=      5.000<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    11   SUBSTEP     1  COMPLETED.    CUM ITER =     11
 *** TIME =  0.110000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.18       OSCILLATION LIMIT = 0.2018    <\/p>\n

 *** WARNING ***                         CP =       5.312   TIME= 14:14:05
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       5.344   TIME= 14:14:05
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:05  JAN 26, 2023 CP=      5.406<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    12   SUBSTEP     1  COMPLETED.    CUM ITER =     12
 *** TIME =  0.120000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.36       OSCILLATION LIMIT = 0.2036    <\/p>\n

 *** WARNING ***                         CP =       5.734   TIME= 14:14:05
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       5.766   TIME= 14:14:05
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:06  JAN 26, 2023 CP=      5.812<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    13   SUBSTEP     1  COMPLETED.    CUM ITER =     13
 *** TIME =  0.130000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.39       OSCILLATION LIMIT = 0.2039    <\/p>\n

 *** WARNING ***                         CP =       6.141   TIME= 14:14:06
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       6.172   TIME= 14:14:06
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:06  JAN 26, 2023 CP=      6.234<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    14   SUBSTEP     1  COMPLETED.    CUM ITER =     14
 *** TIME =  0.140000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.32       OSCILLATION LIMIT = 0.2032    <\/p>\n

 *** WARNING ***                         CP =       6.547   TIME= 14:14:06
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       6.625   TIME= 14:14:06
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:06  JAN 26, 2023 CP=      6.719<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    15   SUBSTEP     1  COMPLETED.    CUM ITER =     15
 *** TIME =  0.150000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.24       OSCILLATION LIMIT = 0.2024    <\/p>\n

 *** WARNING ***                         CP =       7.031   TIME= 14:14:07
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       7.078   TIME= 14:14:07
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:07  JAN 26, 2023 CP=      7.125<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    16   SUBSTEP     1  COMPLETED.    CUM ITER =     16
 *** TIME =  0.160000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.20       OSCILLATION LIMIT = 0.2020    <\/p>\n

 *** WARNING ***                         CP =       7.438   TIME= 14:14:07
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       7.469   TIME= 14:14:07
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:07  JAN 26, 2023 CP=      7.516<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    17   SUBSTEP     1  COMPLETED.    CUM ITER =     17
 *** TIME =  0.170000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.23       OSCILLATION LIMIT = 0.2023    <\/p>\n

 *** WARNING ***                         CP =       7.844   TIME= 14:14:08
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       7.922   TIME= 14:14:08
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:08  JAN 26, 2023 CP=      8.031<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    18   SUBSTEP     1  COMPLETED.    CUM ITER =     18
 *** TIME =  0.180000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.34       OSCILLATION LIMIT = 0.2034    <\/p>\n

 *** WARNING ***                         CP =       8.359   TIME= 14:14:08
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       8.453   TIME= 14:14:08
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:08  JAN 26, 2023 CP=      8.562<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    19   SUBSTEP     1  COMPLETED.    CUM ITER =     19
 *** TIME =  0.190000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.49       OSCILLATION LIMIT = 0.2049    <\/p>\n

 *** WARNING ***                         CP =       8.906   TIME= 14:14:08
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       8.969   TIME= 14:14:09
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:09  JAN 26, 2023 CP=      9.047<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    20   SUBSTEP     1  COMPLETED.    CUM ITER =     20
 *** TIME =  0.200000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.64       OSCILLATION LIMIT = 0.2064    <\/p>\n

 *** WARNING ***                         CP =       9.359   TIME= 14:14:09
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       9.438   TIME= 14:14:09
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:09  JAN 26, 2023 CP=      9.500<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    21   SUBSTEP     1  COMPLETED.    CUM ITER =     21
 *** TIME =  0.210000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.74       OSCILLATION LIMIT = 0.2074    <\/p>\n

 *** WARNING ***                         CP =       9.844   TIME= 14:14:09
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =       9.906   TIME= 14:14:09
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:10  JAN 26, 2023 CP=      9.984<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    22   SUBSTEP     1  COMPLETED.    CUM ITER =     22
 *** TIME =  0.220000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.77       OSCILLATION LIMIT = 0.2077    <\/p>\n

 *** WARNING ***                         CP =      10.312   TIME= 14:14:10
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      10.391   TIME= 14:14:10
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:10  JAN 26, 2023 CP=     10.453<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    23   SUBSTEP     1  COMPLETED.    CUM ITER =     23
 *** TIME =  0.230000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.71       OSCILLATION LIMIT = 0.2071    <\/p>\n

 *** WARNING ***                         CP =      10.797   TIME= 14:14:10
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      10.859   TIME= 14:14:10
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:10  JAN 26, 2023 CP=     10.922<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    24   SUBSTEP     1  COMPLETED.    CUM ITER =     24
 *** TIME =  0.240000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.59       OSCILLATION LIMIT = 0.2059    <\/p>\n

 *** WARNING ***                         CP =      11.250   TIME= 14:14:11
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      11.297   TIME= 14:14:11
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:11  JAN 26, 2023 CP=     11.375<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    25   SUBSTEP     1  COMPLETED.    CUM ITER =     25
 *** TIME =  0.250000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.43       OSCILLATION LIMIT = 0.2043    <\/p>\n

 *** WARNING ***                         CP =      11.703   TIME= 14:14:11
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      11.750   TIME= 14:14:11
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:11  JAN 26, 2023 CP=     11.859<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    26   SUBSTEP     1  COMPLETED.    CUM ITER =     26
 *** TIME =  0.260000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.28       OSCILLATION LIMIT = 0.2028    <\/p>\n

 *** WARNING ***                         CP =      12.156   TIME= 14:14:12
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      12.266   TIME= 14:14:12
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:12  JAN 26, 2023 CP=     12.328<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    27   SUBSTEP     1  COMPLETED.    CUM ITER =     27
 *** TIME =  0.270000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.15       OSCILLATION LIMIT = 0.2015    <\/p>\n

 *** WARNING ***                         CP =      12.672   TIME= 14:14:12
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      12.750   TIME= 14:14:12
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:12  JAN 26, 2023 CP=     12.812<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    28   SUBSTEP     1  COMPLETED.    CUM ITER =     28
 *** TIME =  0.280000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.07       OSCILLATION LIMIT = 0.2007    <\/p>\n

 *** WARNING ***                         CP =      13.109   TIME= 14:14:13
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      13.188   TIME= 14:14:13
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:13  JAN 26, 2023 CP=     13.250<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    29   SUBSTEP     1  COMPLETED.    CUM ITER =     29
 *** TIME =  0.290000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.03       OSCILLATION LIMIT = 0.2003    <\/p>\n

 *** WARNING ***                         CP =      13.547   TIME= 14:14:13
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      13.594   TIME= 14:14:13
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:13  JAN 26, 2023 CP=     13.656<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    30   SUBSTEP     1  COMPLETED.    CUM ITER =     30
 *** TIME =  0.300000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.03       OSCILLATION LIMIT = 0.2003    <\/p>\n

 *** WARNING ***                         CP =      14.000   TIME= 14:14:14
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      14.109   TIME= 14:14:14
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:14  JAN 26, 2023 CP=     14.188<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    31   SUBSTEP     1  COMPLETED.    CUM ITER =     31
 *** TIME =  0.310000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.05       OSCILLATION LIMIT = 0.2005    <\/p>\n

 *** WARNING ***                         CP =      14.516   TIME= 14:14:14
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      14.625   TIME= 14:14:14
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:14  JAN 26, 2023 CP=     14.688<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    32   SUBSTEP     1  COMPLETED.    CUM ITER =     32
 *** TIME =  0.320000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.06       OSCILLATION LIMIT = 0.2006    <\/p>\n

 *** WARNING ***                         CP =      14.984   TIME= 14:14:15
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      15.062   TIME= 14:14:15
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:15  JAN 26, 2023 CP=     15.125<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    33   SUBSTEP     1  COMPLETED.    CUM ITER =     33
 *** TIME =  0.330000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.05       OSCILLATION LIMIT = 0.2005    <\/p>\n

 *** WARNING ***                         CP =      15.469   TIME= 14:14:15
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      15.500   TIME= 14:14:15
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:15  JAN 26, 2023 CP=     15.578<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    34   SUBSTEP     1  COMPLETED.    CUM ITER =     34
 *** TIME =  0.340000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  20.00       OSCILLATION LIMIT = 0.2000    <\/p>\n

 *** WARNING ***                         CP =      15.906   TIME= 14:14:15
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      16.000   TIME= 14:14:15
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:16  JAN 26, 2023 CP=     16.062<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    35   SUBSTEP     1  COMPLETED.    CUM ITER =     35
 *** TIME =  0.350000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.90       OSCILLATION LIMIT = 0.1990    <\/p>\n

 *** WARNING ***                         CP =      16.406   TIME= 14:14:16
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      16.438   TIME= 14:14:16
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:16  JAN 26, 2023 CP=     16.500<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    36   SUBSTEP     1  COMPLETED.    CUM ITER =     36
 *** TIME =  0.360000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.77       OSCILLATION LIMIT = 0.1977    <\/p>\n

 *** WARNING ***                         CP =      16.844   TIME= 14:14:16
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      16.891   TIME= 14:14:16
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:16  JAN 26, 2023 CP=     16.953<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    37   SUBSTEP     1  COMPLETED.    CUM ITER =     37
 *** TIME =  0.370000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.63       OSCILLATION LIMIT = 0.1963    <\/p>\n

