{"id":183416,"date":"2021-07-28T02:26:07","date_gmt":"2021-07-28T02:26:07","guid":{"rendered":"\/forum\/forums\/reply\/183416\/"},"modified":"2021-07-28T02:26:07","modified_gmt":"2021-07-28T02:26:07","slug":"183416","status":"publish","type":"reply","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/","title":{"rendered":"Reply To: Measuring of thermal conductivity"},"content":{"rendered":"<p>Thanks for your feedback. <br \/>\nI&#8217;m using ACP post to model the geometry that contains the fibre and matrix. Here, the material inputs for fibre is just the form of sheets. The fibres amount can be applied using the required volume fractions over the whole composite material sample. Volume fractions are formulated by the thickness of the fibre. Later, ACP outputs are exported to the steady state thermal to calculate the temperature-difference between the surfaces that gives the thermal conductivity of the composite with respect to known heat flux  and area. I&#8217;m not sure the procedure is properly reflecting the method of calculating conductivity of composite.  If I increase the layers number by reducing the fibre thickness, fibre alignment is still remaining the same. How to properly model the two different materials in a composite manner, then? <br \/>\nRegards<br \/>\nJuwel<\/p>\n","protected":false},"template":"","class_list":["post-183416","reply","type-reply","status-publish","hentry"],"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 4.9.10 - aioseo.com -->\n\t<meta name=\"description\" content=\"Thanks for your feedback. I&#039;m using ACP post to model the geometry that contains the fibre and matrix. Here, the material inputs for fibre is just the form of sheets. The fibres amount can be applied using the required volume fractions over the whole composite material sample. Volume fractions are formulated by the thickness of\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<link rel=\"canonical\" href=\"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 4.9.10\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"Ansys Learning Forum | Ansys Innovation Space\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Reply To: Measuring of thermal conductivity | Ansys Learning Forum\" \/>\n\t\t<meta property=\"og:description\" content=\"Thanks for your feedback. I&#039;m using ACP post to model the geometry that contains the fibre and matrix. Here, the material inputs for fibre is just the form of sheets. The fibres amount can be applied using the required volume fractions over the whole composite material sample. Volume fractions are formulated by the thickness of\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2021-07-28T02:26:07+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2021-07-28T02:26:07+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Reply To: Measuring of thermal conductivity | Ansys Learning Forum\" \/>\n\t\t<meta name=\"twitter:description\" content=\"Thanks for your feedback. I&#039;m using ACP post to model the geometry that contains the fibre and matrix. Here, the material inputs for fibre is just the form of sheets. The fibres amount can be applied using the required volume fractions over the whole composite material sample. Volume fractions are formulated by the thickness of\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/183416\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/183416\\\/#listItem\",\"name\":\"Reply To: Measuring of thermal conductivity\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/183416\\\/#listItem\",\"position\":2,\"name\":\"Reply To: Measuring of thermal conductivity\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum#listItem\",\"name\":\"Home\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#organization\",\"name\":\"Ansys Learning Forum\",\"description\":\"Ansys Innovation Space\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/183416\\\/#webpage\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/183416\\\/\",\"name\":\"Reply To: Measuring of thermal conductivity | Ansys Learning Forum\",\"description\":\"Thanks for your feedback. I'm using ACP post to model the geometry that contains the fibre and matrix. Here, the material inputs for fibre is just the form of sheets. The fibres amount can be applied using the required volume fractions over the whole composite material sample. Volume fractions are formulated by the thickness of\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/forums\\\/reply\\\/183416\\\/#breadcrumblist\"},\"datePublished\":\"2021-07-28T02:26:07+00:00\",\"dateModified\":\"2021-07-28T02:26:07+00:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#website\",\"url\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/\",\"name\":\"Ansys Learning Forum\",\"description\":\"Ansys Innovation Space\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/innovationspace.ansys.com\\\/forum\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"Reply To: Measuring of thermal conductivity | Ansys Learning Forum","description":"Thanks for your feedback. I'm