{"id":199617,"date":"2022-03-28T11:19:42","date_gmt":"2022-03-28T11:19:42","guid":{"rendered":"\/forum\/forums\/reply\/199617\/"},"modified":"2022-03-28T11:22:57","modified_gmt":"2022-03-28T11:22:57","slug":"199617","status":"publish","type":"reply","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/","title":{"rendered":"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug"},"content":{"rendered":"<p>First you would have to change the joint type to one that has two axes because a Revolute joint has only one axis.  Try a Universal Joint. Then see if you can apply a Joint Load about two axes. I don&#8217;t know.<br \/>\nAlternatively, you can definitely put two Revolute Joints in series and have a dummy body between them.<br \/>\nBelow is an illustration of a beam with one end fixed and the other end with a Revolute Joint plus a Joint Moment and a beam with a Revolute Joint on each end with opposite joint moments applied.<br \/>\n<img loading=\"lazy\" decoding=\"async\" src=\"\/forum\/wp-content\/uploads\/forum-uploads\/832\/A6I8EXU1OINF.png\" width=\"472\" height=\"152\" \/>The deformation along the length is clearly not the same. But as long as the Revolute Joint at each end had the Behavior set to Rigid, then the stress along the length would be the same for small deflections. You have asked this question many times. What did you think the answer was?<\/p>\n","protected":false},"template":"","class_list":["post-199617","reply","type-reply","status-publish","hentry"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"First you would have to change the joint type to one that has two axes because a Revolute joint has only one axis. Try a Universal Joint. Then see if you can apply a Joint Load about two axes. I don&#039;t know. Alternatively, you can definitely put two Revolute Joints in series and have a\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Learning Forum | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug | Ansys Learning Forum\" \/>\n\t\t<meta property=\"og:description\" content=\"First you would have to change the joint type to one that has two axes because a Revolute joint has only one axis. Try a Universal Joint. Then see if you can apply a Joint Load about two axes. I don&#039;t know. Alternatively, you can definitely put two Revolute Joints in series and have a\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/\" \/>\n\t\t<meta property=\"og:image\" content=\"https:\/\/innovationspace.ansys.com\/forum\/forum\/wp-content\/uploads\/forum-uploads\/832\/A6I8EXU1OINF.png\" \/>\n\t\t<meta property=\"og:image:secure_url\" content=\"https:\/\/innovationspace.ansys.com\/forum\/forum\/wp-content\/uploads\/forum-uploads\/832\/A6I8EXU1OINF.png\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2022-03-28T11:19:42+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2022-03-28T11:22:57+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug | Ansys Learning Forum\" \/>\n\t\t<meta name=\"twitter:description\" content=\"First you would have to change the joint type to one that has two axes because a Revolute joint has only one axis. Try a Universal Joint. Then see if you can apply a Joint Load about two axes. I don&#039;t know. Alternatively, you can definitely put two Revolute Joints in series and have a\" \/>\n\t\t<meta name=\"twitter:image\" content=\"https:\/\/innovationspace.ansys.com\/forum\/forum\/wp-content\/uploads\/forum-uploads\/832\/A6I8EXU1OINF.png\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/199617\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/199617\\\/#listItem\",\"name\":\"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/199617\\\/#listItem\",\"position\":2,\"name\":\"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum#listItem\",\"name\":\"Home\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#organization\",\"name\":\"Ansys Learning Forum\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/199617\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/199617\\\/\",\"name\":\"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug | Ansys Learning Forum\",\"description\":\"First you would have to change the joint type to one that has two axes because a Revolute joint has only one axis. Try a Universal Joint. Then see if you can apply a Joint Load about two axes. I don't know. Alternatively, you can definitely put two Revolute Joints in series and have a\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/199617\\\/#breadcrumblist\"},\"datePublished\":\"2022-03-28T11:19:42+00:00\",\"dateModified\":\"2022-03-28T11:22:57+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/\",\"name\":\"Ansys Learning Forum\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug | Ansys Learning Forum","description":"First you would have to change the joint type to one that has two axes because a Revolute joint has only one axis. Try a Universal Joint. Then see if you can apply a Joint Load about two axes. I don't know. Alternatively, you can definitely put two Revolute Joints in series and have a","canonical_url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/forum","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/#listItem","name":"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/#listItem","position":2,"name":"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum#listItem","name":"Home"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/forum\/#organization","name":"Ansys Learning Forum","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/forum\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/#webpage","url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/","name":"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug | Ansys Learning Forum","description":"First you would have to change the joint type to one that has two axes because a Revolute joint has only one axis. Try a Universal Joint. Then see if you can apply a Joint Load about two axes. I don't know. Alternatively, you can definitely put two Revolute Joints in series and have a","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/#breadcrumblist"},"datePublished":"2022-03-28T11:19:42+00:00","dateModified":"2022-03-28T11:22:57+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/forum\/#website","url":"https:\/\/innovationspace.ansys.com\/forum\/","name":"Ansys Learning Forum","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Learning Forum | Ansys Innovation Space","og:type":"article","og:title":"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug | Ansys Learning Forum","og:description":"First you would have to change the joint type to one that has two axes because a Revolute joint has only one axis. Try a Universal Joint. Then see if you can apply a Joint Load about two axes. I don't know. Alternatively, you can definitely put two Revolute Joints in series and have a","og:url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/","og:image":"https:\/\/innovationspace.ansys.com\/forum\/forum\/wp-content\/uploads\/forum-uploads\/832\/A6I8EXU1OINF.png","og:image:secure_url":"https:\/\/innovationspace.ansys.com\/forum\/forum\/wp-content\/uploads\/forum-uploads\/832\/A6I8EXU1OINF.png","article:published_time":"2022-03-28T11:19:42+00:00","article:modified_time":"2022-03-28T11:22:57+00:00","twitter:card":"summary_large_image","twitter:title":"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug | Ansys Learning Forum","twitter:description":"First you would have to change the joint type to one that has two axes because a Revolute joint has only one axis. Try a Universal Joint. Then see if you can apply a Joint Load about two axes. I don't know. Alternatively, you can definitely put two Revolute Joints in series and have a","twitter:image":"https:\/\/innovationspace.ansys.com\/forum\/forum\/wp-content\/uploads\/forum-uploads\/832\/A6I8EXU1OINF.png"},"aioseo_meta_data":{"post_id":"199617","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"content","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":true,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2024-10-25 11:34:32","updated":"2026-08-09 06:30:02","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/forum\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tReply To: Moment Load on Revolute Joint exposes a Mechanical bug\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/forum"},{"label":"Reply To: Moment Load on Revolute Joint exposes a Mechanical bug","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/199617\/"}],"acf":[],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies\/199617","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/types\/reply"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies\/199617\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/media?parent=199617"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}