 *** WARNING ***                         CP =      17.281   TIME= 14:14:17
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      17.328   TIME= 14:14:17
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:17  JAN 26, 2023 CP=     17.391<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    38   SUBSTEP     1  COMPLETED.    CUM ITER =     38
 *** TIME =  0.380000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.50       OSCILLATION LIMIT = 0.1950    <\/p>\n

 *** WARNING ***                         CP =      17.734   TIME= 14:14:17
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      17.797   TIME= 14:14:17
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:17  JAN 26, 2023 CP=     17.875<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    39   SUBSTEP     1  COMPLETED.    CUM ITER =     39
 *** TIME =  0.390000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.42       OSCILLATION LIMIT = 0.1942    <\/p>\n

 *** WARNING ***                         CP =      18.203   TIME= 14:14:18
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      18.281   TIME= 14:14:18
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:18  JAN 26, 2023 CP=     18.344<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    40   SUBSTEP     1  COMPLETED.    CUM ITER =     40
 *** TIME =  0.400000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.38       OSCILLATION LIMIT = 0.1938    <\/p>\n

 *** WARNING ***                         CP =      18.672   TIME= 14:14:18
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      18.781   TIME= 14:14:18
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:18  JAN 26, 2023 CP=     18.844<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    41   SUBSTEP     1  COMPLETED.    CUM ITER =     41
 *** TIME =  0.410000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.38       OSCILLATION LIMIT = 0.1938    <\/p>\n

 *** WARNING ***                         CP =      19.188   TIME= 14:14:19
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      19.250   TIME= 14:14:19
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:19  JAN 26, 2023 CP=     19.312<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    42   SUBSTEP     1  COMPLETED.    CUM ITER =     42
 *** TIME =  0.420000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.40       OSCILLATION LIMIT = 0.1940    <\/p>\n

 *** WARNING ***                         CP =      19.641   TIME= 14:14:19
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      19.719   TIME= 14:14:19
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:19  JAN 26, 2023 CP=     19.781<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    43   SUBSTEP     1  COMPLETED.    CUM ITER =     43
 *** TIME =  0.430000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.42       OSCILLATION LIMIT = 0.1942    <\/p>\n

 *** WARNING ***                         CP =      20.125   TIME= 14:14:19
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      20.188   TIME= 14:14:20
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:20  JAN 26, 2023 CP=     20.266<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    44   SUBSTEP     1  COMPLETED.    CUM ITER =     44
 *** TIME =  0.440000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.42       OSCILLATION LIMIT = 0.1942    <\/p>\n

 *** WARNING ***                         CP =      20.594   TIME= 14:14:20
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      20.672   TIME= 14:14:20
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:20  JAN 26, 2023 CP=     20.781<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    45   SUBSTEP     1  COMPLETED.    CUM ITER =     45
 *** TIME =  0.450000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.38       OSCILLATION LIMIT = 0.1938    <\/p>\n

 *** WARNING ***                         CP =      21.109   TIME= 14:14:20
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      21.188   TIME= 14:14:20
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:21  JAN 26, 2023 CP=     21.250<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    46   SUBSTEP     1  COMPLETED.    CUM ITER =     46
 *** TIME =  0.460000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.31       OSCILLATION LIMIT = 0.1931    <\/p>\n

 *** WARNING ***                         CP =      21.594   TIME= 14:14:21
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      21.672   TIME= 14:14:21
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:21  JAN 26, 2023 CP=     21.750<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    47   SUBSTEP     1  COMPLETED.    CUM ITER =     47
 *** TIME =  0.470000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.23       OSCILLATION LIMIT = 0.1923    <\/p>\n

 *** WARNING ***                         CP =      22.078   TIME= 14:14:21
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      22.156   TIME= 14:14:21
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:21  JAN 26, 2023 CP=     22.219<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    48   SUBSTEP     1  COMPLETED.    CUM ITER =     48
 *** TIME =  0.480000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.14       OSCILLATION LIMIT = 0.1914    <\/p>\n

 *** WARNING ***                         CP =      22.531   TIME= 14:14:22
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      22.594   TIME= 14:14:22
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:22  JAN 26, 2023 CP=     22.656<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    49   SUBSTEP     1  COMPLETED.    CUM ITER =     49
 *** TIME =  0.490000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.06       OSCILLATION LIMIT = 0.1906    <\/p>\n

 *** WARNING ***                         CP =      22.984   TIME= 14:14:22
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      23.031   TIME= 14:14:22
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:22  JAN 26, 2023 CP=     23.109<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    50   SUBSTEP     1  COMPLETED.    CUM ITER =     50
 *** TIME =  0.500000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  19.01       OSCILLATION LIMIT = 0.1901    <\/p>\n

 *** WARNING ***                         CP =      23.438   TIME= 14:14:23
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      23.484   TIME= 14:14:23
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:23  JAN 26, 2023 CP=     23.547<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    51   SUBSTEP     1  COMPLETED.    CUM ITER =     51
 *** TIME =  0.510000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.97       OSCILLATION LIMIT = 0.1897    <\/p>\n

 *** WARNING ***                         CP =      23.859   TIME= 14:14:23
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      23.906   TIME= 14:14:23
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:23  JAN 26, 2023 CP=     24.016<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    52   SUBSTEP     1  COMPLETED.    CUM ITER =     52
 *** TIME =  0.520000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.95       OSCILLATION LIMIT = 0.1895    <\/p>\n

 *** WARNING ***                         CP =      24.344   TIME= 14:14:24
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      24.438   TIME= 14:14:24
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:24  JAN 26, 2023 CP=     24.516<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    53   SUBSTEP     1  COMPLETED.    CUM ITER =     53
 *** TIME =  0.530000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.93       OSCILLATION LIMIT = 0.1893    <\/p>\n

 *** WARNING ***                         CP =      24.844   TIME= 14:14:24
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      24.906   TIME= 14:14:24
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:24  JAN 26, 2023 CP=     25.016<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    54   SUBSTEP     1  COMPLETED.    CUM ITER =     54
 *** TIME =  0.540000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.89       OSCILLATION LIMIT = 0.1889    <\/p>\n

 *** WARNING ***                         CP =      25.328   TIME= 14:14:25
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      25.391   TIME= 14:14:25
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:25  JAN 26, 2023 CP=     25.453<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    55   SUBSTEP     1  COMPLETED.    CUM ITER =     55
 *** TIME =  0.550000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.84       OSCILLATION LIMIT = 0.1884    <\/p>\n

 *** WARNING ***                         CP =      25.781   TIME= 14:14:25
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      25.859   TIME= 14:14:25
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:25  JAN 26, 2023 CP=     25.938<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    56   SUBSTEP     1  COMPLETED.    CUM ITER =     56
 *** TIME =  0.560000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.78       OSCILLATION LIMIT = 0.1878    <\/p>\n

 *** WARNING ***                         CP =      26.266   TIME= 14:14:25
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      26.328   TIME= 14:14:25
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:26  JAN 26, 2023 CP=     26.391<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    57   SUBSTEP     1  COMPLETED.    CUM ITER =     57
 *** TIME =  0.570000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.71       OSCILLATION LIMIT = 0.1871    <\/p>\n

 *** WARNING ***                         CP =      26.719   TIME= 14:14:26
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      26.781   TIME= 14:14:26
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:26  JAN 26, 2023 CP=     26.891<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    58   SUBSTEP     1  COMPLETED.    CUM ITER =     58
 *** TIME =  0.580000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.66       OSCILLATION LIMIT = 0.1866    <\/p>\n

 *** WARNING ***                         CP =      27.234   TIME= 14:14:26
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      27.312   TIME= 14:14:26
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:26  JAN 26, 2023 CP=     27.391<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    59   SUBSTEP     1  COMPLETED.    CUM ITER =     59
 *** TIME =  0.590000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.62       OSCILLATION LIMIT = 0.1862    <\/p>\n

 *** WARNING ***                         CP =      27.719   TIME= 14:14:27
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      27.781   TIME= 14:14:27
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:27  JAN 26, 2023 CP=     27.844<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    60   SUBSTEP     1  COMPLETED.    CUM ITER =     60
 *** TIME =  0.600000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.61       OSCILLATION LIMIT = 0.1861    <\/p>\n

 *** WARNING ***                         CP =      28.172   TIME= 14:14:27
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      28.219   TIME= 14:14:27
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:27  JAN 26, 2023 CP=     28.297<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    61   SUBSTEP     1  COMPLETED.    CUM ITER =     61
 *** TIME =  0.610000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.61       OSCILLATION LIMIT = 0.1861    <\/p>\n

 *** WARNING ***                         CP =      28.625   TIME= 14:14:28
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      28.750   TIME= 14:14:28
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:28  JAN 26, 2023 CP=     28.812<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    62   SUBSTEP     1  COMPLETED.    CUM ITER =     62
 *** TIME =  0.620000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.62       OSCILLATION LIMIT = 0.1862    <\/p>\n

 *** WARNING ***                         CP =      29.141   TIME= 14:14:28
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      29.188   TIME= 14:14:28
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:28  JAN 26, 2023 CP=     29.250<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    63   SUBSTEP     1  COMPLETED.    CUM ITER =     63
 *** TIME =  0.630000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.65       OSCILLATION LIMIT = 0.1865    <\/p>\n

 *** WARNING ***                         CP =      29.594   TIME= 14:14:29
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      29.672   TIME= 14:14:29
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:29  JAN 26, 2023 CP=     29.750<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    64   SUBSTEP     1  COMPLETED.    CUM ITER =     64
 *** TIME =  0.640000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.67       OSCILLATION LIMIT = 0.1867    <\/p>\n

 *** WARNING ***                         CP =      30.078   TIME= 14:14:29
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      30.125   TIME= 14:14:29
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:29  JAN 26, 2023 CP=     30.234<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    65   SUBSTEP     1  COMPLETED.    CUM ITER =     65
 *** TIME =  0.650000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.69       OSCILLATION LIMIT = 0.1869    <\/p>\n

