{"id":235235,"date":"2022-09-14T14:55:59","date_gmt":"2022-09-14T14:55:59","guid":{"rendered":"\/forum\/forums\/reply\/235235\/"},"modified":"2022-09-14T14:55:59","modified_gmt":"2022-09-14T14:55:59","slug":"235235","status":"publish","type":"reply","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/","title":{"rendered":"Reply To: problem in the situation of inclined incidence with plane wave source"},"content":{"rendered":"<p>&lt;p&gt;Since the incident angle is 80 deg, you may need to check if there is any higher order diffraction that creates close to 90 deg orders. In addition, not only PML, but also the source injection can have errors. I would suggest&lt;\/p&gt;&lt;p&gt;1: use 48 or 64 layers of PML&lt;\/p&gt;&lt;p&gt;2: use smaller autothustoff min, eg, 1e-6 or smaller&lt;\/p&gt;&lt;p&gt;3: use longer simulation time to let the autoshutoff min to terminate the simulation.&lt;\/p&gt;&lt;p&gt;4: set the source in time domain with pulse length 50fs and off 100fs, or 100fs\/200fs. This is because the injected pulse is still broadband, and other wavelength may have resonance. Please use a time monitor and check if there is resonance at other wavelength.&lt;\/p&gt;&lt;p&gt;Large incident angle simulation is challenge.&lt;\/p&gt;<\/p>\n","protected":false},"template":"","class_list":["post-235235","reply","type-reply","status-publish","hentry"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"Since the incident angle is 80 deg, you may need to check if there is any higher order diffraction that creates close to 90 deg orders. In addition, not only PML, but also the source injection can have errors. I would suggest1: use 48 or 64 layers of PML2: use smaller autothustoff min, eg, 1e-6\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Learning Forum | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Reply To: problem in the situation of inclined incidence with plane wave source | Ansys Learning Forum\" \/>\n\t\t<meta property=\"og:description\" content=\"Since the incident angle is 80 deg, you may need to check if there is any higher order diffraction that creates close to 90 deg orders. In addition, not only PML, but also the source injection can have errors. I would suggest1: use 48 or 64 layers of PML2: use smaller autothustoff min, eg, 1e-6\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2022-09-14T14:55:59+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2022-09-14T14:55:59+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Reply To: problem in the situation of inclined incidence with plane wave source | Ansys Learning Forum\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Since the incident angle is 80 deg, you may need to check if there is any higher order diffraction that creates close to 90 deg orders. In addition, not only PML, but also the source injection can have errors. I would suggest1: use 48 or 64 layers of PML2: use smaller autothustoff min, eg, 1e-6\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/235235\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/235235\\\/#listItem\",\"name\":\"Reply To: problem in the situation of inclined incidence with plane wave source\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/235235\\\/#listItem\",\"position\":2,\"name\":\"Reply To: problem in the situation of inclined incidence with plane wave source\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum#listItem\",\"name\":\"Home\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#organization\",\"name\":\"Ansys Learning Forum\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/235235\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/235235\\\/\",\"name\":\"Reply To: problem in the situation of inclined incidence with plane wave source | Ansys Learning Forum\",\"description\":\"Since the incident angle is 80 deg, you may need to check if there is any higher order diffraction that creates close to 90 deg orders. In addition, not only PML, but also the source injection can have errors. I would suggest1: use 48 or 64 layers of PML2: use smaller autothustoff min, eg, 1e-6\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/235235\\\/#breadcrumblist\"},\"datePublished\":\"2022-09-14T14:55:59+00:00\",\"dateModified\":\"2022-09-14T14:55:59+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/\",\"name\":\"Ansys Learning Forum\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"Reply To: problem in the situation of inclined incidence with plane wave source | Ansys Learning Forum","description":"Since the incident angle is 80 deg, you may need to check if there is any higher order diffraction that creates close to 90 deg orders. In addition, not only PML, but also the source injection can have errors. I would suggest1: use 48 or 64 layers of PML2: use smaller autothustoff min, eg, 1e-6","canonical_url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/forum","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/#listItem","name":"Reply To: problem in the situation of inclined incidence with plane wave source"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/#listItem","position":2,"name":"Reply To: problem in the situation of inclined incidence with plane wave source","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum#listItem","name":"Home"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/forum\/#organization","name":"Ansys Learning Forum","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/forum\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/#webpage","url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/","name":"Reply To: problem in the situation of inclined incidence with plane wave source | Ansys Learning Forum","description":"Since the incident angle is 80 deg, you may need to check if there is any higher order diffraction that creates close to 90 deg orders. In addition, not only PML, but also the source injection can have errors. I would suggest1: use 48 or 64 layers of PML2: use smaller autothustoff min, eg, 1e-6","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/#breadcrumblist"},"datePublished":"2022-09-14T14:55:59+00:00","dateModified":"2022-09-14T14:55:59+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/forum\/#website","url":"https:\/\/innovationspace.ansys.com\/forum\/","name":"Ansys Learning Forum","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Learning Forum | Ansys Innovation Space","og:type":"article","og:title":"Reply To: problem in the situation of inclined incidence with plane wave source | Ansys Learning Forum","og:description":"Since the incident angle is 80 deg, you may need to check if there is any higher order diffraction that creates close to 90 deg orders. In addition, not only PML, but also the source injection can have errors. I would suggest1: use 48 or 64 layers of PML2: use smaller autothustoff min, eg, 1e-6","og:url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/","article:published_time":"2022-09-14T14:55:59+00:00","article:modified_time":"2022-09-14T14:55:59+00:00","twitter:card":"summary_large_image","twitter:title":"Reply To: problem in the situation of inclined incidence with plane wave source | Ansys Learning Forum","twitter:description":"Since the incident angle is 80 deg, you may need to check if there is any higher order diffraction that creates close to 90 deg orders. In addition, not only PML, but also the source injection can have errors. I would suggest1: use 48 or 64 layers of PML2: use smaller autothustoff min, eg, 1e-6"},"aioseo_meta_data":{"post_id":"235235","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"content","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":true,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2024-10-28 19:04:01","updated":"2026-08-12 01:47:49","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/forum\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tReply To: problem in the situation of inclined incidence with plane wave source\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/forum"},{"label":"Reply To: problem in the situation of inclined incidence with plane wave source","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/235235\/"}],"acf":[],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies\/235235","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/types\/reply"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies\/235235\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/media?parent=235235"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}