{"id":189866,"date":"2021-08-25T23:52:55","date_gmt":"2021-08-25T23:52:55","guid":{"rendered":"\/forum\/forums\/reply\/189866\/"},"modified":"2021-08-25T23:54:30","modified_gmt":"2021-08-25T23:54:30","slug":"189866","status":"publish","type":"reply","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/","title":{"rendered":"Reply To: Clamps and bolts Simulation"},"content":{"rendered":"<p>A Pressure load acts normal to the face it is applied to, which is not the same as the force of the wind, which will act along the direction the wind is blowing. You can just assign a force to the faces and use components to define the direction the wind is blowing.  Newer versions of ANSYS allow a pressure to be defined in a direction, which I find odd.<br \/>\nCreating bolt pretension on this configuration with 3 nuts on one bolt requires special preparation.<br \/>\nThe Bolt Pretension load type was designed to work on a bolt with just 1 nut. The shaft is required to have a single face between the head and the nut, separate from the shaft face that is in the nut. It works by splitting that face and pulling the cut faces together to generate the load.<br \/>\nWith three nuts, you will need to split the face of the shaft in six places: on the top and bottom face of each nut. In that way you can apply two Bolt Pretension loads, one between the head and the first nut and another between the second nut and the third nut.<\/p>\n","protected":false},"template":"","class_list":["post-189866","reply","type-reply","status-publish","hentry"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"A Pressure load acts normal to the face it is applied to, which is not the same as the force of the wind, which will act along the direction the wind is blowing. You can just assign a force to the faces and use components to define the direction the wind is blowing. Newer versions\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Learning Forum | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Reply To: Clamps and bolts Simulation | Ansys Learning Forum\" \/>\n\t\t<meta property=\"og:description\" content=\"A Pressure load acts normal to the face it is applied to, which is not the same as the force of the wind, which will act along the direction the wind is blowing. You can just assign a force to the faces and use components to define the direction the wind is blowing. Newer versions\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2021-08-25T23:52:55+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2021-08-25T23:54:30+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Reply To: Clamps and bolts Simulation | Ansys Learning Forum\" \/>\n\t\t<meta name=\"twitter:description\" content=\"A Pressure load acts normal to the face it is applied to, which is not the same as the force of the wind, which will act along the direction the wind is blowing. You can just assign a force to the faces and use components to define the direction the wind is blowing. Newer versions\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/189866\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/189866\\\/#listItem\",\"name\":\"Reply To: Clamps and bolts Simulation\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/189866\\\/#listItem\",\"position\":2,\"name\":\"Reply To: Clamps and bolts Simulation\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum#listItem\",\"name\":\"Home\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#organization\",\"name\":\"Ansys Learning Forum\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/189866\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/189866\\\/\",\"name\":\"Reply To: Clamps and bolts Simulation | Ansys Learning Forum\",\"description\":\"A Pressure load acts normal to the face it is applied to, which is not the same as the force of the wind, which will act along the direction the wind is blowing. You can just assign a force to the faces and use components to define the direction the wind is blowing. Newer versions\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/189866\\\/#breadcrumblist\"},\"datePublished\":\"2021-08-25T23:52:55+00:00\",\"dateModified\":\"2021-08-25T23:54:30+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/\",\"name\":\"Ansys Learning Forum\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"Reply To: Clamps and bolts Simulation | Ansys Learning Forum","description":"A Pressure load acts normal to the face it is applied to, which is not the same as the force of the wind, which will act along the direction the wind is blowing. You can just assign a force to the faces and use components to define the direction the wind is blowing. Newer versions","canonical_url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/forum","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/#listItem","name":"Reply To: Clamps and bolts Simulation"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/#listItem","position":2,"name":"Reply To: Clamps and bolts Simulation","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum#listItem","name":"Home"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/forum\/#organization","name":"Ansys Learning Forum","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/forum\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/#webpage","url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/","name":"Reply To: Clamps and bolts Simulation | Ansys Learning Forum","description":"A Pressure load acts normal to the face it is applied to, which is not the same as the force of the wind, which will act along the direction the wind is blowing. You can just assign a force to the faces and use components to define the direction the wind is blowing. Newer versions","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/#breadcrumblist"},"datePublished":"2021-08-25T23:52:55+00:00","dateModified":"2021-08-25T23:54:30+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/forum\/#website","url":"https:\/\/innovationspace.ansys.com\/forum\/","name":"Ansys Learning Forum","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Learning Forum | Ansys Innovation Space","og:type":"article","og:title":"Reply To: Clamps and bolts Simulation | Ansys Learning Forum","og:description":"A Pressure load acts normal to the face it is applied to, which is not the same as the force of the wind, which will act along the direction the wind is blowing. You can just assign a force to the faces and use components to define the direction the wind is blowing. Newer versions","og:url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/","article:published_time":"2021-08-25T23:52:55+00:00","article:modified_time":"2021-08-25T23:54:30+00:00","twitter:card":"summary_large_image","twitter:title":"Reply To: Clamps and bolts Simulation | Ansys Learning Forum","twitter:description":"A Pressure load acts normal to the face it is applied to, which is not the same as the force of the wind, which will act along the direction the wind is blowing. You can just assign a force to the faces and use components to define the direction the wind is blowing. Newer versions"},"aioseo_meta_data":{"post_id":"189866","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"content","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":true,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2024-10-24 12:02:36","updated":"2026-08-09 02:32:12","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/forum\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tReply To: Clamps and bolts Simulation\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/forum"},{"label":"Reply To: Clamps and bolts Simulation","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/189866\/"}],"acf":[],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies\/189866","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/types\/reply"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies\/189866\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/media?parent=189866"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}