 *** WARNING ***                         CP =      30.531   TIME= 14:14:30
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      30.609   TIME= 14:14:30
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:30  JAN 26, 2023 CP=     30.672<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    66   SUBSTEP     1  COMPLETED.    CUM ITER =     66
 *** TIME =  0.660000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.70       OSCILLATION LIMIT = 0.1870    <\/p>\n

 *** WARNING ***                         CP =      31.016   TIME= 14:14:30
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      31.078   TIME= 14:14:30
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:30  JAN 26, 2023 CP=     31.156<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    67   SUBSTEP     1  COMPLETED.    CUM ITER =     67
 *** TIME =  0.670000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.70       OSCILLATION LIMIT = 0.1870    <\/p>\n

 *** WARNING ***                         CP =      31.484   TIME= 14:14:31
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      31.609   TIME= 14:14:31
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:31  JAN 26, 2023 CP=     31.672<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    68   SUBSTEP     1  COMPLETED.    CUM ITER =     68
 *** TIME =  0.680000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.67       OSCILLATION LIMIT = 0.1867    <\/p>\n

 *** WARNING ***                         CP =      32.016   TIME= 14:14:31
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      32.078   TIME= 14:14:31
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:31  JAN 26, 2023 CP=     32.141<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    69   SUBSTEP     1  COMPLETED.    CUM ITER =     69
 *** TIME =  0.690000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.63       OSCILLATION LIMIT = 0.1863    <\/p>\n

 *** WARNING ***                         CP =      32.469   TIME= 14:14:31
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      32.516   TIME= 14:14:32
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:32  JAN 26, 2023 CP=     32.594<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    70   SUBSTEP     1  COMPLETED.    CUM ITER =     70
 *** TIME =  0.700000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.56       OSCILLATION LIMIT = 0.1856    <\/p>\n

 *** WARNING ***                         CP =      32.922   TIME= 14:14:32
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      33.000   TIME= 14:14:32
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:32  JAN 26, 2023 CP=     33.062<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    71   SUBSTEP     1  COMPLETED.    CUM ITER =     71
 *** TIME =  0.710000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.48       OSCILLATION LIMIT = 0.1848    <\/p>\n

 *** WARNING ***                         CP =      33.406   TIME= 14:14:32
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      33.438   TIME= 14:14:32
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:33  JAN 26, 2023 CP=     33.516<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    72   SUBSTEP     1  COMPLETED.    CUM ITER =     72
 *** TIME =  0.720000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.40       OSCILLATION LIMIT = 0.1840    <\/p>\n

 *** WARNING ***                         CP =      33.844   TIME= 14:14:33
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      33.922   TIME= 14:14:33
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:33  JAN 26, 2023 CP=     33.984<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    73   SUBSTEP     1  COMPLETED.    CUM ITER =     73
 *** TIME =  0.730000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.32       OSCILLATION LIMIT = 0.1832    <\/p>\n

 *** WARNING ***                         CP =      34.312   TIME= 14:14:33
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      34.344   TIME= 14:14:33
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:33  JAN 26, 2023 CP=     34.406<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    74   SUBSTEP     1  COMPLETED.    CUM ITER =     74
 *** TIME =  0.740000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.28       OSCILLATION LIMIT = 0.1828    <\/p>\n

 *** WARNING ***                         CP =      34.750   TIME= 14:14:34
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      34.781   TIME= 14:14:34
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:34  JAN 26, 2023 CP=     34.859<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    75   SUBSTEP     1  COMPLETED.    CUM ITER =     75
 *** TIME =  0.750000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.27       OSCILLATION LIMIT = 0.1827    <\/p>\n

 *** WARNING ***                         CP =      35.188   TIME= 14:14:34
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      35.266   TIME= 14:14:34
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:34  JAN 26, 2023 CP=     35.344<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    76   SUBSTEP     1  COMPLETED.    CUM ITER =     76
 *** TIME =  0.760000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.32       OSCILLATION LIMIT = 0.1832    <\/p>\n

 *** WARNING ***                         CP =      35.656   TIME= 14:14:35
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      35.750   TIME= 14:14:35
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:35  JAN 26, 2023 CP=     35.812<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    77   SUBSTEP     1  COMPLETED.    CUM ITER =     77
 *** TIME =  0.770000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.41       OSCILLATION LIMIT = 0.1841    <\/p>\n

 *** WARNING ***                         CP =      36.156   TIME= 14:14:35
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      36.203   TIME= 14:14:35
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:35  JAN 26, 2023 CP=     36.281<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    78   SUBSTEP     1  COMPLETED.    CUM ITER =     78
 *** TIME =  0.780000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.52       OSCILLATION LIMIT = 0.1852    <\/p>\n

 *** WARNING ***                         CP =      36.609   TIME= 14:14:36
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      36.672   TIME= 14:14:36
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:36  JAN 26, 2023 CP=     36.781<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    79   SUBSTEP     1  COMPLETED.    CUM ITER =     79
 *** TIME =  0.790000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.61       OSCILLATION LIMIT = 0.1861    <\/p>\n

 *** WARNING ***                         CP =      37.094   TIME= 14:14:36
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      37.188   TIME= 14:14:36
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:36  JAN 26, 2023 CP=     37.250<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    80   SUBSTEP     1  COMPLETED.    CUM ITER =     80
 *** TIME =  0.800000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.67       OSCILLATION LIMIT = 0.1867    <\/p>\n

 *** WARNING ***                         CP =      37.594   TIME= 14:14:37
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      37.625   TIME= 14:14:37
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:37  JAN 26, 2023 CP=     37.703<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    81   SUBSTEP     1  COMPLETED.    CUM ITER =     81
 *** TIME =  0.810000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.66       OSCILLATION LIMIT = 0.1866    <\/p>\n

 *** WARNING ***                         CP =      38.031   TIME= 14:14:37
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      38.125   TIME= 14:14:37
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:37  JAN 26, 2023 CP=     38.188<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    82   SUBSTEP     1  COMPLETED.    CUM ITER =     82
 *** TIME =  0.820000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.62       OSCILLATION LIMIT = 0.1862    <\/p>\n

 *** WARNING ***                         CP =      38.500   TIME= 14:14:37
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      38.547   TIME= 14:14:37
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:38  JAN 26, 2023 CP=     38.625<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    83   SUBSTEP     1  COMPLETED.    CUM ITER =     83
 *** TIME =  0.830000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.54       OSCILLATION LIMIT = 0.1854    <\/p>\n

 *** WARNING ***                         CP =      38.953   TIME= 14:14:38
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      39.047   TIME= 14:14:38
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:38  JAN 26, 2023 CP=     39.109<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    84   SUBSTEP     1  COMPLETED.    CUM ITER =     84
 *** TIME =  0.840000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.47       OSCILLATION LIMIT = 0.1847    <\/p>\n

 *** WARNING ***                         CP =      39.438   TIME= 14:14:38
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      39.547   TIME= 14:14:38
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:38  JAN 26, 2023 CP=     39.609<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    85   SUBSTEP     1  COMPLETED.    CUM ITER =     85
 *** TIME =  0.850000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.41       OSCILLATION LIMIT = 0.1841    <\/p>\n

 *** WARNING ***                         CP =      39.953   TIME= 14:14:39
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      40.016   TIME= 14:14:39
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:39  JAN 26, 2023 CP=     40.094<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    86   SUBSTEP     1  COMPLETED.    CUM ITER =     86
 *** TIME =  0.860000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.38       OSCILLATION LIMIT = 0.1838    <\/p>\n

 *** WARNING ***                         CP =      40.422   TIME= 14:14:39
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      40.484   TIME= 14:14:39
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:39  JAN 26, 2023 CP=     40.547<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    87   SUBSTEP     1  COMPLETED.    CUM ITER =     87
 *** TIME =  0.870000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.36       OSCILLATION LIMIT = 0.1836    <\/p>\n

 *** WARNING ***                         CP =      40.859   TIME= 14:14:40
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      40.953   TIME= 14:14:40
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:40  JAN 26, 2023 CP=     41.047<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    88   SUBSTEP     1  COMPLETED.    CUM ITER =     88
 *** TIME =  0.880000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.34       OSCILLATION LIMIT = 0.1834    <\/p>\n

 *** WARNING ***                         CP =      41.391   TIME= 14:14:40
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      41.406   TIME= 14:14:40
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:40  JAN 26, 2023 CP=     41.484<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    89   SUBSTEP     1  COMPLETED.    CUM ITER =     89
 *** TIME =  0.890000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.31       OSCILLATION LIMIT = 0.1831    <\/p>\n

 *** WARNING ***                         CP =      41.812   TIME= 14:14:41
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      41.906   TIME= 14:14:41
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:41  JAN 26, 2023 CP=     42.016<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    90   SUBSTEP     1  COMPLETED.    CUM ITER =     90
 *** TIME =  0.900000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.27       OSCILLATION LIMIT = 0.1827    <\/p>\n

 *** WARNING ***                         CP =      42.359   TIME= 14:14:41
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      42.438   TIME= 14:14:41
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:41  JAN 26, 2023 CP=     42.500<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    91   SUBSTEP     1  COMPLETED.    CUM ITER =     91
 *** TIME =  0.910000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.21       OSCILLATION LIMIT = 0.1821    <\/p>\n

 *** WARNING ***                         CP =      42.844   TIME= 14:14:42
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      42.938   TIME= 14:14:42
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:42  JAN 26, 2023 CP=     43.000<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    92   SUBSTEP     1  COMPLETED.    CUM ITER =     92
 *** TIME =  0.920000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.16       OSCILLATION LIMIT = 0.1816    <\/p>\n