using ACP post to model the geometry that contains the fibre and matrix. Here, the material inputs for fibre is just the form of sheets. The fibres amount can be applied using the required volume fractions over the whole composite material sample. Volume fractions are formulated by the thickness of","canonical_url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BreadcrumbList","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum#listItem","position":1,"name":"Home","item":"https:\/\/innovationspace.ansys.com\/forum","nextItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/#listItem","name":"Reply To: Measuring of thermal conductivity"}},{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/#listItem","position":2,"name":"Reply To: Measuring of thermal conductivity","previousItem":{"@type":"ListItem","@id":"https:\/\/innovationspace.ansys.com\/forum#listItem","name":"Home"}}]},{"@type":"Organization","@id":"https:\/\/innovationspace.ansys.com\/forum\/#organization","name":"Ansys Learning Forum","description":"Ansys Innovation Space","url":"https:\/\/innovationspace.ansys.com\/forum\/"},{"@type":"WebPage","@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/#webpage","url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/","name":"Reply To: Measuring of thermal conductivity | Ansys Learning Forum","description":"Thanks for your feedback. I'm using ACP post to model the geometry that contains the fibre and matrix. Here, the material inputs for fibre is just the form of sheets. The fibres amount can be applied using the required volume fractions over the whole composite material sample. Volume fractions are formulated by the thickness of","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/#website"},"breadcrumb":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/#breadcrumblist"},"datePublished":"2021-07-28T02:26:07+00:00","dateModified":"2021-07-28T02:26:07+00:00"},{"@type":"WebSite","@id":"https:\/\/innovationspace.ansys.com\/forum\/#website","url":"https:\/\/innovationspace.ansys.com\/forum\/","name":"Ansys Learning Forum","description":"Ansys Innovation Space","inLanguage":"en-US","publisher":{"@id":"https:\/\/innovationspace.ansys.com\/forum\/#organization"}}]},"og:locale":"en_US","og:site_name":"Ansys Learning Forum | Ansys Innovation Space","og:type":"article","og:title":"Reply To: Measuring of thermal conductivity | Ansys Learning Forum","og:description":"Thanks for your feedback. I'm using ACP post to model the geometry that contains the fibre and matrix. Here, the material inputs for fibre is just the form of sheets. The fibres amount can be applied using the required volume fractions over the whole composite material sample. Volume fractions are formulated by the thickness of","og:url":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/","article:published_time":"2021-07-28T02:26:07+00:00","article:modified_time":"2021-07-28T02:26:07+00:00","twitter:card":"summary_large_image","twitter:title":"Reply To: Measuring of thermal conductivity | Ansys Learning Forum","twitter:description":"Thanks for your feedback. I'm using ACP post to model the geometry that contains the fibre and matrix. Here, the material inputs for fibre is just the form of sheets. The fibres amount can be applied using the required volume fractions over the whole composite material sample. Volume fractions are formulated by the thickness of"},"aioseo_meta_data":{"post_id":"183416","title":null,"description":null,"keywords":null,"keyphrases":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"content","og_image_url":null,"og_image_width":null,"og_image_height":null,"og_image_custom_url":null,"og_image_custom_fields":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":true,"twitter_card":"default","twitter_image_type":"default","twitter_image_url":null,"twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_title":null,"twitter_description":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"schema_type":"default","schema_type_options":null,"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"created":"2024-10-23 19:32:32","updated":"2026-09-02 15:01:28","ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/innovationspace.ansys.com\/forum\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tReply To: Measuring of thermal conductivity\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/innovationspace.ansys.com\/forum"},{"label":"Reply To: Measuring of thermal conductivity","link":"https:\/\/innovationspace.ansys.com\/forum\/forums\/reply\/183416\/"}],"acf":[],"_links":{"self":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies\/183416","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies"}],"about":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/types\/reply"}],"version-history":[{"count":0,"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/replies\/183416\/revisions"}],"wp:attachment":[{"href":"https:\/\/innovationspace.ansys.com\/forum\/wp-json\/wp\/v2\/media?parent=183416"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}