{"id":186291,"date":"2021-07-27T09:56:56","date_gmt":"2021-07-27T09:56:56","guid":{"rendered":"\/forum\/forums\/reply\/186291\/"},"modified":"2021-07-27T09:56:56","modified_gmt":"2021-07-27T09:56:56","slug":"186291","status":"publish","type":"reply","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/","title":{"rendered":"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing"},"content":{"rendered":"<p>If the geometry was precisely created in Solidworks, using the surface of one part to make the other part, the best option is to export a Parasolid from Solidworks and read the Parasolid into DesignModeler. The reason for this is that Solidworks uses the Parasolid kernel and so does DesignModeler. That means there is no translation into a new scheme such as STEP, there is merely a transfer of data.<br \/>\nIf Shared Topology is desired in order to mesh across a common surface shared by two bodies, you must use DesignModeler or SpaceClaim to achieve this effect.<br \/>\nIf the geometry was not created precisely, there are repair tools in SpaceClaim and DesignModeler to try to repair geometry that has problems, but the best approach is to create precise geometry.<\/p>\n","protected":false},"template":"","class_list":["post-186291","reply","type-reply","status-publish","hentry"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"If the geometry was precisely created in Solidworks, using the surface of one part to make the other part, the best option is to export a Parasolid from Solidworks and read the Parasolid into DesignModeler. The reason for this is that Solidworks uses the Parasolid kernel and so does DesignModeler. That means there is no\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Learning Forum | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing | Ansys Learning Forum\" \/>\n\t\t<meta property=\"og:description\" content=\"If the geometry was precisely created in Solidworks, using the surface of one part to make the other part, the best option is to export a Parasolid from Solidworks and read the Parasolid into DesignModeler. The reason for this is that Solidworks uses the Parasolid kernel and so does DesignModeler. That means there is no\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2021-07-27T09:56:56+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2021-07-27T09:56:56+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing | Ansys Learning Forum\" \/>\n\t\t<meta name=\"twitter:description\" content=\"If the geometry was precisely created in Solidworks, using the surface of one part to make the other part, the best option is to export a Parasolid from Solidworks and read the Parasolid into DesignModeler. The reason for this is that Solidworks uses the Parasolid kernel and so does DesignModeler. That means there is no\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/186291\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/186291\\\/#listItem\",\"name\":\"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/186291\\\/#listItem\",\"position\":2,\"name\":\"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum#listItem\",\"name\":\"Home\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#organization\",\"name\":\"Ansys Learning Forum\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/186291\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/186291\\\/\",\"name\":\"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing | Ansys Learning Forum\",\"description\":\"If the geometry was precisely created in Solidworks, using the surface of one part to make the other part, the best option is to export a Parasolid from Solidworks and read the Parasolid into DesignModeler. The reason for this is that Solidworks uses the Parasolid kernel and so does DesignModeler. That means there is no\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/186291\\\/#breadcrumblist\"},\"datePublished\":\"2021-07-27T09:56:56+00:00\",\"dateModified\":\"2021-07-27T09:56:56+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/\",\"name\":\"Ansys Learning Forum\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing | Ansys Learning Forum","description":"If the geometry was precisely created in Solidworks, using the surface of one part to make the other part, the best option is to export a Parasolid from Solidworks and read the Parasolid into DesignModeler. The reason for this is that Solidworks uses the Parasolid kernel and so does DesignModeler. That means there is no","canonical_url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/forum","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/#listItem","name":"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/#listItem","position":2,"name":"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum#listItem","name":"Home"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/forum\/#organization","name":"Ansys Learning Forum","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/forum\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/#webpage","url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/","name":"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing | Ansys Learning Forum","description":"If the geometry was precisely created in Solidworks, using the surface of one part to make the other part, the best option is to export a Parasolid from Solidworks and read the Parasolid into DesignModeler. The reason for this is that Solidworks uses the Parasolid kernel and so does DesignModeler. That means there is no","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/#breadcrumblist"},"datePublished":"2021-07-27T09:56:56+00:00","dateModified":"2021-07-27T09:56:56+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/forum\/#website","url":"https:\/\/innovationspace.ansys.com\/forum\/","name":"Ansys Learning Forum","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Learning Forum | Ansys Innovation Space","og:type":"article","og:title":"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing | Ansys Learning Forum","og:description":"If the geometry was precisely created in Solidworks, using the surface of one part to make the other part, the best option is to export a Parasolid from Solidworks and read the Parasolid into DesignModeler. The reason for this is that Solidworks uses the Parasolid kernel and so does DesignModeler. That means there is no","og:url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/","article:published_time":"2021-07-27T09:56:56+00:00","article:modified_time":"2021-07-27T09:56:56+00:00","twitter:card":"summary_large_image","twitter:title":"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing | Ansys Learning Forum","twitter:description":"If the geometry was precisely created in Solidworks, using the surface of one part to make the other part, the best option is to export a Parasolid from Solidworks and read the Parasolid into DesignModeler. The reason for this is that Solidworks uses the Parasolid kernel and so does DesignModeler. That means there is no"},"aioseo_meta_data":{"post_id":"186291","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"content","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":true,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2024-10-24 04:12:47","updated":"2026-08-09 00:27:32","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/forum\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tReply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/forum"},{"label":"Reply To: Extra parts are forming at the contact between two curved bodies when geometry transfers to meshing","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/186291\/"}],"acf":[],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies\/186291","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/types\/reply"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies\/186291\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/media?parent=186291"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}