 *** WARNING ***                         CP =      43.328   TIME= 14:14:42
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      43.406   TIME= 14:14:42
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:42  JAN 26, 2023 CP=     43.469<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    93   SUBSTEP     1  COMPLETED.    CUM ITER =     93
 *** TIME =  0.930000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.13       OSCILLATION LIMIT = 0.1813    <\/p>\n

 *** WARNING ***                         CP =      43.812   TIME= 14:14:43
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      43.891   TIME= 14:14:43
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:43  JAN 26, 2023 CP=     44.000<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    94   SUBSTEP     1  COMPLETED.    CUM ITER =     94
 *** TIME =  0.940000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.13       OSCILLATION LIMIT = 0.1813    <\/p>\n

 *** WARNING ***                         CP =      44.344   TIME= 14:14:43
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      44.375   TIME= 14:14:43
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:43  JAN 26, 2023 CP=     44.453<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    95   SUBSTEP     1  COMPLETED.    CUM ITER =     95
 *** TIME =  0.950000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.17       OSCILLATION LIMIT = 0.1817    <\/p>\n

 *** WARNING ***                         CP =      44.781   TIME= 14:14:43
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      44.844   TIME= 14:14:44
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:44  JAN 26, 2023 CP=     44.906<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    96   SUBSTEP     1  COMPLETED.    CUM ITER =     96
 *** TIME =  0.960000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.24       OSCILLATION LIMIT = 0.1824    <\/p>\n

 *** WARNING ***                         CP =      45.250   TIME= 14:14:44
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      45.359   TIME= 14:14:44
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:44  JAN 26, 2023 CP=     45.469<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    97   SUBSTEP     1  COMPLETED.    CUM ITER =     97
 *** TIME =  0.970000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.30       OSCILLATION LIMIT = 0.1830    <\/p>\n

 *** WARNING ***                         CP =      45.812   TIME= 14:14:44
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      45.844   TIME= 14:14:44
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:44  JAN 26, 2023 CP=     45.922<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    98   SUBSTEP     1  COMPLETED.    CUM ITER =     98
 *** TIME =  0.980000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.35       OSCILLATION LIMIT = 0.1835    <\/p>\n

 *** WARNING ***                         CP =      46.250   TIME= 14:14:45
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      46.312   TIME= 14:14:45
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:45  JAN 26, 2023 CP=     46.375<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP    99   SUBSTEP     1  COMPLETED.    CUM ITER =     99
 *** TIME =  0.990000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.36       OSCILLATION LIMIT = 0.1836    <\/p>\n

 *** WARNING ***                         CP =      46.703   TIME= 14:14:45
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      46.781   TIME= 14:14:45
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:45  JAN 26, 2023 CP=     46.844<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   100   SUBSTEP     1  COMPLETED.    CUM ITER =    100
 *** TIME =   1.00000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.34       OSCILLATION LIMIT = 0.1834    <\/p>\n

 *** WARNING ***                         CP =      47.188   TIME= 14:14:46
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      47.234   TIME= 14:14:46
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:46  JAN 26, 2023 CP=     47.312<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   101   SUBSTEP     1  COMPLETED.    CUM ITER =    101
 *** TIME =   1.01000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.30       OSCILLATION LIMIT = 0.1830    <\/p>\n

 *** WARNING ***                         CP =      47.641   TIME= 14:14:46
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      47.703   TIME= 14:14:46
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:46  JAN 26, 2023 CP=     47.812<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   102   SUBSTEP     1  COMPLETED.    CUM ITER =    102
 *** TIME =   1.02000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.27       OSCILLATION LIMIT = 0.1827    <\/p>\n

 *** WARNING ***                         CP =      48.141   TIME= 14:14:47
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      48.219   TIME= 14:14:47
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:47  JAN 26, 2023 CP=     48.297<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   103   SUBSTEP     1  COMPLETED.    CUM ITER =    103
 *** TIME =   1.03000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.25       OSCILLATION LIMIT = 0.1825    <\/p>\n

 *** WARNING ***                         CP =      48.625   TIME= 14:14:47
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      48.719   TIME= 14:14:47
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:47  JAN 26, 2023 CP=     48.781<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   104   SUBSTEP     1  COMPLETED.    CUM ITER =    104
 *** TIME =   1.04000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.26       OSCILLATION LIMIT = 0.1826    <\/p>\n

 *** WARNING ***                         CP =      49.109   TIME= 14:14:48
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      49.203   TIME= 14:14:48
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:48  JAN 26, 2023 CP=     49.266<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   105   SUBSTEP     1  COMPLETED.    CUM ITER =    105
 *** TIME =   1.05000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.30       OSCILLATION LIMIT = 0.1830    <\/p>\n

 *** WARNING ***                         CP =      49.609   TIME= 14:14:48
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      49.641   TIME= 14:14:48
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:48  JAN 26, 2023 CP=     49.719<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   106   SUBSTEP     1  COMPLETED.    CUM ITER =    106
 *** TIME =   1.06000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.35       OSCILLATION LIMIT = 0.1835    <\/p>\n

 *** WARNING ***                         CP =      50.047   TIME= 14:14:49
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      50.125   TIME= 14:14:49
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:49  JAN 26, 2023 CP=     50.188<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   107   SUBSTEP     1  COMPLETED.    CUM ITER =    107
 *** TIME =   1.07000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.40       OSCILLATION LIMIT = 0.1840    <\/p>\n

 *** WARNING ***                         CP =      50.516   TIME= 14:14:49
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      50.594   TIME= 14:14:49
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:49  JAN 26, 2023 CP=     50.672<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   108   SUBSTEP     1  COMPLETED.    CUM ITER =    108
 *** TIME =   1.08000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.44       OSCILLATION LIMIT = 0.1844    <\/p>\n

 *** WARNING ***                         CP =      51.000   TIME= 14:14:49
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      51.047   TIME= 14:14:49
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:50  JAN 26, 2023 CP=     51.109<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   109   SUBSTEP     1  COMPLETED.    CUM ITER =    109
 *** TIME =   1.09000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.45       OSCILLATION LIMIT = 0.1845    <\/p>\n

 *** WARNING ***                         CP =      51.438   TIME= 14:14:50
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      51.484   TIME= 14:14:50
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:50  JAN 26, 2023 CP=     51.594<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   110   SUBSTEP     1  COMPLETED.    CUM ITER =    110
 *** TIME =   1.10000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.43       OSCILLATION LIMIT = 0.1843    <\/p>\n

 *** WARNING ***                         CP =      51.938   TIME= 14:14:50
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      52.016   TIME= 14:14:50
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:50  JAN 26, 2023 CP=     52.078<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   111   SUBSTEP     1  COMPLETED.    CUM ITER =    111
 *** TIME =   1.11000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.39       OSCILLATION LIMIT = 0.1839    <\/p>\n

 *** WARNING ***                         CP =      52.422   TIME= 14:14:51
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      52.469   TIME= 14:14:51
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:51  JAN 26, 2023 CP=     52.531<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   112   SUBSTEP     1  COMPLETED.    CUM ITER =    112
 *** TIME =   1.12000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.33       OSCILLATION LIMIT = 0.1833    <\/p>\n

 *** WARNING ***                         CP =      52.859   TIME= 14:14:51
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      52.906   TIME= 14:14:51
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:51  JAN 26, 2023 CP=     52.969<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   113   SUBSTEP     1  COMPLETED.    CUM ITER =    113
 *** TIME =   1.13000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.26       OSCILLATION LIMIT = 0.1826    <\/p>\n

 *** WARNING ***                         CP =      53.312   TIME= 14:14:52
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      53.344   TIME= 14:14:52
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:52  JAN 26, 2023 CP=     53.422<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   114   SUBSTEP     1  COMPLETED.    CUM ITER =    114
 *** TIME =   1.14000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.22       OSCILLATION LIMIT = 0.1822    <\/p>\n

 *** WARNING ***                         CP =      53.766   TIME= 14:14:52
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      53.828   TIME= 14:14:52
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:52  JAN 26, 2023 CP=     53.891<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   115   SUBSTEP     1  COMPLETED.    CUM ITER =    115
 *** TIME =   1.15000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.21       OSCILLATION LIMIT = 0.1821    <\/p>\n

 *** WARNING ***                         CP =      54.234   TIME= 14:14:53
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      54.281   TIME= 14:14:53
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:53  JAN 26, 2023 CP=     54.344<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   116   SUBSTEP     1  COMPLETED.    CUM ITER =    116
 *** TIME =   1.16000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.23       OSCILLATION LIMIT = 0.1823    <\/p>\n

 *** WARNING ***                         CP =      54.656   TIME= 14:14:53
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      54.781   TIME= 14:14:53
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:53  JAN 26, 2023 CP=     54.844<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   117   SUBSTEP     1  COMPLETED.    CUM ITER =    117
 *** TIME =   1.17000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.28       OSCILLATION LIMIT = 0.1828    <\/p>\n

 *** WARNING ***                         CP =      55.188   TIME= 14:14:53
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      55.250   TIME= 14:14:54
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:54  JAN 26, 2023 CP=     55.328<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   118   SUBSTEP     1  COMPLETED.    CUM ITER =    118
 *** TIME =   1.18000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.35       OSCILLATION LIMIT = 0.1835    <\/p>\n

 *** WARNING ***                         CP =      55.641   TIME= 14:14:54
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      55.688   TIME= 14:14:54
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:54  JAN 26, 2023 CP=     55.750<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   119   SUBSTEP     1  COMPLETED.    CUM ITER =    119
 *** TIME =   1.19000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.41       OSCILLATION LIMIT = 0.1841    <\/p>\n

 *** WARNING ***                         CP =      56.094   TIME= 14:14:54
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      56.141   TIME= 14:14:54
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:55  JAN 26, 2023 CP=     56.219<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   120   SUBSTEP     1  COMPLETED.    CUM ITER =    120
 *** TIME =   1.20000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.45       OSCILLATION LIMIT = 0.1845    <\/p>\n

 *** WARNING ***                         CP =      56.547   TIME= 14:14:55
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      56.609   TIME= 14:14:55
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:55  JAN 26, 2023 CP=     56.656<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   121   SUBSTEP     1  COMPLETED.    CUM ITER =    121
 *** TIME =   1.21000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.45       OSCILLATION LIMIT = 0.1845    <\/p>\n

 *** WARNING ***                         CP =      56.969   TIME= 14:14:55
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      57.062   TIME= 14:14:55
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:55  JAN 26, 2023 CP=     57.125<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   122   SUBSTEP     1  COMPLETED.    CUM ITER =    122
 *** TIME =   1.22000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.41       OSCILLATION LIMIT = 0.1841    <\/p>\n

 *** WARNING ***                         CP =      57.469   TIME= 14:14:56
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      57.531   TIME= 14:14:56
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:56  JAN 26, 2023 CP=     57.609<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   123   SUBSTEP     1  COMPLETED.    CUM ITER =    123
 *** TIME =   1.23000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.34       OSCILLATION LIMIT = 0.1834    <\/p>\n

 *** WARNING ***                         CP =      57.938   TIME= 14:14:56
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      58.016   TIME= 14:14:56
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:56  JAN 26, 2023 CP=     58.078<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   124   SUBSTEP     1  COMPLETED.    CUM ITER =    124
 *** TIME =   1.24000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.26       OSCILLATION LIMIT = 0.1826    <\/p>\n

 *** WARNING ***                         CP =      58.375   TIME= 14:14:57
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      58.422   TIME= 14:14:57
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:57  JAN 26, 2023 CP=     58.484<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   125   SUBSTEP     1  COMPLETED.    CUM ITER =    125
 *** TIME =   1.25000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.19       OSCILLATION LIMIT = 0.1819    <\/p>\n

 *** WARNING ***                         CP =      58.828   TIME= 14:14:57
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      58.875   TIME= 14:14:57
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:57  JAN 26, 2023 CP=     58.953<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   126   SUBSTEP     1  COMPLETED.    CUM ITER =    126
 *** TIME =   1.26000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.13       OSCILLATION LIMIT = 0.1813    <\/p>\n

 *** WARNING ***                         CP =      59.281   TIME= 14:14:58
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      59.375   TIME= 14:14:58
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:58  JAN 26, 2023 CP=     59.438<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   127   SUBSTEP     1  COMPLETED.    CUM ITER =    127
 *** TIME =   1.27000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.12       OSCILLATION LIMIT = 0.1812    <\/p>\n

 *** WARNING ***                         CP =      59.766   TIME= 14:14:58
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      59.875   TIME= 14:14:58
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:58  JAN 26, 2023 CP=     59.984<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   128   SUBSTEP     1  COMPLETED.    CUM ITER =    128
 *** TIME =   1.28000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.13       OSCILLATION LIMIT = 0.1813    <\/p>\n

 *** WARNING ***                         CP =      60.328   TIME= 14:14:59
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      60.359   TIME= 14:14:59
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:59  JAN 26, 2023 CP=     60.438<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   129   SUBSTEP     1  COMPLETED.    CUM ITER =    129
 *** TIME =   1.29000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.17       OSCILLATION LIMIT = 0.1817    <\/p>\n

 *** WARNING ***                         CP =      60.766   TIME= 14:14:59
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      60.828   TIME= 14:14:59
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:14:59  JAN 26, 2023 CP=     60.938<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   130   SUBSTEP     1  COMPLETED.    CUM ITER =    130
 *** TIME =   1.30000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.23       OSCILLATION LIMIT = 0.1823    <\/p>\n

 *** WARNING ***                         CP =      61.281   TIME= 14:14:59
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      61.344   TIME= 14:15:00
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:00  JAN 26, 2023 CP=     61.406<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   131   SUBSTEP     1  COMPLETED.    CUM ITER =    131
 *** TIME =   1.31000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.28       OSCILLATION LIMIT = 0.1828    <\/p>\n

 *** WARNING ***                         CP =      61.750   TIME= 14:15:00
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      61.797   TIME= 14:15:00
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:00  JAN 26, 2023 CP=     61.859<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   132   SUBSTEP     1  COMPLETED.    CUM ITER =    132
 *** TIME =   1.32000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.32       OSCILLATION LIMIT = 0.1832    <\/p>\n

 *** WARNING ***                         CP =      62.172   TIME= 14:15:00
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      62.250   TIME= 14:15:00
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:01  JAN 26, 2023 CP=     62.312<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   133   SUBSTEP     1  COMPLETED.    CUM ITER =    133
 *** TIME =   1.33000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.34       OSCILLATION LIMIT = 0.1834    <\/p>\n

 *** WARNING ***                         CP =      62.656   TIME= 14:15:01
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      62.719   TIME= 14:15:01
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:01  JAN 26, 2023 CP=     62.781<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   134   SUBSTEP     1  COMPLETED.    CUM ITER =    134
 *** TIME =   1.34000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.35       OSCILLATION LIMIT = 0.1835    <\/p>\n

 *** WARNING ***                         CP =      63.125   TIME= 14:15:01
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      63.219   TIME= 14:15:01
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:01  JAN 26, 2023 CP=     63.328<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   135   SUBSTEP     1  COMPLETED.    CUM ITER =    135
 *** TIME =   1.35000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.36       OSCILLATION LIMIT = 0.1836    <\/p>\n

 *** WARNING ***                         CP =      63.672   TIME= 14:15:02
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      63.734   TIME= 14:15:02
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:02  JAN 26, 2023 CP=     63.797<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   136   SUBSTEP     1  COMPLETED.    CUM ITER =    136
 *** TIME =   1.36000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.36       OSCILLATION LIMIT = 0.1836    <\/p>\n

 *** WARNING ***                         CP =      64.094   TIME= 14:15:02
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      64.250   TIME= 14:15:02
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:02  JAN 26, 2023 CP=     64.359<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   137   SUBSTEP     1  COMPLETED.    CUM ITER =    137
 *** TIME =   1.37000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.36       OSCILLATION LIMIT = 0.1836    <\/p>\n

 *** WARNING ***                         CP =      64.703   TIME= 14:15:03
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      64.766   TIME= 14:15:03
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:03  JAN 26, 2023 CP=     64.828<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   138   SUBSTEP     1  COMPLETED.    CUM ITER =    138
 *** TIME =   1.38000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.36       OSCILLATION LIMIT = 0.1836    <\/p>\n

 *** WARNING ***                         CP =      65.172   TIME= 14:15:03
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      65.234   TIME= 14:15:03
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:03  JAN 26, 2023 CP=     65.312<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   139   SUBSTEP     1  COMPLETED.    CUM ITER =    139
 *** TIME =   1.39000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.34       OSCILLATION LIMIT = 0.1834    <\/p>\n

 *** WARNING ***                         CP =      65.641   TIME= 14:15:04
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      65.734   TIME= 14:15:04
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:04  JAN 26, 2023 CP=     65.797<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   140   SUBSTEP     1  COMPLETED.    CUM ITER =    140
 *** TIME =   1.40000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.31       OSCILLATION LIMIT = 0.1831    <\/p>\n

 *** WARNING ***                         CP =      66.141   TIME= 14:15:04
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      66.172   TIME= 14:15:04
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:04  JAN 26, 2023 CP=     66.250<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   141   SUBSTEP     1  COMPLETED.    CUM ITER =    141
 *** TIME =   1.41000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.27       OSCILLATION LIMIT = 0.1827    <\/p>\n

 *** WARNING ***                         CP =      66.578   TIME= 14:15:05
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      66.641   TIME= 14:15:05
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:05  JAN 26, 2023 CP=     66.703<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   142   SUBSTEP     1  COMPLETED.    CUM ITER =    142
 *** TIME =   1.42000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.23       OSCILLATION LIMIT = 0.1823    <\/p>\n

 *** WARNING ***                         CP =      67.000   TIME= 14:15:05
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      67.062   TIME= 14:15:05
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:05  JAN 26, 2023 CP=     67.125<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   143   SUBSTEP     1  COMPLETED.    CUM ITER =    143
 *** TIME =   1.43000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.18       OSCILLATION LIMIT = 0.1818    <\/p>\n

 *** WARNING ***                         CP =      67.469   TIME= 14:15:05
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      67.500   TIME= 14:15:06
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:06  JAN 26, 2023 CP=     67.578<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   144   SUBSTEP     1  COMPLETED.    CUM ITER =    144
 *** TIME =   1.44000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.14       OSCILLATION LIMIT = 0.1814    <\/p>\n

 *** WARNING ***                         CP =      67.906   TIME= 14:15:06
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      67.984   TIME= 14:15:06
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:06  JAN 26, 2023 CP=     68.047<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   145   SUBSTEP     1  COMPLETED.    CUM ITER =    145
 *** TIME =   1.45000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.11       OSCILLATION LIMIT = 0.1811    <\/p>\n

 *** WARNING ***                         CP =      68.391   TIME= 14:15:06
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      68.453   TIME= 14:15:06
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:07  JAN 26, 2023 CP=     68.516<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   146   SUBSTEP     1  COMPLETED.    CUM ITER =    146
 *** TIME =   1.46000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.11       OSCILLATION LIMIT = 0.1811    <\/p>\n

 *** WARNING ***                         CP =      68.859   TIME= 14:15:07
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      68.891   TIME= 14:15:07
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:07  JAN 26, 2023 CP=     68.969<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   147   SUBSTEP     1  COMPLETED.    CUM ITER =    147
 *** TIME =   1.47000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.12       OSCILLATION LIMIT = 0.1812    <\/p>\n

 *** WARNING ***                         CP =      69.281   TIME= 14:15:07
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      69.344   TIME= 14:15:07
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:07  JAN 26, 2023 CP=     69.406<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   148   SUBSTEP     1  COMPLETED.    CUM ITER =    148
 *** TIME =   1.48000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.14       OSCILLATION LIMIT = 0.1814    <\/p>\n

 *** WARNING ***                         CP =      69.750   TIME= 14:15:08
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      69.812   TIME= 14:15:08
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:08  JAN 26, 2023 CP=     69.891<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   149   SUBSTEP     1  COMPLETED.    CUM ITER =    149
 *** TIME =   1.49000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.16       OSCILLATION LIMIT = 0.1816    <\/p>\n

 *** WARNING ***                         CP =      70.219   TIME= 14:15:08
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      70.266   TIME= 14:15:08
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:08  JAN 26, 2023 CP=     70.328<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   150   SUBSTEP     1  COMPLETED.    CUM ITER =    150
 *** TIME =   1.50000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.15       OSCILLATION LIMIT = 0.1815    <\/p>\n

 *** WARNING ***                         CP =      70.609   TIME= 14:15:09
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      70.734   TIME= 14:15:09
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:09  JAN 26, 2023 CP=     70.797<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   151   SUBSTEP     1  COMPLETED.    CUM ITER =    151
 *** TIME =   1.51000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.12       OSCILLATION LIMIT = 0.1812    <\/p>\n

 *** WARNING ***                         CP =      71.141   TIME= 14:15:09
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      71.203   TIME= 14:15:09
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:09  JAN 26, 2023 CP=     71.281<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   152   SUBSTEP     1  COMPLETED.    CUM ITER =    152
 *** TIME =   1.52000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.06       OSCILLATION LIMIT = 0.1806    <\/p>\n

 *** WARNING ***                         CP =      71.609   TIME= 14:15:10
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      71.656   TIME= 14:15:10
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:10  JAN 26, 2023 CP=     71.719<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   153   SUBSTEP     1  COMPLETED.    CUM ITER =    153
 *** TIME =   1.53000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.01       OSCILLATION LIMIT = 0.1801    <\/p>\n

 *** WARNING ***                         CP =      72.062   TIME= 14:15:10
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      72.125   TIME= 14:15:10
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:10  JAN 26, 2023 CP=     72.203<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   154   SUBSTEP     1  COMPLETED.    CUM ITER =    154
 *** TIME =   1.54000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.98       OSCILLATION LIMIT = 0.1798    <\/p>\n

 *** WARNING ***                         CP =      72.531   TIME= 14:15:11
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      72.625   TIME= 14:15:11
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:11  JAN 26, 2023 CP=     72.688<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   155   SUBSTEP     1  COMPLETED.    CUM ITER =    155
 *** TIME =   1.55000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.99       OSCILLATION LIMIT = 0.1799    <\/p>\n

 *** WARNING ***                         CP =      73.016   TIME= 14:15:11
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      73.156   TIME= 14:15:11
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:11  JAN 26, 2023 CP=     73.266<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   156   SUBSTEP     1  COMPLETED.    CUM ITER =    156
 *** TIME =   1.56000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.02       OSCILLATION LIMIT = 0.1802    <\/p>\n

 *** WARNING ***                         CP =      73.609   TIME= 14:15:11
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      73.641   TIME= 14:15:12
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:12  JAN 26, 2023 CP=     73.719<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   157   SUBSTEP     1  COMPLETED.    CUM ITER =    157
 *** TIME =   1.57000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.07       OSCILLATION LIMIT = 0.1807    <\/p>\n

 *** WARNING ***                         CP =      74.031   TIME= 14:15:12
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      74.078   TIME= 14:15:12
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:12  JAN 26, 2023 CP=     74.141<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   158   SUBSTEP     1  COMPLETED.    CUM ITER =    158
 *** TIME =   1.58000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.10       OSCILLATION LIMIT = 0.1810    <\/p>\n

 *** WARNING ***                         CP =      74.469   TIME= 14:15:12
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      74.531   TIME= 14:15:12
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:12  JAN 26, 2023 CP=     74.594<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   159   SUBSTEP     1  COMPLETED.    CUM ITER =    159
 *** TIME =   1.59000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.10       OSCILLATION LIMIT = 0.1810    <\/p>\n

 *** WARNING ***                         CP =      74.938   TIME= 14:15:13
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      74.969   TIME= 14:15:13
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:13  JAN 26, 2023 CP=     75.047<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   160   SUBSTEP     1  COMPLETED.    CUM ITER =    160
 *** TIME =   1.60000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.06       OSCILLATION LIMIT = 0.1806    <\/p>\n

 *** WARNING ***                         CP =      75.375   TIME= 14:15:13
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      75.484   TIME= 14:15:13
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:13  JAN 26, 2023 CP=     75.547<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   161   SUBSTEP     1  COMPLETED.    CUM ITER =    161
 *** TIME =   1.61000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.99       OSCILLATION LIMIT = 0.1799    <\/p>\n

 *** WARNING ***                         CP =      75.922   TIME= 14:15:14
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      76.031   TIME= 14:15:14
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:14  JAN 26, 2023 CP=     76.109<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   162   SUBSTEP     1  COMPLETED.    CUM ITER =    162
 *** TIME =   1.62000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.92       OSCILLATION LIMIT = 0.1792    <\/p>\n

 *** WARNING ***                         CP =      76.438   TIME= 14:15:14
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      76.500   TIME= 14:15:14
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:14  JAN 26, 2023 CP=     76.578<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   163   SUBSTEP     1  COMPLETED.    CUM ITER =    163
 *** TIME =   1.63000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.88       OSCILLATION LIMIT = 0.1788    <\/p>\n

 *** WARNING ***                         CP =      76.906   TIME= 14:15:15
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      77.031   TIME= 14:15:15
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:15  JAN 26, 2023 CP=     77.094<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   164   SUBSTEP     1  COMPLETED.    CUM ITER =    164
 *** TIME =   1.64000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.88       OSCILLATION LIMIT = 0.1788    <\/p>\n

 *** WARNING ***                         CP =      77.438   TIME= 14:15:15
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      77.500   TIME= 14:15:15
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:15  JAN 26, 2023 CP=     77.562<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   165   SUBSTEP     1  COMPLETED.    CUM ITER =    165
 *** TIME =   1.65000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.93       OSCILLATION LIMIT = 0.1793    <\/p>\n

 *** WARNING ***                         CP =      77.906   TIME= 14:15:16
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      77.969   TIME= 14:15:16
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:16  JAN 26, 2023 CP=     78.031<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   166   SUBSTEP     1  COMPLETED.    CUM ITER =    166
 *** TIME =   1.66000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.02       OSCILLATION LIMIT = 0.1802    <\/p>\n

 *** WARNING ***                         CP =      78.375   TIME= 14:15:16
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      78.422   TIME= 14:15:16
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:16  JAN 26, 2023 CP=     78.484<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   167   SUBSTEP     1  COMPLETED.    CUM ITER =    167
 *** TIME =   1.67000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.12       OSCILLATION LIMIT = 0.1812    <\/p>\n

 *** WARNING ***                         CP =      78.797   TIME= 14:15:17
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      78.844   TIME= 14:15:17
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:17  JAN 26, 2023 CP=     78.906<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   168   SUBSTEP     1  COMPLETED.    CUM ITER =    168
 *** TIME =   1.68000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.22       OSCILLATION LIMIT = 0.1822    <\/p>\n

 *** WARNING ***                         CP =      79.250   TIME= 14:15:17
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      79.312   TIME= 14:15:17
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:17  JAN 26, 2023 CP=     79.391<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   169   SUBSTEP     1  COMPLETED.    CUM ITER =    169
 *** TIME =   1.69000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.31       OSCILLATION LIMIT = 0.1831    <\/p>\n

 *** WARNING ***                         CP =      79.719   TIME= 14:15:17
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      79.781   TIME= 14:15:18
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:18  JAN 26, 2023 CP=     79.844<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   170   SUBSTEP     1  COMPLETED.    CUM ITER =    170
 *** TIME =   1.70000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.36       OSCILLATION LIMIT = 0.1836    <\/p>\n

 *** WARNING ***                         CP =      80.188   TIME= 14:15:18
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      80.266   TIME= 14:15:18
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:18  JAN 26, 2023 CP=     80.328<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   171   SUBSTEP     1  COMPLETED.    CUM ITER =    171
 *** TIME =   1.71000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.38       OSCILLATION LIMIT = 0.1838    <\/p>\n

 *** WARNING ***                         CP =      80.672   TIME= 14:15:18
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      80.766   TIME= 14:15:19
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:19  JAN 26, 2023 CP=     80.844<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   172   SUBSTEP     1  COMPLETED.    CUM ITER =    172
 *** TIME =   1.72000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.37       OSCILLATION LIMIT = 0.1837    <\/p>\n

 *** WARNING ***                         CP =      81.172   TIME= 14:15:19
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      81.219   TIME= 14:15:19
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:19  JAN 26, 2023 CP=     81.281<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   173   SUBSTEP     1  COMPLETED.    CUM ITER =    173
 *** TIME =   1.73000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.34       OSCILLATION LIMIT = 0.1834    <\/p>\n

 *** WARNING ***                         CP =      81.625   TIME= 14:15:19
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      81.688   TIME= 14:15:19
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:19  JAN 26, 2023 CP=     81.766<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   174   SUBSTEP     1  COMPLETED.    CUM ITER =    174
 *** TIME =   1.74000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.31       OSCILLATION LIMIT = 0.1831    <\/p>\n

 *** WARNING ***                         CP =      82.094   TIME= 14:15:20
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      82.141   TIME= 14:15:20
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:20  JAN 26, 2023 CP=     82.203<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   175   SUBSTEP     1  COMPLETED.    CUM ITER =    175
 *** TIME =   1.75000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.28       OSCILLATION LIMIT = 0.1828    <\/p>\n

 *** WARNING ***                         CP =      82.531   TIME= 14:15:20
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      82.562   TIME= 14:15:20
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:20  JAN 26, 2023 CP=     82.672<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   176   SUBSTEP     1  COMPLETED.    CUM ITER =    176
 *** TIME =   1.76000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.26       OSCILLATION LIMIT = 0.1826    <\/p>\n

 *** WARNING ***                         CP =      83.016   TIME= 14:15:21
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      83.062   TIME= 14:15:21
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:21  JAN 26, 2023 CP=     83.141<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   177   SUBSTEP     1  COMPLETED.    CUM ITER =    177
 *** TIME =   1.77000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.26       OSCILLATION LIMIT = 0.1826    <\/p>\n

 *** WARNING ***                         CP =      83.469   TIME= 14:15:21
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      83.547   TIME= 14:15:21
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:21  JAN 26, 2023 CP=     83.609<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   178   SUBSTEP     1  COMPLETED.    CUM ITER =    178
 *** TIME =   1.78000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.27       OSCILLATION LIMIT = 0.1827    <\/p>\n

 *** WARNING ***                         CP =      83.938   TIME= 14:15:22
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      84.031   TIME= 14:15:22
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:22  JAN 26, 2023 CP=     84.094<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   179   SUBSTEP     1  COMPLETED.    CUM ITER =    179
 *** TIME =   1.79000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.28       OSCILLATION LIMIT = 0.1828    <\/p>\n

 *** WARNING ***                         CP =      84.438   TIME= 14:15:22
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      84.531   TIME= 14:15:22
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:22  JAN 26, 2023 CP=     84.594<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   180   SUBSTEP     1  COMPLETED.    CUM ITER =    180
 *** TIME =   1.80000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.29       OSCILLATION LIMIT = 0.1829    <\/p>\n

 *** WARNING ***                         CP =      84.922   TIME= 14:15:23
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      84.969   TIME= 14:15:23
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:23  JAN 26, 2023 CP=     85.031<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   181   SUBSTEP     1  COMPLETED.    CUM ITER =    181
 *** TIME =   1.81000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.30       OSCILLATION LIMIT = 0.1830    <\/p>\n

 *** WARNING ***                         CP =      85.375   TIME= 14:15:23
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      85.453   TIME= 14:15:23
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:23  JAN 26, 2023 CP=     85.516<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   182   SUBSTEP     1  COMPLETED.    CUM ITER =    182
 *** TIME =   1.82000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.31       OSCILLATION LIMIT = 0.1831    <\/p>\n

 *** WARNING ***                         CP =      85.844   TIME= 14:15:23
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      85.906   TIME= 14:15:24
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:24  JAN 26, 2023 CP=     85.969<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   183   SUBSTEP     1  COMPLETED.    CUM ITER =    183
 *** TIME =   1.83000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.31       OSCILLATION LIMIT = 0.1831    <\/p>\n

 *** WARNING ***                         CP =      86.297   TIME= 14:15:24
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      86.344   TIME= 14:15:24
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:24  JAN 26, 2023 CP=     86.422<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   184   SUBSTEP     1  COMPLETED.    CUM ITER =    184
 *** TIME =   1.84000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.28       OSCILLATION LIMIT = 0.1828    <\/p>\n

 *** WARNING ***                         CP =      86.750   TIME= 14:15:24
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      86.828   TIME= 14:15:24
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:25  JAN 26, 2023 CP=     86.891<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   185   SUBSTEP     1  COMPLETED.    CUM ITER =    185
 *** TIME =   1.85000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.23       OSCILLATION LIMIT = 0.1823    <\/p>\n

 *** WARNING ***                         CP =      87.203   TIME= 14:15:25
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      87.281   TIME= 14:15:25
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:25  JAN 26, 2023 CP=     87.391<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   186   SUBSTEP     1  COMPLETED.    CUM ITER =    186
 *** TIME =   1.86000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.14       OSCILLATION LIMIT = 0.1814    <\/p>\n

 *** WARNING ***                         CP =      87.719   TIME= 14:15:25
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      87.797   TIME= 14:15:25
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:25  JAN 26, 2023 CP=     87.859<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   187   SUBSTEP     1  COMPLETED.    CUM ITER =    187
 *** TIME =   1.87000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.04       OSCILLATION LIMIT = 0.1804    <\/p>\n

 *** WARNING ***                         CP =      88.203   TIME= 14:15:26
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      88.266   TIME= 14:15:26
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:26  JAN 26, 2023 CP=     88.344<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   188   SUBSTEP     1  COMPLETED.    CUM ITER =    188
 *** TIME =   1.88000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.95       OSCILLATION LIMIT = 0.1795    <\/p>\n

 *** WARNING ***                         CP =      88.656   TIME= 14:15:26
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      88.750   TIME= 14:15:26
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:26  JAN 26, 2023 CP=     88.812<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   189   SUBSTEP     1  COMPLETED.    CUM ITER =    189
 *** TIME =   1.89000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.90       OSCILLATION LIMIT = 0.1790    <\/p>\n

 *** WARNING ***                         CP =      89.141   TIME= 14:15:27
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      89.172   TIME= 14:15:27
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:27  JAN 26, 2023 CP=     89.250<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   190   SUBSTEP     1  COMPLETED.    CUM ITER =    190
 *** TIME =   1.90000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.93       OSCILLATION LIMIT = 0.1793    <\/p>\n

 *** WARNING ***                         CP =      89.578   TIME= 14:15:27
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      89.625   TIME= 14:15:27
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:27  JAN 26, 2023 CP=     89.688<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   191   SUBSTEP     1  COMPLETED.    CUM ITER =    191
 *** TIME =   1.91000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.03       OSCILLATION LIMIT = 0.1803    <\/p>\n

 *** WARNING ***                         CP =      90.016   TIME= 14:15:28
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      90.109   TIME= 14:15:28
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:28  JAN 26, 2023 CP=     90.172<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   192   SUBSTEP     1  COMPLETED.    CUM ITER =    192
 *** TIME =   1.92000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.18       OSCILLATION LIMIT = 0.1818    <\/p>\n

 *** WARNING ***                         CP =      90.516   TIME= 14:15:28
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      90.562   TIME= 14:15:28
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:28  JAN 26, 2023 CP=     90.625<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   193   SUBSTEP     1  COMPLETED.    CUM ITER =    193
 *** TIME =   1.93000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.34       OSCILLATION LIMIT = 0.1834    <\/p>\n

 *** WARNING ***                         CP =      90.938   TIME= 14:15:29
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      91.016   TIME= 14:15:29
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:29  JAN 26, 2023 CP=     91.094<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   194   SUBSTEP     1  COMPLETED.    CUM ITER =    194
 *** TIME =   1.94000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.48       OSCILLATION LIMIT = 0.1848    <\/p>\n

 *** WARNING ***                         CP =      91.422   TIME= 14:15:29
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      91.484   TIME= 14:15:29
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:29  JAN 26, 2023 CP=     91.562<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   195   SUBSTEP     1  COMPLETED.    CUM ITER =    195
 *** TIME =   1.95000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.54       OSCILLATION LIMIT = 0.1854    <\/p>\n

 *** WARNING ***                         CP =      91.891   TIME= 14:15:29
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      92.000   TIME= 14:15:30
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:30  JAN 26, 2023 CP=     92.062<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   196   SUBSTEP     1  COMPLETED.    CUM ITER =    196
 *** TIME =   1.96000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.52       OSCILLATION LIMIT = 0.1852    <\/p>\n

 *** WARNING ***                         CP =      92.391   TIME= 14:15:30
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      92.484   TIME= 14:15:30
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:30  JAN 26, 2023 CP=     92.547<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   197   SUBSTEP     1  COMPLETED.    CUM ITER =    197
 *** TIME =   1.97000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.43       OSCILLATION LIMIT = 0.1843    <\/p>\n

 *** WARNING ***                         CP =      92.891   TIME= 14:15:30
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      92.922   TIME= 14:15:30
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:30  JAN 26, 2023 CP=     93.000<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   198   SUBSTEP     1  COMPLETED.    CUM ITER =    198
 *** TIME =   1.98000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.29       OSCILLATION LIMIT = 0.1829    <\/p>\n

 *** WARNING ***                         CP =      93.328   TIME= 14:15:31
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      93.391   TIME= 14:15:31
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:31  JAN 26, 2023 CP=     93.453<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   199   SUBSTEP     1  COMPLETED.    CUM ITER =    199
 *** TIME =   1.99000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  18.14       OSCILLATION LIMIT = 0.1814    <\/p>\n

 *** WARNING ***                         CP =      93.797   TIME= 14:15:31
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      93.828   TIME= 14:15:31
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:31  JAN 26, 2023 CP=     93.891<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   200   SUBSTEP     1  COMPLETED.    CUM ITER =    200
 *** TIME =   2.00000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.99       OSCILLATION LIMIT = 0.1799    <\/p>\n

 *** WARNING ***                         CP =      94.234   TIME= 14:15:32
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 *****  MAPDL SOLVE    COMMAND  *****<\/p>\n

 *** WARNING ***                         CP =      94.266   TIME= 14:15:32
 Material number 2 (used by element 19193) should normally have at least 
 one MP or one TB type command associated with it.  Output of energy by  
 material may not be available.                                          <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:32  JAN 26, 2023 CP=     94.344<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

 SOLUTION MONITORING INFO IS WRITTEN TO FILE= file.mntr                                                                                                                                                                                                                                                           <\/p>\n

 *** LOAD STEP   201   SUBSTEP     1  COMPLETED.    CUM ITER =    201
 *** TIME =   2.01000         TIME INC =  0.100000E-01  NEW TRIANG MATRIX
 *** RESPONSE EIGENVALUE =  17.88       OSCILLATION LIMIT = 0.1788    <\/p>\n

 *** WARNING ***                         CP =      94.672   TIME= 14:15:32
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 SET PARAMETER DIMENSIONS ON  VARY_LD TYPE=ARRA  DIMENSIONS= 24107     1     1<\/p>\n

 *** WARNING ***                         CP =      94.672   TIME= 14:15:32
 Parameter VARY_LD already exists.  It is deleted and redefined by the   
 *DIM command.                                                           <\/p>\n

 SELECT       FOR ITEM=TYPE COMPONENT=    
  IN RANGE         3 TO          3 STEP          1<\/p>\n

       2204  ELEMENTS (OF      21396  DEFINED) SELECTED BY  ESEL  COMMAND.<\/p>\n

 SELECT      ALL NODES HAVING ANY ELEMENT IN ELEMENT SET.<\/p>\n

       4549 NODES (OF      24107  DEFINED) SELECTED FROM
     2204 SELECTED ELEMENTS BY NSLE COMMAND.<\/p>\n

 DELETE SPECIFIED SURFACE LOAD HFLU FOR ALL SELECTED ELEMENTS- ALL LKEY<\/p>\n

 NUMBER OF HFLU SURFACE LOADS DELETED=    2204<\/p>\n

 SELECT ALL ENTITIES OF TYPE= ALL  AND BELOW
  END OF MOVING HEAT FLUX<\/p>\n

 USE AUTOMATIC TIME STEPPING THIS LOAD STEP<\/p>\n

 USE      20 SUBSTEPS INITIALLY THIS LOAD STEP FOR ALL  DEGREES OF FREEDOM
 FOR AUTOMATIC TIME STEPPING:
   USE 100000000 SUBSTEPS AS A MAXIMUM
   USE     20 SUBSTEPS AS A MINIMUM<\/p>\n

 INCLUDE TRANSIENT EFFECTS FOR  ALL DEGREES OF FREEDOM THIS LOAD STEP<\/p>\n

 TIME=  4.0000    
  
 *********** Moving Heat Flux: Moving Heat Flux 2 ***********
  <\/p>\n

 FINISH SOLUTION PROCESSING<\/p>\n

 ***** ROUTINE COMPLETED *****  CP =        97.969<\/p>\n

 <\/p>\n

 *** MAPDL – ENGINEERING ANALYSIS SYSTEM  RELEASE 2023 R1          23.1     ***
 Ansys Mechanical Enterprise Academic Student      
 01055371  VERSION=WINDOWS x64   14:15:36  JAN 26, 2023 CP=     97.969<\/p>\n

 wbnew–Transient Thermal (A5)                                                 <\/p>\n

 <\/p>\n

          ***** MAPDL ANALYSIS DEFINITION (PREP7) *****
 CMBLOCK read of NODE component FACE1     completed
 CMBLOCK read of NODE component PATH1     completed
 CMBLOCK read of NODE component START1    completed
 You have already entered the general preprocessor (PREP7).              <\/p>\n

 SELECT ALL ENTITIES OF TYPE= ALL  AND BELOW<\/p>\n

 PARAMETER INX =     1.000000000    <\/p>\n

 PARAMETER LSTP =     200.0000000    <\/p>\n

 *** ERROR ***                           CP =      97.969   TIME= 14:15:36
 Parameter LSTP needs subscripts.                                        <\/p>\n

 NUMBER OF WARNING MESSAGES ENCOUNTERED=        408
 NUMBER OF ERROR   MESSAGES ENCOUNTERED=          1<\/p>\n

+——————— M A P D L   S T A T I S T I C S ————————+<\/p>\n

Release: 2023 R1            Build: 23.1       Update: UP20221128   Platform: WINDOWS x64 
Date Run: 01\/26\/2023   Time: 14:15     Process ID: 6224
Operating System: Windows 10  (Build: 19044)<\/p>\n

Processor Model: 12th Gen Intel(R) Core(TM) i7-12700H<\/p>\n

Compiler: Intel(R) Fortran Compiler Version 19.0.5  (Build: 20190815)
          Intel(R) C\/C++ Compiler Version 19.0.5  (Build: 20190815)
          Intel(R) Math Kernel Library Version 2020.0.0 Product Build 20191125
          BLAS Library supplied by Intel(R) MKL<\/p>\n

Number of machines requested            :    1
Total number of cores available         :   20
Number of physical cores available      :   14
Number of processes requested           :    4
Number of threads per process requested :    1
Total number of cores requested         :    4 (Distributed Memory Parallel)               
MPI Type: INTELMPI
MPI Version: Intel(R) MPI Library 2021.5 for Windows* OS<\/p>\n

GPU Acceleration: Not Requested<\/p>\n

Job Name: file0
Input File: dummy.dat<\/p>\n

  Core                Machine Name   Working Directory
 —————————————————–
     0             DESKTOP-KV8LMEO   C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\_ProjectScratch\\ScrE60B
     1             DESKTOP-KV8LMEO   C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\_ProjectScratch\\ScrE60B
     2             DESKTOP-KV8LMEO   C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\_ProjectScratch\\ScrE60B
     3             DESKTOP-KV8LMEO   C:\\Users\\candt\\AppData\\Local\\Temp\\WB_candt_12860_2\\_ProjectScratch\\ScrE60B
 
Latency time from master to core     1 =    2.015 microseconds
Latency time from master to core     2 =    3.645 microseconds
Latency time from master to core     3 =    3.607 microseconds
 
Communication speed from master to core     1 = 12660.23 MB\/sec
Communication speed from master to core     2 = 10193.81 MB\/sec
Communication speed from master to core     3 =  7956.56 MB\/sec<\/p>\n

Total CPU time for main thread                    :       94.4 seconds
Total CPU time summed for all threads             :       98.0 seconds<\/p>\n

Elapsed time spent obtaining a license            :        0.5 seconds
Elapsed time spent pre-processing model (\/PREP7)  :        0.1 seconds
Elapsed time spent solution – preprocessing       :       18.2 seconds
Elapsed time spent computing solution             :       64.1 seconds
Elapsed time spent solution – postprocessing      :        3.5 seconds
Elapsed time spent post-processing model (\/POST1) :        0.0 seconds
 
Equation solver used                              :            Sparse (symmetric)
Equation solver computational rate                :       18.3 Gflops<\/p>\n

Sum of memory used on all processes               :      768.0 MB
Sum of memory allocated on all processes          :     5184.0 MB
Physical memory available                         :         16 GB<\/p>\n

Total amount of I\/O written to disk               :        1.8 GB
Total amount of I\/O read from disk                :        1.0 GB<\/p>\n

+—————— E N D   M A P D L   S T A T I S T I C S ——————-+<\/p>\n

 *—————————————————————————–*
 |                                                                             |
 |                               RUN COMPLETED                                 |
 |                                                                             |
 |—————————————————————————–|
 |                                                                             |
 |  Ansys MAPDL 2023 R1         Build 23.1         UP20221128    WINDOWS x64   |
 |                                                                             |
 |—————————————————————————–|
 |                                                                             |
 |  Database Requested(-db)     1024 MB     Scratch Memory Requested   1024 MB |
 |  Max Database Used(Master)     63 MB     Max Scratch Used(Master)    183 MB |
 |  Max Database Used(Workers)     1 MB     Max Scratch Used(Workers)   173 MB |
 |  Sum Database Used(All)        66 MB     Sum Scratch Used(All)       702 MB |
 |                                                                             |
 |—————————————————————————–|
 |                                                                             |
 |        CP Time      (sec) =         97.984       Time  =  14:15:36          |
 |        Elapsed Time (sec) =         98.000       Date  =  01\/26\/2023        |
 |                                                                             |
 *—————————————————————————–*<\/p>\n

 <\/p>\n

 All <\/p>\n","protected":false},"template":"","class_list":["post-247516","topic","type-topic","status-closed","hentry","topic-tag-transientthermal-2"],"aioseo_notices":[],"acf":[],"custom_fields":[{"0":{"_bbp_subscription":["273436","50680"],"_bbp_author_ip":["23.56.168.214"]," _bbp_last_reply_id":["0"]," _bbp_likes_count":["0"],"_btv_view_count":["1332"],"_bbp_topic_status":["unanswered"],"_bbp_status":["publish"],"_bbp_topic_id":["247516"],"_bbp_forum_id":["27792"],"_bbp_engagement":["50680","273436"],"_bbp_voice_count":["2"],"_bbp_reply_count":["1"],"_bbp_last_reply_id":["247777"],"_bbp_last_active_id":["247777"],"_bbp_last_active_time":["2023-01-27 21:54:57"]},"test":"candt255knu-ac-kr"}],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics\/247516","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/types\/topic"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/topics\/247516\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/media?parent=247516"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}